Based on the earlier work by Tejun Heo.

All users are gone so we can finally remove it.

Cc: Tejun Heo <[EMAIL PROTECTED]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>
---
 drivers/ide/ide-io.c   |   98 ++-----------------------------------------------
 drivers/ide/ide-lib.c  |   25 +++---------
 include/linux/blkdev.h |    1 
 3 files changed, 11 insertions(+), 113 deletions(-)

Index: b/drivers/ide/ide-io.c
===================================================================
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -354,7 +354,6 @@ void ide_tf_read(ide_drive_t *drive, ide
  
 void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
 {
-       ide_hwif_t *hwif = HWIF(drive);
        unsigned long flags;
        struct request *rq;
 
@@ -362,19 +361,7 @@ void ide_end_drive_cmd (ide_drive_t *dri
        rq = HWGROUP(drive)->rq;
        spin_unlock_irqrestore(&ide_lock, flags);
 
-       if (rq->cmd_type == REQ_TYPE_ATA_CMD) {
-               u8 *args = (u8 *) rq->buffer;
-               if (rq->errors == 0)
-                       rq->errors = !OK_STAT(stat,READY_STAT,BAD_STAT);
-
-               if (args) {
-                       args[0] = stat;
-                       args[1] = err;
-                       /* be sure we're looking at the low order bits */
-                       hwif->OUTB(drive->ctl & ~0x80, IDE_CONTROL_REG);
-                       args[2] = hwif->INB(IDE_NSECTOR_REG);
-               }
-       } else if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
+       if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
                ide_task_t *args = (ide_task_t *) rq->special;
                if (rq->errors == 0)
                        rq->errors = !OK_STAT(stat,READY_STAT,BAD_STAT);
@@ -624,48 +611,6 @@ ide_startstop_t ide_abort(ide_drive_t *d
                return __ide_abort(drive, rq);
 }
 
-/**
- *     drive_cmd_intr          -       drive command completion interrupt
- *     @drive: drive the completion interrupt occurred on
- *
- *     drive_cmd_intr() is invoked on completion of a special DRIVE_CMD.
- *     We do any necessary data reading and then wait for the drive to
- *     go non busy. At that point we may read the error data and complete
- *     the request
- */
- 
-static ide_startstop_t drive_cmd_intr (ide_drive_t *drive)
-{
-       struct request *rq = HWGROUP(drive)->rq;
-       ide_hwif_t *hwif = HWIF(drive);
-       u8 *args = (u8 *)rq->buffer, pio_in = (args && args[3]) ? 1 : 0, stat;
-
-       if (pio_in) {
-               u8 io_32bit = drive->io_32bit;
-               stat = hwif->INB(IDE_STATUS_REG);
-               if (!OK_STAT(stat, DRQ_STAT, BAD_R_STAT)) {
-                       if (stat & (ERR_STAT | DRQ_STAT))
-                               return ide_error(drive, __FUNCTION__, stat);
-                       ide_set_handler(drive, &drive_cmd_intr, WAIT_WORSTCASE,
-                                       NULL);
-                       return ide_started;
-               }
-               drive->io_32bit = 0;
-               hwif->ata_input_data(drive, &args[4], args[3] * SECTOR_WORDS);
-               drive->io_32bit = io_32bit;
-               stat = wait_drive_not_busy(drive);
-       } else {
-               local_irq_enable_in_hardirq();
-               stat = hwif->INB(IDE_STATUS_REG);
-       }
-
-       if (!OK_STAT(stat, (pio_in ? 0 : READY_STAT), BAD_STAT))
-               return ide_error(drive, __FUNCTION__, stat);
-               /* calls ide_end_drive_cmd */
-       ide_end_drive_cmd(drive, stat, hwif->INB(IDE_ERROR_REG));
-       return ide_stopped;
-}
-
 static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
 {
        tf->nsect   = drive->sect;
@@ -851,16 +796,9 @@ static ide_startstop_t execute_drive_cmd
                struct request *rq)
 {
        ide_hwif_t *hwif = HWIF(drive);
-       u8 *args = rq->buffer;
-       ide_task_t ltask;
-       struct ide_taskfile *tf = &ltask.tf;
-
-       if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
-               ide_task_t *task = rq->special;
- 
-               if (task == NULL)
-                       goto done;
+       ide_task_t *task = rq->special;
 
