On Mon, Jan 15, 2007 at 11:26:59AM -0500, Dailey, Nate wrote: > Here's a patch that does what you suggest. > > Because the default cache line size on my system is 0x10, I tested the > patch by checking against this value rather than 0... it worked as > expected. > > This patch is against 2.6.19.2 that I just downloaded from kernel.org. I > actually tested on RHEL4 update 4, a 2.6.9 kernel, but I'll try building > the 2.6.19.2 on my system to make sure it works in that version as well. > > Nate
Hi Nate, The patch looks fine, except that your mailer wrapped the lines. Try sending it as a text attachment instead. Thanks jeremy > > --- sata_vsc.c.orig 2007-01-15 11:06:17.000000000 -0500 > +++ sata_vsc.c 2007-01-15 11:10:29.000000000 -0500 > @@ -340,6 +340,7 @@ static int __devinit vsc_sata_init_one ( > int pci_dev_busy = 0; > void __iomem *mmio_base; > int rc; > + u8 cls; > > if (!printed_version++) > dev_printk(KERN_DEBUG, &pdev->dev, "version " > DRV_VERSION "\n"); > @@ -389,9 +390,13 @@ static int __devinit vsc_sata_init_one ( > base = (unsigned long) mmio_base; > > /* > - * Due to a bug in the chip, the default cache line size can't > be used > + * Due to a bug in the chip, the default cache line size can't > be > + * used (unless the default is non-zero). > */ > - pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80); > + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cls); > + if (cls == 0x00) { > + pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80); > + } > > probe_ent->sht = &vsc_sata_sht; > probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html