And a few trivial documentation patches.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
upstream-linus
to receive the following updates:
drivers/ata/libata-scsi.c | 5 ++-
drivers/ata/pata_artop.c | 2 +-
drivers/ata/pata_hpt37x.c | 27 ++++++++++---------------
drivers/ata/pata_it821x.c | 3 +-
drivers/ata/pata_scc.c | 46 ++++++++++++++++++++++++++-----------------
drivers/ata/pata_via.c | 9 ++++---
drivers/ata/sata_mv.c | 44 ++++++++++++++++++++++++++++++++++++++++++
drivers/ata/sata_promise.c | 2 +-
drivers/ata/sata_sis.c | 2 +-
drivers/ata/sata_via.c | 3 ++
10 files changed, 98 insertions(+), 45 deletions(-)
Alan Cox (2):
pata: Trivia
pata_hpt37x: Further improvements based on the IDE updates and vendor
drivers
Jeff Garzik (4):
[libata] sata_promise: fix flags typo
[libata] sata_mv: add TODO list
[libata] Fix decoding of 6-byte commands
[libata] sata_via, pata_via: Add PCI IDs.
Tony Breeds (1):
Fix build failure for drivers/ata/pata_scc.c
Uwe Koziolek (1):
libata: sata_sis fixes
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 242c43e..b3900cf 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1050,14 +1050,15 @@ static unsigned int ata_scsi_flush_xlat(struct
ata_queued_cmd *qc)
static void scsi_6_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
{
u64 lba = 0;
- u32 len = 0;
+ u32 len;
VPRINTK("six-byte command\n");
+ lba |= ((u64)(cdb[1] & 0x1f)) << 16;
lba |= ((u64)cdb[2]) << 8;
lba |= ((u64)cdb[3]);
- len |= ((u32)cdb[4]);
+ len = cdb[4];
*plba = lba;
*plen = len;
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 7b4810c..03b6ddd 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -97,7 +97,7 @@ static int artop6260_pre_reset(struct ata_port *ap, unsigned
long deadline)
* artop6260_cable_detect - identify cable type
* @ap: Port
*
- * Identify the cable type for the ARTOp interface in question
+ * Identify the cable type for the ARTOP interface in question
*/
static int artop6260_cable_detect(struct ata_port *ap)
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index a54c174..6446735 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -26,7 +26,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.6.5"
+#define DRV_VERSION "0.6.6"
struct hpt_clock {
u8 xfer_speed;
@@ -931,15 +931,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const
struct pci_device_id *id)
.udma_mask = 0x7f,
.port_ops = &hpt372_port_ops
};
- /* HPT371, 372 and friends - UDMA100 at 50MHz clock */
- static const struct ata_port_info info_hpt372_50 = {
- .sht = &hpt37x_sht,
- .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
- .pio_mask = 0x1f,
- .mwdma_mask = 0x07,
- .udma_mask = 0x3f,
- .port_ops = &hpt372_port_ops
- };
/* HPT374 - UDMA133 */
static const struct ata_port_info info_hpt374 = {
.sht = &hpt37x_sht,
@@ -1098,17 +1089,21 @@ static int hpt37x_init_one(struct pci_dev *dev, const
struct pci_device_id *id)
* use a 50MHz DPLL by choice
*/
unsigned int f_low, f_high;
- int adjust;
+ int dpll, adjust;
- clock_slot = 2;
+ /* Compute DPLL */
+ dpll = 2;
if (port->udma_mask & 0xE0)
- clock_slot = 3;
+ dpll = 3;
- f_low = (MHz[clock_slot] * chip_table->base) / 192;
+ f_low = (MHz[clock_slot] * 48) / MHz[dpll];
f_high = f_low + 2;
+ if (clock_slot > 1)
+ f_high += 2;
/* Select the DPLL clock. */
pci_write_config_byte(dev, 0x5b, 0x21);
+ pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
for(adjust = 0; adjust < 8; adjust++) {
if (hpt37x_calibrate_dpll(dev))
@@ -1124,12 +1119,12 @@ static int hpt37x_init_one(struct pci_dev *dev, const
struct pci_device_id *id)
printk(KERN_WARNING "hpt37x: DPLL did not
stabilize.\n");
return -ENODEV;
}
- if (clock_slot == 3)
+ if (dpll == 3)
private_data = (void *)hpt37x_timings_66;
else
private_data = (void *)hpt37x_timings_50;
- printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n",
MHz[clock_slot]);
+ printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n",
MHz[dpll]);
} else {
private_data = (void *)chip_table->clocks[clock_slot];
/*
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index ff9a6fd..b3456d7 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -1,5 +1,5 @@
/*
- * ata-it821x.c - IT821x PATA for new ATA layer
+ * pata_it821x.c - IT821x PATA for new ATA layer
* (C) 2005 Red Hat Inc
* Alan Cox <[EMAIL PROTECTED]>
*
@@ -65,7 +65,6 @@
*
* TODO
* - ATAPI and other speed filtering
- * - Command filter in smart mode
* - RAID configuration ioctls
*/
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index aa138d2..61502bc 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -489,23 +489,26 @@ static unsigned int scc_devchk (struct ata_port *ap,
* Note: Original code is ata_bus_post_reset().
