Stephen Hemminger wrote:
This is a new drive, so I suspect some driver incompatibility between the
driver (AHCI) and the hard drive (WD Raptor 10K 74G).
Driver incompatibilities between the driver (LLDD or libata-core) and a
hard drive are extremely rare.
The most common problem on modern SATA drives is drive firmware bugs, at
the moment.
[ 841.645699] ata1.00: exception Emask 0x10 SAct 0x2 SErr 0x400100 action 0x2
frozen
[ 841.645708] ata1.00: (irq_stat 0x08000000, interface fatal error)
[ 841.645719] ata1.00: cmd 61/00:08:17:31:f1/04:00:03:00:00/40 tag 1 cdb 0x0
data 524288 out
[ 841.645721] res 40/00:18:5f:fa:b9/00:00:01:00:00/40 Emask 0x10 (ATA
bus error)
[ 841.947855] ata1: soft resetting port
[ 842.447515] ata1: softreset failed (1st FIS failed)
[ 842.447526] ata1: softreset failed, retrying in 5 secs
[ 847.445028] ata1: hard resetting port
[ 854.938851] ata1: port is slow to respond, please be patient (Status 0x80)
[ 877.923808] ata1: port failed to respond (30 secs, Status 0x80)
[ 877.923816] ata1: COMRESET failed (device not ready)
[ 877.923822] ata1: hardreset failed, retrying in 5 secs
[ 882.921328] ata1: hard resetting port
[ 883.377028] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 883.391971] ata1.00: configured for UDMA/133
[ 883.391992] ata1: EH complete
[ 883.392186] SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
[ 883.392381] sda: Write Protect is off
[ 883.392387] sda: Mode Sense: 00 3a 00 00
[ 883.392594] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 970.422983] ata1.00: exception Emask 0x10 SAct 0x7 SErr 0x400100 action 0x2
frozen
[ 970.422993] ata1.00: (irq_stat 0x08000000, interface fatal error)
[ 970.423005] ata1.00: cmd 61/a8:00:0f:1d:cb/02:00:01:00:00/40 tag 0 cdb 0x0
data 348160 out
[ 970.423008] res 40/00:08:bf:24:cb/00:00:01:00:00/40 Emask 0x10 (ATA
bus error)
[ 970.423018] ata1.00: cmd 61/a8:08:bf:24:cb/00:00:01:00:00/40 tag 1 cdb 0x0
data 86016 out
[ 970.423021] res 40/00:08:bf:24:cb/00:00:01:00:00/40 Emask 0x10 (ATA
bus error)
[ 970.423031] ata1.00: cmd 61/08:10:97:41:c5/00:00:03:00:00/40 tag 2 cdb 0x0
data 4096 out
[ 970.423034] res 40/00:08:bf:24:cb/00:00:01:00:00/40 Emask 0x10 (ATA
bus error)
The PHY is crapping itself. The port headers may be damaged on the
drive or motherboard, or (most likely) you need a new cable. SATA
cables in particular are known to be lame.
Try different ports and cables.
You can also see what happens if you disable NCQ
(http://linux-ata.org/faq.html#ncq). Though given the interface errors,
if disabling NCQ solves problems, it /may/ just be that you slowed
things down enough to work, not that the drive firmware is bad.
Jeff
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
