[PATCH] cs5530/sc1200: DMA support cleanup
sc1200.c:
* remove open-coded variant of ide_dma_host_off() (== ->dma_host_off),
it is not needed because ->dma_off_quietly calls ->dma_host_off
* use ->dma_host_on (== ide_dma_host_on() for this driver) instead of
open-coded variant, call it from the users of sc1200_config_dma2()
[ there is no need to call ->dma_host_on in sc1200_config_dma() because
core code takes care of calling ->ide_dma_on on successful execution
of ->ide_dma_check ]
* add comment about ->tuneproc interface abuse
cs5530.c/sc1200.c:
* core code takes care of calling ->dma_off_quietly before calling
->ide_dma_check so there is no need to call it in ->ide_dma_check methods
* bump driver version
Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>
---
drivers/ide/pci/cs5530.c | 7 +------
drivers/ide/pci/sc1200.c | 27 ++++++++++++---------------
2 files changed, 13 insertions(+), 21 deletions(-)
Index: b/drivers/ide/pci/cs5530.c
===================================================================
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/cs5530.c Version 0.71 Mar 10 2007
+ * linux/drivers/ide/pci/cs5530.c Version 0.72 Mar 10 2007
*
* Copyright (C) 2000 Andre Hedrick <[EMAIL PROTECTED]>
* Copyright (C) 2000 Mark Lord <[EMAIL PROTECTED]>
@@ -141,11 +141,6 @@ static int cs5530_config_dma(ide_drive_t
unsigned long basereg;
u8 unit = drive->dn & 1, mode = 0;
- /*
- * Default to DMA-off in case we run into trouble here.
- */
- hwif->dma_off_quietly(drive);
-
if (ide_use_dma(drive))
mode = ide_max_dma_mode(drive);
Index: b/drivers/ide/pci/sc1200.c
===================================================================
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/sc1200.c Version 0.92 Mar 10 2007
+ * linux/drivers/ide/pci/sc1200.c Version 0.93 Mar 10 2007
*
* Copyright (C) 2000-2002 Mark Lord <[EMAIL PROTECTED]>
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
@@ -137,12 +137,6 @@ static int sc1200_config_dma2 (ide_drive
unsigned int basereg = hwif->channel ? 0x50 : 0x40;
/*
- * Default to DMA-off in case we run into trouble here.
- */
- hwif->dma_off_quietly(drive); /* turn off DMA while we fiddle */
- outb(inb(hwif->dma_base+2)&~(unit?0x40:0x20), hwif->dma_base+2); /*
clear DMA_capable bit */
-
- /*
* Tell the drive to switch to the new mode; abort on failure.
*/
if (!mode || sc1200_set_xfer_mode(drive, mode)) {
@@ -217,8 +211,6 @@ static int sc1200_config_dma2 (ide_drive
pci_write_config_dword(hwif->pci_dev, basereg+12, timings);
}
- outb(inb(hwif->dma_base+2)|(unit?0x40:0x20), hwif->dma_base+2); /* set
DMA_capable bit */
-
return 0; /* success */
}
@@ -277,6 +269,9 @@ static void sc1200_tuneproc (ide_drive_t
static byte modes[5] = {XFER_PIO_0, XFER_PIO_1, XFER_PIO_2,
XFER_PIO_3, XFER_PIO_4};
int mode = -1;
+ /*
+ * bad abuse of ->tuneproc interface
+ */
switch (pio) {
case 200: mode = XFER_UDMA_0; break;
case 201: mode = XFER_UDMA_1; break;
@@ -287,7 +282,9 @@ static void sc1200_tuneproc (ide_drive_t
}
if (mode != -1) {
printk("SC1200: %s: changing (U)DMA mode\n", drive->name);
- (void)sc1200_config_dma2(drive, mode);
+ hwif->dma_off_quietly(drive);
+ if (sc1200_config_dma2(drive, mode) == 0)
+ hwif->dma_host_on(drive);
return;
}
@@ -421,12 +418,12 @@ static int sc1200_resume (struct pci_dev
for (d = 0; d < MAX_DRIVES; ++d) {
ide_drive_t *drive = &(hwif->drives[d]);
if (drive->present && !__ide_dma_bad_drive(drive)) {
- int was_using_dma = drive->using_dma;
+ int enable_dma = drive->using_dma;
hwif->dma_off_quietly(drive);
- sc1200_config_dma(drive);
- if (!was_using_dma && drive->using_dma) {
- hwif->dma_off_quietly(drive);
- }
+ if (sc1200_config_dma(drive))
+ enable_dma = 0;
+ if (enable_dma)
+ hwif->dma_host_on(drive);
}
}
}
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