*/
-static void scc_bus_post_reset (struct ata_port *ap, unsigned int devmask)
+static int scc_bus_post_reset(struct ata_port *ap, unsigned int devmask,
+ unsigned long deadline)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int dev0 = devmask & (1 << 0);
unsigned int dev1 = devmask & (1 << 1);
- unsigned long timeout;
+ int rc;
/* if device 0 was found in ata_devchk, wait for its
* BSY bit to clear
*/
- if (dev0)
- ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+ if (dev0) {
+ rc = ata_wait_ready(ap, deadline);
+ if (rc && rc != -ENODEV)
+ return rc;
+ }
/* if device 1 was found in ata_devchk, wait for
* register access, then wait for BSY to clear
*/
- timeout = jiffies + ATA_TMOUT_BOOT;
while (dev1) {
u8 nsect, lbal;
@@ -514,14 +517,15 @@ static void scc_bus_post_reset (struct ata_port *ap,
unsigned int devmask)
lbal = in_be32(ioaddr->lbal_addr);
if ((nsect == 1) && (lbal == 1))
break;
- if (time_after(jiffies, timeout)) {
- dev1 = 0;
- break;
- }
+ if (time_after(jiffies, deadline))
+ return -EBUSY;
msleep(50); /* give drive a breather */
}
- if (dev1)
- ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+ if (dev1) {
+ rc = ata_wait_ready(ap, deadline);
+ if (rc && rc != -ENODEV)
+ return rc;
+ }
/* is all this really necessary? */
ap->ops->dev_select(ap, 0);
@@ -529,6 +533,8 @@ static void scc_bus_post_reset (struct ata_port *ap,
unsigned int devmask)
ap->ops->dev_select(ap, 1);
if (dev0)
ap->ops->dev_select(ap, 0);
+
+ return 0;
}
/**
@@ -537,8 +543,8 @@ static void scc_bus_post_reset (struct ata_port *ap,
unsigned int devmask)
* Note: Original code is ata_bus_softreset().
*/
-static unsigned int scc_bus_softreset (struct ata_port *ap,
- unsigned int devmask)
+static unsigned int scc_bus_softreset(struct ata_port *ap, unsigned int
devmask,
+ unsigned long deadline)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
@@ -570,7 +576,7 @@ static unsigned int scc_bus_softreset (struct ata_port *ap,
if (scc_check_status(ap) == 0xFF)
return 0;
- scc_bus_post_reset(ap, devmask);
+ scc_bus_post_reset(ap, devmask, deadline);
return 0;
}
@@ -579,11 +585,13 @@ static unsigned int scc_bus_softreset (struct ata_port
*ap,
* scc_std_softreset - reset host port via ATA SRST
* @ap: port to reset
* @classes: resulting classes of attached devices
+ * @deadline: deadline jiffies for the operation
*
* Note: Original code is ata_std_softreset().
