Reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask() and
while at it relocate the function below ata_acpi_gtm_xfermask().
New ata_acpi_cbl_80wire() implementation takes @gtm, in both pata_via
and pata_amd, use the initial GTM value. Both are trying to peek
initial BIOS configuration, so using initial caching value makes
sense. This fixes ACPI part of cable detection in pata_amd which
previously always returned 0 because configuring PIO0 during reset
clears DMA configuration.
Signed-off-by: Tejun Heo <[EMAIL PROTECTED]>
Cc: Alan Cox <[EMAIL PROTECTED]>
---
drivers/ata/libata-acpi.c | 66 +++++++++++++++++++--------------------------
drivers/ata/pata_amd.c | 3 +-
drivers/ata/pata_via.c | 3 +-
include/linux/libata.h | 10 +++++--
4 files changed, 39 insertions(+), 43 deletions(-)
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 357f9a2..5ef2841 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -387,44 +387,6 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct
ata_acpi_gtf **gtf,
}
/**
- * ata_acpi_cbl_80wire - Check for 80 wire cable
- * @ap: Port to check
- *
- * Return 1 if the ACPI mode data for this port indicates the BIOS selected
- * an 80wire mode.
- */
-
-int ata_acpi_cbl_80wire(struct ata_port *ap)
-{
- struct ata_acpi_gtm gtm;
- int valid = 0;
-
- /* No _GTM data, no information */
- if (ata_acpi_gtm(ap, >m) < 0)
- return 0;
-
- /* Split timing, DMA enabled */
- if ((gtm.flags & 0x11) == 0x11 && gtm.drive[0].dma < 55)
- valid |= 1;
- if ((gtm.flags & 0x14) == 0x14 && gtm.drive[1].dma < 55)
- valid |= 2;
- /* Shared timing, DMA enabled */
- if ((gtm.flags & 0x11) == 0x01 && gtm.drive[0].dma < 55)
- valid |= 1;
- if ((gtm.flags & 0x14) == 0x04 && gtm.drive[0].dma < 55)
- valid |= 2;
-
- /* Drive check */
- if ((valid & 1) && ata_dev_enabled(&ap->link.device[0]))
- return 1;
- if ((valid & 2) && ata_dev_enabled(&ap->link.device[1]))
- return 1;
- return 0;
-}
-
-EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire);
-
-/**
* ata_acpi_gtm_xfermode - determine xfermode from GTM parameter
* @dev: target device
* @gtm: GTM parameter to use
@@ -471,6 +433,34 @@ unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev,
EXPORT_SYMBOL_GPL(ata_acpi_gtm_xfermask);
/**
+ * ata_acpi_cbl_80wire - Check for 80 wire cable
+ * @ap: Port to check
+ * @gtm: GTM data to use
+ *
+ * Return 1 if the @gtm indicates the BIOS selected an 80wire mode.
+ */
+int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm)
+{
+ struct ata_device *dev;
+
+ ata_link_for_each_dev(dev, &ap->link) {
+ unsigned long xfer_mask, udma_mask;
+
+ if (!ata_dev_enabled(dev))
+ continue;
+
+ xfer_mask = ata_acpi_gtm_xfermask(dev, gtm);
+ ata_unpack_xfermask(xfer_mask, NULL, NULL, &udma_mask);
+
+ if (udma_mask & ~ATA_UDMA_MASK_40C)
+ return 1;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire);
+
+/**
* taskfile_load_raw - send taskfile registers to host controller
* @dev: target ATA device
* @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7)
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index c5779ad..f65fa6c 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -271,7 +271,8 @@ static int nv_cable_detect(struct ata_port *ap)
if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400)
cbl = ATA_CBL_PATA80;
/* And a triple check across suspend/resume with ACPI around */
- if (ata_acpi_cbl_80wire(ap))
+ if (ata_acpi_init_gtm(ap) &&
+ ata_acpi_cbl_80wire(ap, ata_acpi_init_gtm(ap)))
cbl = ATA_CBL_PATA80;
return cbl;
}
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index a4175fb..3f28ed4 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -185,7 +185,8 @@ static int via_cable_detect(struct ata_port *ap) {
if (ata66 & (0x10100000 >> (16 * ap->port_no)))
return ATA_CBL_PATA80;
/* Check with ACPI so we can spot BIOS reported SATA bridges */
- if (ata_acpi_cbl_80wire(ap))
+ if (ata_acpi_init_gtm(ap) &&
+ ata_acpi_cbl_80wire(ap, ata_acpi_init_gtm(ap)))
return ATA_CBL_PATA80;
return ATA_CBL_PATA40;
}
diff --git a/include/linux/libata.h b/include/linux/libata.h
index f056b2c..7375341 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -966,19 +966,17 @@ static inline const struct ata_acpi_gtm
*ata_acpi_init_gtm(struct ata_port *ap)
return &ap->__acpi_init_gtm;
return NULL;
}
-extern int ata_acpi_cbl_80wire(struct ata_port *ap);
int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm);
int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *stm);
unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev,
const struct ata_acpi_gtm *gtm);
+int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm);
#else
static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
{
return NULL;
}
-static inline int ata_acpi_cbl_80wire(struct ata_port *ap) { return 0; }
-
static inline int ata_acpi_stm(const struct ata_port *ap,
struct ata_acpi_gtm *stm)
{
@@ -996,6 +994,12 @@ static inline unsigned int ata_acpi_gtm_xfermask(struct
ata_device *dev,
{
return 0;
}
+
+static inline int ata_acpi_cbl_80wire(struct ata_port *ap,
+ const struct ata_acpi_gtm *gtm)
+{
+ return 0;
+}
#endif
#ifdef CONFIG_PCI
--
1.5.2.4
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