+       if (task) {
                hwif->data_phase = task->data_phase;
 
                switch (hwif->data_phase) {
@@ -877,33 +815,6 @@ static ide_startstop_t execute_drive_cmd
                return do_rw_taskfile(drive, task);
        }
 
-       if (args == NULL)
-               goto done;
-
-       memset(&ltask, 0, sizeof(ltask));
-       if (rq->cmd_type == REQ_TYPE_ATA_CMD) {
-#ifdef DEBUG
-               printk("%s: DRIVE_CMD\n", drive->name);
-#endif
-               tf->feature = args[2];
-               if (args[0] == WIN_SMART) {
-                       tf->nsect = args[3];
-                       tf->lbal  = args[1];
-                       tf->lbam  = 0x4f;
-                       tf->lbah  = 0xc2;
-                       ltask.tf_flags = IDE_TFLAG_OUT_TF;
-               } else {
-                       tf->nsect = args[1];
-                       ltask.tf_flags = IDE_TFLAG_OUT_FEATURE |
-                                        IDE_TFLAG_OUT_NSECT;
-               }
-       }
-       tf->command = args[0];
-       ide_tf_load(drive, &ltask);
-       ide_execute_command(drive, args[0], &drive_cmd_intr, WAIT_WORSTCASE, 
NULL);
-       return ide_started;
-
-done:
        /*
         * NULL is actually a valid way of waiting for
         * all current requests to be flushed from the queue.
@@ -1006,8 +917,7 @@ static ide_startstop_t start_request (id
                if (drive->current_speed == 0xff)
                        ide_config_drive_speed(drive, drive->desired_speed);
 
-               if (rq->cmd_type == REQ_TYPE_ATA_CMD ||
-                   rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
+               if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
                        return execute_drive_cmd(drive, rq);
                else if (blk_pm_request(rq)) {
                        struct request_pm_state *pm = rq->data;
Index: b/drivers/ide/ide-lib.c
===================================================================
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -454,8 +454,7 @@ int ide_set_xfer_rate(ide_drive_t *drive
 static void ide_dump_opcode(ide_drive_t *drive)
 {
        struct request *rq;
-       u8 opcode = 0;
-       int found = 0;
+       ide_task_t *task = NULL;
 
        spin_lock(&ide_lock);
        rq = NULL;
@@ -464,25 +463,15 @@ static void ide_dump_opcode(ide_drive_t 
        spin_unlock(&ide_lock);
        if (!rq)
                return;
-       if (rq->cmd_type == REQ_TYPE_ATA_CMD) {
-               char *args = rq->buffer;
-               if (args) {
-                       opcode = args[0];
-                       found = 1;
-               }
-       } else if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
-               ide_task_t *args = rq->special;
-               if (args) {
-                       opcode = args->tf.command;
-                       found = 1;
-               }
-       }
+
+       if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
+               task = rq->special;
 
        printk("ide: failed opcode was: ");
-       if (!found)
-               printk("unknown\n");
+       if (task == NULL)
+               printk(KERN_CONT "unknown\n");
        else
-               printk("0x%02x\n", opcode);
+               printk(KERN_CONT "0x%02x\n", task->tf.command);
 }
 
 u64 ide_get_lba_addr(struct ide_taskfile *tf, int lba48)
Index: b/include/linux/blkdev.h
===================================================================
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -143,7 +143,6 @@ enum rq_cmd_type_bits {
         * use REQ_TYPE_SPECIAL and use rq->cmd[0] with the range of driver
         * private REQ_LB opcodes to differentiate what type of request this is
         */
-       REQ_TYPE_ATA_CMD,
        REQ_TYPE_ATA_TASKFILE,
        REQ_TYPE_ATA_PC,
 };
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to