On Fri, 3 Aug 2007 20:28:39 +0200 (MEST) Mikael Pettersson <[EMAIL PROTECTED]> wrote:
> The machine is an Athlon64 laptop with a K8T800 chipset. With the IDE > VIA driver the disk is detected as udma/100: Currently old IDE via driver has a hack in it which goes 'did the BIOS set UDMA3+' then I guess the cable is 80 wire regardless. libata doesn't do that as it breaks with hotplug, breaks with suspend/resume before the driver is loaded and other bits. Instead we have two things - an ACPI snoop and a table of wonky laptops (eg those that use 40 wire ultrashort cables which are valid for UDMA133 but not detected as 80 wire). If your laptop is done that way then it just needs adding to the magic list and/or 2.6.23-rc1-mm should spot it by ACPI. I'd prefer the table entry anyway as I don't like relying on ACPI so an lspci -vvxx would be appreciated - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