*/
-static int scc_std_softreset (struct ata_port *ap, unsigned int *classes)
+static int scc_std_softreset (struct ata_port *ap, unsigned int *classes,
+ unsigned long deadline)
{
unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
unsigned int devmask = 0, err_mask;
@@ -607,7 +615,7 @@ static int scc_std_softreset (struct ata_port *ap, unsigned
int *classes)
/* issue bus reset */
DPRINTK("about to softreset, devmask=%x\n", devmask);
- err_mask = scc_bus_softreset(ap, devmask);
+ err_mask = scc_bus_softreset(ap, devmask, deadline);
if (err_mask) {
ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n",
err_mask);
@@ -676,10 +684,11 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc)
if (reg & INTSTS_BMSINT) {
unsigned int classes;
+ unsigned long deadline = jiffies + ATA_TMOUT_BOOT;
printk(KERN_WARNING "%s: Internal Bus Error\n",
DRV_NAME);
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT);
/* TBD: SW reset */
- scc_std_softreset(ap, &classes);
+ scc_std_softreset(ap, &classes, deadline);
continue;
}
@@ -862,9 +871,10 @@ static void scc_bmdma_freeze (struct ata_port *ap)
/**
* scc_pata_prereset - prepare for reset
* @ap: ATA port to be reset
+ * @deadline: deadline jiffies for the operation
*/
-static int scc_pata_prereset (struct ata_port *ap, unsigned long deadline)
+static int scc_pata_prereset(struct ata_port *ap, unsigned long deadline)
{
ap->cbl = ATA_CBL_PATA80;
return ata_std_prereset(ap, deadline);
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 708dfc0..a8462f1 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -621,10 +621,11 @@ static int via_reinit_one(struct pci_dev *pdev)
#endif
static const struct pci_device_id via[] = {
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), },
+ { PCI_VDEVICE(VIA, 0x0571), },
+ { PCI_VDEVICE(VIA, 0x0581), },
+ { PCI_VDEVICE(VIA, 0x1571), },
+ { PCI_VDEVICE(VIA, 0x3164), },
+ { PCI_VDEVICE(VIA, 0x5324), },
{ },
};
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 705a020..c957e6e 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -21,6 +21,50 @@
*
*/
+/*
+ sata_mv TODO list:
+
+ 1) Needs a full errata audit for all chipsets. I implemented most
+ of the errata workarounds found in the Marvell vendor driver, but
+ I distinctly remember a couple workarounds (one related to PCI-X)
+ are still needed.
+
+ 2) Convert to LibATA new EH. Required for hotplug, NCQ, and sane
+ probing/error handling in general. MUST HAVE.
+
+ 3) Add hotplug support (easy, once new-EH support appears)
+
+ 4) Add NCQ support (easy to intermediate, once new-EH support appears)
+
+ 5) Investigate problems with PCI Message Signalled Interrupts (MSI).
+
+ 6) Add port multiplier support (intermediate)
+
+ 7) Test and verify 3.0 Gbps support
+
+ 8) Develop a low-power-consumption strategy, and implement it.
+
+ 9) [Experiment, low priority] See if ATAPI can be supported using
+ "unknown FIS" or "vendor-specific FIS" support, or something creative
+ like that.
+
+ 10) [Experiment, low priority] Investigate interrupt coalescing.
+ Quite often, especially with PCI Message Signalled Interrupts (MSI),
+ the overhead reduced by interrupt mitigation is quite often not
+ worth the latency cost.
+
+ 11) [Experiment, Marvell value added] Is it possible to use target
+ mode to cross-connect two Linux boxes with Marvell cards? If so,
+ creating LibATA target mode support would be very interesting.
+
+ Target mode, for those without docs, is the ability to directly
+ connect two SATA controllers.
+
+ 13) Verify that 7042 is fully supported. I only have a 6042.
+
+*/
+
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 3a7d9b5..2b924a6 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -297,7 +297,7 @@ static const struct ata_port_info pdc_port_info[] = {
/* board_2057x_pata */
{
- .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS,
+ .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS |
PDC_FLAG_GEN_II,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 51d9251..221099d 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -255,7 +255,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct
pci_device_id *ent)
{
static int printed_version;
struct ata_port_info pi = sis_port_info;
- const struct ata_port_info *ppi[] = { &pi, NULL };
+ const struct ata_port_info *ppi[] = { &pi, &pi };
struct ata_host *host;
u32 genctl, val;
u8 pmr;
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 01bba26..e8b90e7 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -85,6 +85,9 @@ static const struct pci_device_id svia_pci_tbl[] = {
{ PCI_VDEVICE(VIA, 0x0591), vt6420 },
{ PCI_VDEVICE(VIA, 0x3149), vt6420 },
{ PCI_VDEVICE(VIA, 0x3249), vt6421 },
+ { PCI_VDEVICE(VIA, 0x5287), vt6420 },
+ { PCI_VDEVICE(VIA, 0x5372), vt6420 },
+ { PCI_VDEVICE(VIA, 0x7372), vt6420 },
{ } /* terminate list */
};
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
