* Rename it8213_tuneproc() to it8213_tune_pio() and add it8213_tuneproc()
  wrapper.  Move finding of the best PIO mode to the new wrapper.

* Add setting of transfer mode on the device to it8213_tuneproc().

* Don't call it8213_dma_2_pio() for PIO modes in it8213_tune_chipset().

* Use it8213_tuneproc() in it8213_config_drive_for_dma().

Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>
---
 drivers/ide/pci/it8213.c |   25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)

Index: b/drivers/ide/pci/it8213.c
===================================================================
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -55,14 +55,14 @@ static u8 it8213_dma_2_pio (u8 xfer_rate
 }
 
 /*
- *     it8213_tuneproc -       tune a drive
+ *     it8213_tune_pio -       tune a drive
  *     @drive: drive to tune
  *     @pio: desired PIO mode
  *
  *     Set the interface PIO mode.
  */
 
-static void it8213_tuneproc (ide_drive_t *drive, u8 pio)
+static void it8213_tune_pio(ide_drive_t *drive, const u8 pio)
 {
        ide_hwif_t *hwif        = HWIF(drive);
        struct pci_dev *dev     = hwif->pci_dev;
@@ -82,8 +82,6 @@ static void it8213_tuneproc (ide_drive_t
                                        { 2, 1 },
                                        { 2, 3 }, };
 
-       pio = ide_get_best_pio_mode(drive, pio, 4);
-
        spin_lock_irqsave(&tune_lock, flags);
        pci_read_config_word(dev, master_port, &master_data);
 
@@ -113,6 +111,13 @@ static void it8213_tuneproc (ide_drive_t
        spin_unlock_irqrestore(&tune_lock, flags);
 }
 
+static void it8213_tuneproc(ide_drive_t *drive, u8 pio)
+{
+       pio = ide_get_best_pio_mode(drive, pio, 4);
+       it8213_tune_pio(drive, pio);
+       ide_config_drive_speed(drive, XFER_PIO_0 + pio);
+}
+
 /**
  *     it8213_tune_chipset     -       set controller timings
  *     @drive: Drive to set up
@@ -193,7 +198,12 @@ static int it8213_tune_chipset (ide_driv
                if (reg55 & w_flag)
                        pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
        }
-       it8213_tuneproc(drive, it8213_dma_2_pio(speed));
+
+       if (speed > XFER_PIO_4)
+               it8213_tune_pio(drive, it8213_dma_2_pio(speed));
+       else
+               it8213_tune_pio(drive, speed - XFER_PIO_0);
+
        return ide_config_drive_speed(drive, speed);
 }
 
@@ -209,13 +219,10 @@ static int it8213_tune_chipset (ide_driv
 
 static int it8213_config_drive_for_dma (ide_drive_t *drive)
 {
-       u8 pio;
-
        if (ide_tune_dma(drive))
                return 0;
 
-       pio = ide_get_best_pio_mode(drive, 255, 4);
-       it8213_tune_chipset(drive, XFER_PIO_0 + pio);
+       it8213_tuneproc(drive, 255);
 
        return -1;
 }
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to