Hi,
Just FYI I've tried to enable ADMA again (now running 2.6.24-rc6) but
the bug is still present:
Jan 1 16:11:21 host kernel: ata7: EH in ADMA mode, notifier 0x0 notifier_error
0x0 gen_ctl 0x1501000 status 0x400 next cpb count 0x0 next cpb idx 0x0
Jan 1 16:11:21 host kernel: ata7: CPB 0: ctl_flags 0x9, resp_flags 0x0
Jan 1 16:11:21 host kernel: ata7: timeout waiting for ADMA IDLE, stat=0x400
Jan 1 16:11:21 host kernel: ata7: timeout waiting for ADMA LEGACY, stat=0x400
Jan 1 16:11:21 host kernel: ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0
action 0x2 frozen
Jan 1 16:11:21 host kernel: ata7.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0
tag 0
Jan 1 16:11:21 host kernel: res 40/00:00:00:4f:c2/00:00:00:00:00/00
Emask 0x4 (timeout)
Jan 1 16:11:21 host kernel: ata7.00: status: { DRDY }
Jan 1 16:11:21 host kernel: ata7: soft resetting link
Jan 1 16:11:22 host kernel: ata7: SATA link up 3.0 Gbps (SStatus 123 SControl
300)
Jan 1 16:11:22 host kernel: ata7.00: configured for UDMA/133
Jan 1 16:11:22 host kernel: ata7: EH complete
Jan 1 16:11:22 host kernel: sd 6:0:0:0: [sdc] 488397168 512-byte hardware
sectors (250059 MB)
Jan 1 16:11:22 host kernel: sd 6:0:0:0: [sdc] Write Protect is off
Jan 1 16:11:22 host kernel: sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Jan 1 16:11:22 host kernel: sd 6:0:0:0: [sdc] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Although this time the above happened more than 3 hours after boot
which is much better than 2.6.22 was. In the past ~4 months ADMA was
disabled and I never had any libata-related error messages.
SMART does not show anything interesting:
smartctl version 5.37 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce
Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint P120 series
Device Model: SAMSUNG SP2504C
Serial Number: XXXXXXXXXXXXXX
Firmware Version: VT100-33
User Capacity: 250,059,350,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a
Local Time is: Tue Jan 1 17:38:21 2008 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (4867) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 81) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always
- 0
3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always
- 6144
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always
- 1218
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always
- 0
8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline
- 11363
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 3325
10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always
- 0
11 Calibration_Retry_Count 0x0012 253 002 000 Old_age Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 985
190 Temperature_Celsius 0x0022 160 124 000 Old_age Always
- 26
194 Temperature_Celsius 0x0022 160 124 000 Old_age Always
- 26
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always
- 4346055
196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always
- 0
201 Soft_Read_Error_Rate 0x000a 253 100 000 Old_age Always
- 0
202 TA_Increase_Count 0x0032 253 253 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 3315 -
# 2 Short offline Completed without error 00% 3298 -
# 3 Short offline Completed without error 00% 3268 -
# 4 Extended offline Completed without error 00% 3262 -
# 5 Short offline Completed without error 00% 3243 -
# 6 Short offline Completed without error 00% 3236 -
# 7 Short offline Completed without error 00% 3228 -
# 8 Extended offline Completed without error 00% 3218 -
# 9 Short offline Completed without error 00% 3186 -
#10 Short offline Completed without error 00% 3178 -
#11 Short offline Completed without error 00% 3175 -
#12 Short offline Completed without error 00% 3165 -
#13 Short offline Completed without error 00% 3155 -
#14 Short offline Completed without error 00% 3146 -
#15 Short offline Completed without error 00% 3139 -
#16 Extended offline Completed without error 00% 3135 -
#17 Short offline Completed without error 00% 3125 -
#18 Extended offline Completed without error 00% 3082 -
#19 Short offline Completed without error 00% 3068 -
#20 Short offline Completed without error 00% 3066 -
#21 Short offline Completed without error 00% 3052 -
SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
SMART Selective self-test log data structure revision number 0
Warning: ATA Specification requires selective self-test log data structure
revision number = 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Gabor
--
---------------------------------------------------------
MTA SZTAKI Computer and Automation Research Institute
Hungarian Academy of Sciences
---------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
