On Saturday 14 July 2007, Sergei Shtylyov wrote: > Bartlomiej Zolnierkiewicz wrote: > > > [PATCH] icside: fix ->speedproc to return on unsupported modes (take 3) > > > * All other implementations of ->speedproc return zero on success > > and non-zero on failure. Currently it doesn't matter for icside host > > driver and isn't a bug per se since: > > > - ide_set_xfer_rate() return value is ignored by all IDE core users > > > - icside doesn't (yet!) use ide_tune_dma() in icside_dma_check() > > > but sooner or later we will need to fix anyway - so lets do it now. > > > * icside_set_speed() happily accepts unsupported transfer modes which > > results in drive->drive_data being set to the maximum value (480) > > and drive->current_speed being set to the unsupported transfer mode. > > > Fix it. > > > v2: > > * The initial version of the patch was broken because it didn't take into > > the account (the different from usual) return values of icside_set_speed() > > (Noticed by Russell). > > > v3: > > * Remove no longer needed initialization/checking of cycle_time > > (Noticed by Sergei). > > > * No need to set drive->drive_data if DMA is not going to be used > > (Noticed by Sergei). > > > * Remove incorrect setting of drive->current_speed > > (Noticed by Sergei). > > > * Move ide_config_drive_speed() at the end of icside_set_speed(). > > > Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]> > > Acked-by: Sergei Shtylyov <[EMAIL PROTECTED]>
added Russell, are you OK with this revision? Thanks, Bart - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
