Tejun Heo wrote:
Hello, libata developers.
This document describes current libata EH. (I have decided to keep
ATA exceptions doc, this and yet-to-be-posted new EH doc separate.) I
hope this can help EH discussion.
It would be nice to add this to Documentation/DocBook/libata.tmpl, and
update it as work in libata EH progresses... If you were motivated... :)
libata EH
======================================
This document describes how errors are handled under current libata.
Where current means ALL head of libata-dev-2.6 git tree as of
2005-08-26, commit ab9b494f6aeab24eda2e6462e2fe73789c288e73. Readers
are advised to read SCSI EH and ATA exceptions documents first.
[1] Origins of commands
In libata, a command is represented with struct ata_queued_cmd or qc.
qc's are preallocated during port initialization and repetitively used
for command executions. Currently only one qc is allocated per port
but yet-to-be-merged NCQ branch allocates one for each tag and maps
each qc to NCQ tag 1-to-1.
libata commands can originate from two sources - libata itself and
SCSI midlayer. libata internal commands are used for initialization
and error handling. All normal blk requests and commands for SCSI
emulation are passed as SCSI commands through queuecommand callback of
SCSI host template.
[2] How commands are issued
[2-1] Internal commands
First, qc is allocated and initialized using ata_qc_new_init().
Although ata_qc_new_init() doesn't implement any wait or retry
mechanism when qc is not available, internal commands are currently
issued only during initialization and error recovery, so no other
command is active and allocation is guaranteed to succeed.
Once allocated qc's taskfile is initialized for the command to be
executed. qc currently has two mechanisms to notify completion. One
is via qc->complete_fn() callback and the other is completion
qc->waiting. Internal commands always use qc->waiting.
I would note that ->complete_fn() is the asynchronous path, and
qc->waiting is the synchronous (sleeping in process context) path.
Once initialization is complete, host_set lock is acquired and the qc
is issued.
[2-2] SCSI commands
All libata drivers use ata_scsi_queuecmd() as hostt->queuecommand
callback. scmds can either be simulated or translated. No qc is
involved in processing a simulated scmd. The result is computed right
away and the scmd is completed.
For a translated scmd, ata_qc_new_init() is invoked to allocate a qc
and the scmd is translated into the qc. SCSI midlayer's completion
notification function pointer is stored into qc->scsidone.
qc->complete_fn() callback is used for completion notification. ATA
commands use ata_scsi_qc_complete() while ATAPI commands use
atapi_qc_complete(). Both functions end up calling qc->scsidone to
notify upper layer when the qc is finished. After translation is
completed, the qc is issued with ata_qc_issue().
Note that SCSI midlayer invokes hostt->queuecommand while holding
host_set lock, so all above occur while holding host_set lock.
[3] How commands are processed
Depending on which protocol and which controller are used, commands
are processed differently. For the purpose of discussion, a
controller which uses taskfile interface and all standard callbacks is
assumed.
Currently 6 ATA command protocols are used. They can be sorted into
the following four categories according to how they are processed.
a. ATA NO DATA or DMA
ATA_PROT_NODATA and ATA_PROT_DMA fall into this category. These
types of commands don't require any software intervention once
issued. Device will raise interrupt on completion.
b. ATA PIO
ATA_PROT_PIO is in this category. libata currently implements PIO
with polling. ATA_NIEN bit is set to turn off interrupt and
pio_task on ata_wq performs polling and IO.
c. ATAPI NODATA or DMA
ATA_PROT_ATAPI_NODATA and ATA_PROT_ATAPI_DMA are in this category.
packet_task is used to poll BSY bit after issuing PACKET command.
Once BSY is turned off by the device, packet_task transfers CDB
and hands off processing to interrupt handler.
d. ATAPI PIO
ATA_PROT_ATAPI is in this category. ATA_NIEN bit is set and, as
in #c, packet_task submits cdb. However, after submitting cdb,
further processing (data transfer) is handed off to pio_task.
[4] How commands are completed
Once issued, all qc's are either completed with ata_qc_complete() or
time out. For commands which are handled by interrupts,
ata_host_intr() invokes ata_qc_complete(), and, for PIO tasks,
pio_task invokes ata_qc_complete(). In error cases, packet_task may
also complete commands.
ata_qc_complete() does the following.
