ide-generic, add another device exception

This device is char device and is grabbed by generic ide driver:
00:0b.0 Class ffff: National Semiconductor Corporation 87410 IDE (rev ff) 
(prog-if ff)
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-

Disallow generic driver to grab it by adding next condition. Also
consolidate exceptions to one bigger 'switch (dev->vendor)'.

Cc: Ingo Korb <[EMAIL PROTECTED]>
Cc: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>
Signed-off-by: Jiri Slaby <[EMAIL PROTECTED]>

---
commit 879404085754892c27ff2d1c73d310582b872a98
tree abb7f3b7522c4076da230125afa9d34cbf48ff91
parent f6d5d1877b0f7ac82f5e1fec2ead0429eeb069c8
author Jiri Slaby <[EMAIL PROTECTED]> Mon, 04 Jun 2007 11:19:39 +0200
committer Jiri Slaby <[EMAIL PROTECTED]> Mon, 04 Jun 2007 11:19:39 +0200

 drivers/ide/pci/generic.c |   37 +++++++++++++++++++++++--------------
 1 files changed, 23 insertions(+), 14 deletions(-)

diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index f2c5a14..0d51a11 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -198,32 +198,41 @@ static ide_pci_device_t generic_chipsets[] __devinitdata 
= {
 static int __devinit generic_init_one(struct pci_dev *dev, const struct 
pci_device_id *id)
 {
        ide_pci_device_t *d = &generic_chipsets[id->driver_data];
-       u16 command;
        int ret = -ENODEV;
 
        /* Don't use the generic entry unless instructed to do so */
        if (id->driver_data == 0 && ide_generic_all == 0)
                        goto out;
 
-       if (dev->vendor == PCI_VENDOR_ID_UMC &&
-           dev->device == PCI_DEVICE_ID_UMC_UM8886A &&
-           (!(PCI_FUNC(dev->devfn) & 1)))
-               goto out; /* UM8886A/BF pair */
-
-       if (dev->vendor == PCI_VENDOR_ID_OPTI &&
-           dev->device == PCI_DEVICE_ID_OPTI_82C558 &&
-           (!(PCI_FUNC(dev->devfn) & 1)))
-               goto out;
-
-       if (dev->vendor == PCI_VENDOR_ID_JMICRON) {
-               if (dev->device != PCI_DEVICE_ID_JMICRON_JMB368 && 
PCI_FUNC(dev->devfn) != 1)
+       switch (dev->vendor) {
+       case PCI_VENDOR_ID_UMC:
+               if (dev->device == PCI_DEVICE_ID_UMC_UM8886A &&
+                               !(PCI_FUNC(dev->devfn) & 1))
+                       goto out; /* UM8886A/BF pair */
+               break;
+       case PCI_VENDOR_ID_OPTI:
+               if (dev->device == PCI_DEVICE_ID_OPTI_82C558 &&
+                               !(PCI_FUNC(dev->devfn) & 1))
+                       goto out;
+               break;
+       case PCI_VENDOR_ID_JMICRON:
+               if (dev->device != PCI_DEVICE_ID_JMICRON_JMB368 &&
+                               PCI_FUNC(dev->devfn) != 1)
+                       goto out;
+               break;
+       case PCI_VENDOR_ID_NS:
+               if (dev->device == PCI_DEVICE_ID_NS_87410 &&
+                               (dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
                        goto out;
+               break;
        }
 
        if (dev->vendor != PCI_VENDOR_ID_JMICRON) {
+               u16 command;
                pci_read_config_word(dev, PCI_COMMAND, &command);
                if (!(command & PCI_COMMAND_IO)) {
-                       printk(KERN_INFO "Skipping disabled %s IDE 
controller.\n", d->name);
+                       printk(KERN_INFO "Skipping disabled %s IDE "
+                                       "controller.\n", d->name);
                        goto out;
                }
        }
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to