On Sun, May 20, 2007 19:17, Tejun Heo wrote: > Indan Zupancic wrote: >> So over all it takes half a second longer to detect the disk, but >> because everything waits on it, it takes more than three seconds >> longer to resume. > > Eeeek. Extra three secs doesn't sound too hot. :-(
Hey, without your reset fix it was 11 seconds slower. ;-) Well, it used to be around 1.7 seconds to resume, and now (after the fixes) it's 2.8 (according to the dmesg timestamps). But the first timestamp printed was 0.7, and now it's 2.1, so I don't know if it's a real slowdown or that the timer is set correctly earlier. That was with 2.19 btw, I don't know what happened in the meantime. I suspect the timer changes. To know for sure I'd need to boot an older kernel and measure resume time with a stopwatch. >> Setting manage_start_stop to 0 fixes it and is good enough for me, I >> didn't notice anything bad yet because of the unmanaged >> stop. Implementing background spin up will fix it too. > > Just commenting out sd_resume() would be a better solution for your > case tho. I like your idea below more. ;-) >>>> Everything seems to work fine without sd_resume(), so why is it needed? >>> Because not all disks spin up without being told to do so and like it or >>> not spinning disks up on resume is the default behavior. As I wrote in >>> the other reply, it would be worthwhile to make it configurable. >> >> Not even after they receive a read command? Ugh. > > After receiving a command which requires media access, they do. What > I was saying is that the current default behavior is to spin up all > devices on resume and part of that is achieved by sd_resume(). > > Hmmm... skipping START_STOP during sd_resume() actually is a pretty > good solution for ATA devices. I'll think about it. I can't speak for others, but for me this would fix all regressions and even disk spin up seems half a second faster without the START_STOP. It would also solve the laptopmode thing, not unnecessarily spinning up disks that don't need to be (if the hardware doesn't do it). Greetings, Indan - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html