Hello.
Bartlomiej Zolnierkiewicz wrote:
* Add ide_pio_cycle_time() helper.
The side effect is that cycle time "clamping" for the pre ATA-2 drives is
now done for the explicitly specified modes too.
* Use it in ali14xx/ht6560b/qd65xx/cmd64{0,x}/sl82c105 and pmac host drivers
(previously cycle time given by the device was only used for "pio" == 255).
* Remove no longer needed ide_pio_data_t.cycle_time field.
v2:
* Fix "ata_" prefix (Noticed by Jeff).
Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>
Acked-by: Sergei Shtylyov <[EMAIL PROTECTED]>
Index: b/drivers/ide/ide-lib.c
===================================================================
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -249,6 +249,29 @@ static int ide_scan_pio_blacklist (char
return -1;
}
+unsigned int ide_pio_cycle_time(ide_drive_t *drive, u8 pio)
+{
+ struct hd_driveid *id = drive->id;
+ int cycle_time = 0;
+
+ if (id->field_valid & 2) {
+ if (id->capability & 8)
+ cycle_time = id->eide_pio_iordy;
+ else
+ cycle_time = id->eide_pio;
+ }
+
+ /* conservative "downgrade" for all pre-ATA2 drives */
+ if (pio < 3) {
+ if (cycle_time && cycle_time < ide_pio_timings[pio].cycle_time)
Could be collapsed into single if() w/o braces...
+ cycle_time = 0; /* use standard timing */
+ }
+
+ return cycle_time ? cycle_time : ide_pio_timings[pio].cycle_time;
+}
+
+EXPORT_SYMBOL_GPL(ide_pio_cycle_time);
+
/**
* ide_get_best_pio_mode - get PIO mode from drive
* @drive: drive to consider
[...]
Index: b/drivers/ide/pci/sl82c105.c
===================================================================
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -52,13 +52,13 @@
* Convert a PIO mode and cycle time to the required on/off times
* for the interface. This has protection against runaway timings.
*/
-static unsigned int get_pio_timings(ide_drive_t *drive, ide_pio_data_t *p)
+static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
{
unsigned int cmd_on, cmd_off;
u8 iordy = 0;
- cmd_on = (ide_pio_timings[p->pio_mode].active_time + 29) / 30;
- cmd_off = (p->cycle_time - 30 * cmd_on + 29) / 30;
+ cmd_on = (ide_pio_timings[pio].active_time + 29) / 30;
+ cmd_off = (ide_pio_cycle_time(drive, pio) - 30 * cmd_on + 29) / 30;
if (cmd_on == 0)
cmd_on = 1;
@@ -66,7 +66,7 @@ static unsigned int get_pio_timings(ide_
if (cmd_off == 0)
cmd_off = 1;
- if (p->pio_mode > 2 || ide_dev_has_iordy(drive->id))
+ if (pio > 2 || ide_dev_has_iordy(drive->id))
iordy = 0x40;
return (cmd_on - 1) << 8 | (cmd_off - 1) | iordy;
@@ -79,14 +79,13 @@ static u8 sl82c105_tune_pio(ide_drive_t
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
int reg = 0x44 + drive->dn * 4;
- ide_pio_data_t p;
u16 drv_ctrl;
DBG(("sl82c105_tune_pio(drive:%s, pio:%u)\n", drive->name, pio));
- pio = ide_get_best_pio_mode(drive, pio, 5, &p);
+ pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
- drv_ctrl = get_pio_timings(drive, &p);
+ drv_ctrl = get_pio_timings(drive, pio);
/*
* Store the PIO timings so that we can restore them
@@ -105,7 +104,8 @@ static u8 sl82c105_tune_pio(ide_drive_t
}
printk(KERN_DEBUG "%s: selected %s (%dns) (%04X)\n", drive->name,
- ide_xfer_verbose(pio + XFER_PIO_0), p.cycle_time, drv_ctrl);
+ ide_xfer_verbose(pio + XFER_PIO_0),
+ ide_pio_cycle_time(drive, pio), drv_ctrl);
Erm, why not calculate cycle time once and pass it to get_pio_timings()?
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1379,9 +1379,9 @@ typedef struct ide_pio_timings_s {
typedef struct ide_pio_data_s {
u8 pio_mode;
- unsigned int cycle_time;
} ide_pio_data_t;
Might as well have killed the whole structure with this patch...
+unsigned int ide_pio_cycle_time(ide_drive_t *, u8);
extern u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8
max_mode, ide_pio_data_t *d);
extern const ide_pio_timings_t ide_pio_timings[6];
MBR, Sergei
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
