Peter Ganzhorn <[EMAIL PROTECTED]> writes: > Well actually I did not worry about the warning, this particular part > made me worry much more:
This comes with the warning. The warning prints this stack trace. > Call Trace: > [<ffffffff804a99ce>] ata_eh_set_powersave+0x34e/0x370 > [<ffffffff8048c7b0>] scsi_error_handler+0x0/0x330 > [<ffffffff804a9e27>] ata_do_eh+0xb7/0x16f0 > [<ffffffff80229f9d>] find_busiest_group+0x1bd/0x800 > [<ffffffff804aece0>] ahci_postreset+0x0/0x80 > [<ffffffff804ada70>] ahci_hardreset+0x0/0xf0 > [<ffffffff804aee20>] ahci_softreset+0x0/0x270 > [<ffffffff804a40f0>] ata_std_prereset+0x0/0xf0 > [<ffffffff8023b134>] lock_timer_base+0x34/0x70 > [<ffffffff8048c7b0>] scsi_error_handler+0x0/0x330 > [<ffffffff8048c7b0>] scsi_error_handler+0x0/0x330 > [<ffffffff8048c7b0>] scsi_error_handler+0x0/0x330 > [<ffffffff804abc27>] ata_scsi_error+0x297/0x730 > [<ffffffff8048c7b0>] scsi_error_handler+0x0/0x330 > [<ffffffff8048c893>] scsi_error_handler+0xe3/0x330 > [<ffffffff80229507>] __wake_up_common+0x47/0x80 > [<ffffffff8048c7b0>] scsi_error_handler+0x0/0x330 > [<ffffffff8024675b>] kthread+0x4b/0x80 > [<ffffffff8020a9a8>] child_rip+0xa/0x12 > [<ffffffff80246710>] kthread+0x0/0x80 > [<ffffffff8020a99e>] child_rip+0x0/0x12 > > Looks like the kernel complains about a bug or something at this > point?! Because I am not a developer I can't tell for sure, but I > don't think this is all good. > It is printed to dmesg when booting and a second time when enabling > the feature via sysfs. > > Peter > > > John Fremlin wrote: >> Peter Ganzhorn <[EMAIL PROTECTED]> writes: >> >> >>> I just wanted to have a look at the patch and see if it works for >>> me - >>> looks like somethings not all straight, I get this while booting: >>> >>> ahci 0000:00:1f.2: version 2.2 >>> ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 19 (level, low) -> IRQ 19 >>> ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match >>> ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode >>> ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part >>> PCI: Setting latency timer of device 0000:00:1f.2 to 64 >>> scsi0 : ahci >>> ata1: SATA max UDMA/133 cmd 0xffffc20000048100 ctl 0x0000000000000000 >>> bmdma 0x0000000000000000 irq 0 >>> WARNING: at drivers/ata/libata-eh.c:1917 ata_eh_set_powersave() >>> >> >> [...] >> >> >>> I hope this output from dmesg helps to make the patch better - if I >>> can do any further testing please let me know! >>> >> >> That is fine. The warning is expected. There is nothing wrong with >> it. >> >> This patch will stop the ports when they are idle. To turn it on, >> echo 1 > /sys/module/libata/parameters/powersave >> >> [...] >> >> >> - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html