Kristen Carlson Accardi wrote:
Check to see if an ATAPI device supports Asynchronous Notification.
If so, enable it.
Signed-off-by: Kristen Carlson Accardi <[EMAIL PROTECTED]>
Index: 2.6-git/drivers/ata/libata-core.c
===================================================================
--- 2.6-git.orig/drivers/ata/libata-core.c
+++ 2.6-git/drivers/ata/libata-core.c
@@ -70,6 +70,7 @@ const unsigned long sata_deb_timing_long
static unsigned int ata_dev_init_params(struct ata_device *dev,
u16 heads, u16 sectors);
static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
+static unsigned int ata_dev_set_AN(struct ata_device *dev, u8 enable);
static void ata_dev_xfermask(struct ata_device *dev);
static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
@@ -1974,6 +1975,22 @@ int ata_dev_configure(struct ata_device
}
dev->cdb_len = (unsigned int) rc;
+ /*
+ * check to see if this ATAPI device supports
+ * Asynchronous Notification
+ */
+ if ((ap->flags & ATA_FLAG_AN) && ata_id_has_AN(id)) {
+ int err;
+ /* issue SET feature command to turn this on */
+ err = ata_dev_set_AN(dev, SETFEATURES_SATA_ENABLE);
+ if (err)
+ ata_dev_printk(dev, KERN_ERR,
+ "unable to set AN, err %x\n",
+ err);
+ else
+ dev->flags |= ATA_DFLAG_AN;
+ }
+
if (ata_id_cdb_intr(dev->id)) {
dev->flags |= ATA_DFLAG_CDB_INTR;
cdb_intr_string = ", CDB intr";
@@ -3948,6 +3965,42 @@ static unsigned int ata_dev_set_xfermode
}
/**
+ * ata_dev_set_AN - Issue SET FEATURES - SATA FEATURES
+ * @dev: Device to which command will be sent
+ * @enable: Whether to enable or disable the feature
+ *
+ * Issue SET FEATURES - SATA FEATURES command to device @dev
+ * on port @ap with sector count set to indicate Asynchronous
+ * Notification feature
+ *
+ * LOCKING:
+ * PCI/etc. bus probe sem.
+ *
+ * RETURNS:
+ * 0 on success, AC_ERR_* mask otherwise.
+ */
+static unsigned int ata_dev_set_AN(struct ata_device *dev, u8 enable)
+{
+ struct ata_taskfile tf;
+ unsigned int err_mask;
+
+ /* set up set-features taskfile */
+ DPRINTK("set features - SATA features\n");
+
+ ata_tf_init(dev, &tf);
+ tf.command = ATA_CMD_SET_FEATURES;
+ tf.feature = enable;
+ tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ tf.protocol = ATA_PROT_NODATA;
+ tf.nsect = SATA_AN;
+
+ err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
+
+ DPRINTK("EXIT, err_mask=%x\n", err_mask);
+ return err_mask;
+}
+
+/**
* ata_dev_init_params - Issue INIT DEV PARAMS command
* @dev: Device to which command will be sent
* @heads: Number of heads (taskfile parameter)
Index: 2.6-git/include/linux/ata.h
===================================================================
--- 2.6-git.orig/include/linux/ata.h
+++ 2.6-git/include/linux/ata.h
@@ -217,6 +217,12 @@ enum {
SETFEATURES_SPINUP = 0x07, /* Spin-up drive */
+ SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */
+ SETFEATURES_SATA_DISABLE = 0x90, /* Disable use of SATA feature */
+
+ /* SETFEATURE Sector counts for SATA features */
+ SATA_AN = 0x05, /* Asynchronous Notification */
+
/* ATAPI stuff */
ATAPI_PKT_DMA = (1 << 0),
ATAPI_DMADIR = (1 << 2), /* ATAPI data dir:
@@ -344,6 +350,9 @@ struct ata_taskfile {
#define ata_id_queue_depth(id) (((id)[75] & 0x1f) + 1)
#define ata_id_removeable(id) ((id)[0] & (1 << 7))
#define ata_id_has_dword_io(id) ((id)[50] & (1 << 0))
+#define ata_id_has_AN(id) \
+ ( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
+ ((id)[78] & (1 << 5)) )
#define ata_id_iordy_disable(id) ((id)[49] & (1 << 10))
#define ata_id_has_iordy(id) ((id)[49] & (1 << 9))
#define ata_id_u32(id,n) \
Index: 2.6-git/include/linux/libata.h
===================================================================
--- 2.6-git.orig/include/linux/libata.h
+++ 2.6-git/include/linux/libata.h
@@ -139,7 +139,8 @@ enum {
ATA_DFLAG_FLUSH_EXT = (1 << 4), /* do FLUSH_EXT instead of FLUSH */
ATA_DFLAG_ACPI_PENDING = (1 << 5), /* ACPI resume action pending */
ATA_DFLAG_ACPI_FAILED = (1 << 6), /* ACPI on devcfg has failed */
- ATA_DFLAG_CFG_MASK = (1 << 8) - 1,
+ ATA_DFLAG_AN = (1 << 7), /* device supports AN */
+ ATA_DFLAG_CFG_MASK = (1 << 12) - 1,
ATA_DFLAG_PIO = (1 << 8), /* device limited to PIO mode */
ATA_DFLAG_NCQ_OFF = (1 << 9), /* device limited to non-NCQ mode */
@@ -177,6 +178,7 @@ enum {
ATA_FLAG_IGN_SIMPLEX = (1 << 15), /* ignore SIMPLEX */
ATA_FLAG_NO_IORDY = (1 << 16), /* controller lacks iordy */
ATA_FLAG_ACPI_SATA = (1 << 17), /* need native SATA ACPI layout */
+ ATA_FLAG_AN = (1 << 18), /* controller supports AN */
I applied the above changes, in order to move AN forward
/* The following flag belongs to ap->pflags but is kept in
* ap->flags because it's referenced in many LLDs and will be
Index: 2.6-git/drivers/ata/ahci.c
===================================================================
--- 2.6-git.orig/drivers/ata/ahci.c
+++ 2.6-git/drivers/ata/ahci.c
@@ -332,14 +332,15 @@ static const struct ata_port_operations
static const struct ata_port_info ahci_port_info[] = {
/* board_ahci */
{
- .flags = AHCI_FLAG_COMMON,
+ .flags = AHCI_FLAG_COMMON | ATA_FLAG_AN,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
/* board_ahci_pi */
{
- .flags = AHCI_FLAG_COMMON | AHCI_FLAG_HONOR_PI,
+ .flags = AHCI_FLAG_COMMON | AHCI_FLAG_HONOR_PI |
+ ATA_FLAG_AN,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
Since I wanted to get in Tejun's ata_link changes before this, this will
require a rediff.
But more importantly, as I was going to apply it I noticed another
problem: we need to verify that SiS and NVIDIA both support AN support
turning this on, since this patch affects not only Intel but also those
vendors' AHCI hardware as well.
It's a bit annoying but this is a cross-vendor driver after all...
Jeff
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html