On Fri, 03 Aug 2007 12:00:57 -0600 Robert Hancock <[EMAIL PROTECTED]> wrote:
> This adds human-readable decoding of the ATA status and error registers > (similar to what drivers/ide does) as well as the SATA Serror register to > libata error handling output. This prevents the need to pore through > standards documents to figure out the meaning of the bits in these > registers when looking at error reports. Some bits that drivers/ide > decoded are not decoded here, since the bits are either command-dependent > or obsolete, and properly parsing them would add too much complexity. Not sure its really worth it. Does "ABRT IDNF" actually tell you any more than the hex code ? In fact I find the hex code clearer because its usually the combination of state (0x51) etc that tells the story. No objection to it going in and on a correctness basis Acked-by: Alan Cox <[EMAIL PROTECTED]> - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