1. DMA memory is unmapped.
2. ATA_QCFLAG_ACTIVE is clared from qc->flags.
3. qc->complete_fn() callback is invoked. If the return value of the
callback is not zero. Completion is short circuited and
ata_qc_complete() returns.
4. __ata_qc_complete() is called, which does
1. qc->flags is cleared to zero.
2. ap->active_tag and qc->tag are poisoned.
3. qc->waiting is claread & completed (in that order).
4. qc is deallocated by clearing appropriate bit in ap->qactive.
So, it basically notifies upper layer and deallocates qc. One
exception is short-circuit path in #3 which is used by
atapi_qc_complete().
For all non-ATAPI commands, whether it fails or not, almost the same
code path is taken and very little error handling takes place. A qc
is completed with success status if it succeeded, with failed status
otherwise.
However, failed ATAPI commands require more handling as REQUEST SENSE
is needed to acquire sense data. If an ATAPI command fails,
ata_qc_complete() is invoked with error status, which in turn invokes
atapi_qc_complete() via qc->complete_fn() callback.
This makes atapi_qc_complete() set scmd->result to
SAM_STAT_CHECK_CONDITION, complete the scmd and return 1. As the
sense data is empty but scmd->result is CHECK CONDITION, SCSI midlayer
will invoke EH for the scmd, and returning 1 makes ata_qc_complete()
to return without deallocating the qc. This leads us to
ata_scsi_error() with partially completed qc.
[5] ata_scsi_error()
ata_scsi_error() is the current hostt->eh_strategy_handler() for
libata. As discussed above, this will be entered in two cases -
timeout and ATAPI error completion. This function calls low level
libata driver's eng_timeout() callback, the standard callback for
which is ata_eng_timeout(). It checks if a qc is active and calls
ata_qc_timeout() on the qc if so. Actual error handling occurs in
ata_qc_timeout().
If EH is invoked for timeout, ata_qc_timeout() stops BMDMA and
completes the qc. Note that as we're currently in EH, we cannot call
scsi_done. As described in SCSI EH doc, a recovered scmd should be
either retried with scsi_queue_insert() or finished with
scsi_finish_command(). Here, we override qc->scsidone with
scsi_finish_command() and calls ata_qc_complete().
If EH is invoked due to a failed ATAPI qc, the qc here is completed
but not deallocated. The purpose of this half-completion is to use
the qc as place holder to make EH code reach this place. This is a
bit hackish, but it works.
Once control reaches here, the qc is deallocated by invoking
__ata_qc_complete() explicitly. Then, internal qc for REQUEST SENSE
is issued. Once sense data is acquired, scmd is finished by directly
invoking scsi_finish_command() on the scmd. Note that as we already
have completed and deallocated the qc which was associated with the
scmd, we don't need to/cannot call ata_qc_complete() again.
[6] Problems with the current EH
- When handling timeouts, no action is taken to make device forget
about the timed out command and ready for new commands.
- EH handling via ata_scsi_error() is not properly protected from
usual command processing. On EH entrance, the device is not in
quiescent state. Timed out commands may succeed or fail any time.
pio_task and atapi_task may still be running.
[tangent] we might want a flush_scheduled_work() in the EH
- Too weak error recovery. Devices / controllers causing HSM
mismatch errors and other errors quite often require reset to
return to known state. Also, advanced error handling is necessary
to support features like NCQ and hotplug.
- ATA errors are directly handled in the interrupt handler and PIO
errors in pio_task. This is problematic for advanced error
handling for the following reasons.
First, advanced error handling often requires context and internal
qc execution.
Second, even a simple failure (say, CRC error) needs information
gathering and could trigger complex error handling (say, resetting
& reconfiguring). Having multiple code paths to gather
information, enter EH and trigger actions makes life painful.
Third, scattered EH code makes implementing low level drivers
difficult. Low level drivers override libata callbacks. If EH is
scattered over several places, each affected callbacks should
perform its part of error handling. This can be error prone and
painful.
One of the biggest overall problems is the lack of distinction between
an ATA device error and other errors. ATA device errors are easy, since
the device is in a known state.
Currently libata fakes PCI/ATA bus errors by passing ATA_ERR to
ata_qc_complete(), and some of the associated machinery only knows about
ATA errors. Passing ATA_ERR to ata_qc_completely() is definitely ugly,
and wants fixing. And if the error is not an ATA device error, then the
device (and buses) are in an unknown state, at that point.
Jeff
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
