Hello.
Bartlomiej Zolnierkiewicz wrote:
On Fri, 27 Jul 2007 02:22:27 +0200
Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]> wrote:
* Convert {ide_hwif_t,ide_pci_device_t}->host_flag to be u16.
* Add IDE_HFLAG_POST_SET_MODE host to indicate the need to program the
host for the transfer mode after programming the device. Set it in
au1xxx-ide/cs5530/cs5535/pdc202xx_new/sc1200/via82cxxx host drivers.
The CS5530 at least shouldn't care what order changes are done. I don't
And neither CS5535. And Au1200 static bus controller shouldn't care about
the order too, so au1xxx-ide hardly needs that.
Here's the datasheet, BTW:
http://www.razamicroelectronics.com/documents/32798e_Au1200_db.pdf
think the SC1200 does either but I don't have the docs to hand.
It seems pretty much alike CS553x except it's accessed via PCI config.
space, not MSRs... Here's the datasheet:
http://www.amd.com/files/connectivitysolutions/geode/32579B_sc1200_ds.pdf
I have a feeling that only pdc202xx_new and jmicron drivers actually need
this flag (and the latter one actually doesn't care as its methods are empty
anyway). Well, AMD/VIA chips enable UltraDMA mode by snooping Set Features
command (as the drivers tell them to do so), so the order seems important
unless that is changed.
Thanks,
Bart
MBR, Sergei
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html