On Fri, 16 Nov 2007 19:45:54 +0300 Sergei Shtylyov <[EMAIL PROTECTED]> wrote:
> Alan Cox wrote: > > >>Fix handling of the PIO modes for the pre-EIDE drives that did not support > >>the PIO Flow Control Transfer Mode value (00001 nnn) of the Set Transfer > >>Mode > >>feature by skipping the actual mode programming. > > > You also need to cater for CF 1.1 compliant devices which do not have set > > xfer mode. > > Do they have IORDY support? Good question. CF 1.4 says set features supports 01/0A/55/66/81/8A/9A/BB/CC (with 69/96/97 NOP or not recommended) However it documents both the PIO mode and DMA word in identify. I've never seen a CF 1.x card which does DMA or PIO > 2. CF 1.x is sort of ATA-2 ish but without some set features (eg its got idle immediate) and with some stuff that became general later (security features) Alan - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
