Local variable @action usage in ata_eh_reset() is a bit confusing.
It's used only to cache ehc->i.action to test reset masks after
clearing it; however, due to the generic name "action", it's easy to
misinterpret the local variable as containing the selected reset
method later. Also, the reason for caching the original value is easy
to miss.
This patch renames @action to @tmp_action and make it buffer newly
selected value instead to improve readability.
Signed-off-by: Tejun Heo <[EMAIL PROTECTED]>
---
drivers/ata/libata-eh.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 93e2b54..8cb35bb 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2071,7 +2071,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
int try = 0;
struct ata_device *dev;
unsigned long deadline;
- unsigned int action;
+ unsigned int tmp_action;
ata_reset_fn_t reset;
unsigned long flags;
int rc;
@@ -2086,14 +2086,14 @@ int ata_eh_reset(struct ata_link *link, int classify,
/* Determine which reset to use and record in ehc->i.action.
* prereset() may examine and modify it.
*/
- action = ehc->i.action;
- ehc->i.action &= ~ATA_EH_RESET_MASK;
if (softreset && (!hardreset || (!(link->flags & ATA_LFLAG_NO_SRST) &&
!sata_set_spd_needed(link) &&
- !(action & ATA_EH_HARDRESET))))
- ehc->i.action |= ATA_EH_SOFTRESET;
+ !(ehc->i.action & ATA_EH_HARDRESET))))
+ tmp_action = ATA_EH_SOFTRESET;
else
- ehc->i.action |= ATA_EH_HARDRESET;
+ tmp_action = ATA_EH_HARDRESET;
+
+ ehc->i.action = (ehc->i.action & ~ATA_EH_RESET_MASK) | tmp_action;
if (prereset) {
rc = prereset(link, jiffies + ATA_EH_PRERESET_TIMEOUT);
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
