* Make ide_pci_device_t.host_flags u32 and add IDE_HFLAG_CS5520 host flag.
* Pass ide_pci_device_t *d to setup-pci.c::ide_get_or_set_dma_base()
and use d->name instead of hwif->cds->name.
* Set IDE_HFLAG_CS5520 host flag in cs5520 host driver and use it in
ide_get_or_set_dma_base() to find out which PCI BAR to use, remove no longer
needed cs5520.c::cs5520_init_setup_dma() and ide_pci_device_t.init_setup_dma.
This fixes PCI bus-mastering and DMA simplex mode not being checked for
CS5510/CS5520 hosts.
Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>
---
drivers/ide/pci/cs5520.c | 14 +-------------
drivers/ide/setup-pci.c | 33 +++++++++++++++------------------
include/linux/ide.h | 5 +++--
3 files changed, 19 insertions(+), 33 deletions(-)
Index: b/drivers/ide/pci/cs5520.c
===================================================================
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -106,18 +106,6 @@ static void cs5520_set_dma_mode(ide_driv
}
/*
- * We provide a callback for our nonstandard DMA location
- */
-
-static void __devinit cs5520_init_setup_dma(struct pci_dev *dev,
ide_pci_device_t *d, ide_hwif_t *hwif)
-{
- unsigned long bmide = pci_resource_start(dev, 2); /* Not the
usual 4 */
- if(hwif->mate && hwif->mate->dma_base) /* Second channel at primary +
8 */
- bmide += 8;
- ide_setup_dma(hwif, bmide, 8);
-}
-
-/*
* We wrap the DMA activate to set the vdma flag. This is needed
* so that the IDE DMA layer issues PIO not DMA commands over the
* DMA channel
@@ -150,9 +138,9 @@ static void __devinit init_hwif_cs5520(i
#define DECLARE_CS_DEV(name_str) \
{ \
.name = name_str, \
- .init_setup_dma = cs5520_init_setup_dma, \
.init_hwif = init_hwif_cs5520, \
.host_flags = IDE_HFLAG_ISA_PORTS | \
+ IDE_HFLAG_CS5520 | \
IDE_HFLAG_VDMA | \
IDE_HFLAG_NO_ATAPI_DMA | \
IDE_HFLAG_BOOTABLE, \
Index: b/drivers/ide/setup-pci.c
===================================================================
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -147,6 +147,7 @@ static int ide_setup_pci_baseregs (struc
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
/**
* ide_get_or_set_dma_base - setup BMIBA
+ * @d: IDE pci device data
* @hwif: Interface
*
* Fetch the DMA Bus-Master-I/O-Base-Address (BMIBA) from PCI space.
@@ -154,7 +155,7 @@ static int ide_setup_pci_baseregs (struc
* and enforce IDE simplex rules.
*/
-static unsigned long ide_get_or_set_dma_base (ide_hwif_t *hwif)
+static unsigned long ide_get_or_set_dma_base(ide_pci_device_t *d, ide_hwif_t
*hwif)
{
unsigned long dma_base = 0;
struct pci_dev *dev = hwif->pci_dev;
@@ -165,11 +166,12 @@ static unsigned long ide_get_or_set_dma_
if (hwif->mate && hwif->mate->dma_base) {
dma_base = hwif->mate->dma_base - (hwif->channel ? 0 : 8);
} else {
- dma_base = pci_resource_start(dev, 4);
- if (!dma_base) {
- printk(KERN_ERR "%s: dma_base is invalid\n",
- hwif->cds->name);
- }
+ u8 baridx = (d->host_flags & IDE_HFLAG_CS5520) ? 2 : 4;
+
+ dma_base = pci_resource_start(dev, baridx);
+
+ if (dma_base == 0)
+ printk(KERN_ERR "%s: DMA base is invalid\n", d->name);
}
if (dma_base) {
@@ -188,8 +190,8 @@ static unsigned long ide_get_or_set_dma_
simplex_stat = hwif->INB(dma_base + 2);
if (simplex_stat & 0x80) {
printk(KERN_INFO "%s: simplex device: "
- "DMA forced\n",
- hwif->cds->name);
+ "DMA forced\n",
+ d->name);
}
break;
default:
@@ -212,8 +214,8 @@ static unsigned long ide_get_or_set_dma_
*/
if (hwif->mate && hwif->mate->dma_base)
{
printk(KERN_INFO "%s: simplex
device: "
- "DMA disabled\n",
- hwif->cds->name);
+ "DMA
disabled\n",
+ d->name);
dma_base = 0;
}
}
@@ -434,7 +436,7 @@ static void ide_hwif_setup_dma(struct pc
if ((d->host_flags & IDE_HFLAG_NO_AUTODMA) == 0 ||
((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
(dev->class & 0x80))) {
- unsigned long dma_base = ide_get_or_set_dma_base(hwif);
+ unsigned long dma_base = ide_get_or_set_dma_base(d, hwif);
if (dma_base && !(pcicmd & PCI_COMMAND_MASTER)) {
/*
* Set up BM-DMA capability
@@ -559,14 +561,9 @@ void ide_pci_setup_ports(struct pci_dev
if (d->init_iops)
d->init_iops(hwif);
- if (d->host_flags & IDE_HFLAG_NO_DMA)
- goto bypass_legacy_dma;
-
- if(d->init_setup_dma)
- d->init_setup_dma(dev, d, hwif);
- else
+ if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0)
ide_hwif_setup_dma(dev, d, hwif);
-bypass_legacy_dma:
+
hwif->host_flags = d->host_flags;
hwif->pio_mask = d->pio_mask;
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1257,6 +1257,8 @@ enum {
IDE_HFLAG_NO_DMA = (1 << 14),
/* check if host is PCI IDE device before allowing DMA */
IDE_HFLAG_NO_AUTODMA = (1 << 15),
+ /* host is CS5510/CS5520 */
+ IDE_HFLAG_CS5520 = (1 << 16),
};
#ifdef CONFIG_BLK_DEV_OFFBOARD
@@ -1268,7 +1270,6 @@ enum {
typedef struct ide_pci_device_s {
char *name;
int (*init_setup)(struct pci_dev *, struct
ide_pci_device_s *);
- void (*init_setup_dma)(struct pci_dev *, struct
ide_pci_device_s *, ide_hwif_t *);
unsigned int (*init_chipset)(struct pci_dev *, const char *);
void (*init_iops)(ide_hwif_t *);
void (*init_hwif)(ide_hwif_t *);
@@ -1277,7 +1278,7 @@ typedef struct ide_pci_device_s {
ide_pci_enablebit_t enablebits[2];
unsigned int extra;
struct ide_pci_device_s *next;
- u16 host_flags;
+ u32 host_flags;
u8 pio_mask;
u8 udma_mask;
} ide_pci_device_t;
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
