On Friday 11 January 2008, Borislav Petkov wrote:
> We test here for updated capacity descriptors by checking whether the media
> has changed instead of memcmp-ing with a cached copy of the capacity
> descriptors.
>
> Also:
>
> - remove one of 2 consecutive if (!i)-tests.
> - start loop at 1 in idefloppy_get_format_capacities() since userspace doesn't
> need the current/maximum capacity descriptor. i.e the first one.
> - fix comments formatting
>
> Signed-off-by: Borislav Petkov <[EMAIL PROTECTED]>
> ---
> drivers/ide/ide-floppy.c | 132 +++++++++++++++++----------------------------
> 1 files changed, 50 insertions(+), 82 deletions(-)
>
> diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
> index 679d48e..5c85833 100644
> --- a/drivers/ide/ide-floppy.c
> +++ b/drivers/ide/ide-floppy.c
> @@ -119,29 +119,7 @@ typedef struct idefloppy_packet_command_s {
>
> #define PC_SUPPRESS_ERROR 6 /* Suppress error
> reporting */
>
> -/*
> - * Format capacity
> - */
> -typedef struct {
> - u8 reserved[3];
> - u8 length; /* Length of the following
> descriptors in bytes */
> -} idefloppy_capacity_header_t;
minor nitpick:
idefloppy_capacity_header_t removal wasn't mentioned in the patch description
[...]
> @@ -1229,17 +1205,16 @@ static int idefloppy_get_sfrp_bit(ide_drive_t *drive)
> }
>
> /*
> - * Determine if a media is present in the floppy drive, and if so,
> - * its LBA capacity.
> + * Determine if a media is present in the floppy drive, and if so, its LBA
> + * capacity.
> */
> -static int idefloppy_get_capacity (ide_drive_t *drive)
> +static int idefloppy_get_capacity(ide_drive_t *drive)
Care to rename it to ide_floppy_get_capacity() while at it
(it has only two users)?
> {
> idefloppy_floppy_t *floppy = drive->driver_data;
> idefloppy_pc_t pc;
> - idefloppy_capacity_header_t *header;
> - idefloppy_capacity_descriptor_t *descriptor;
> - int i, descriptors, rc = 1, blocks, length;
> -
> + int i, desc_cnt, rc = 1, blocks, length;
> + u8 header_len;
desc_cnt (== header_len / 8) can be u8 as well
> drive->bios_cyl = 0;
> drive->bios_head = drive->bios_sect = 0;
> floppy->blocks = 0;
> @@ -1251,17 +1226,17 @@ static int idefloppy_get_capacity (ide_drive_t *drive)
> printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
> return 1;
> }
> - header = (idefloppy_capacity_header_t *) pc.buffer;
> - descriptors = header->length / sizeof(idefloppy_capacity_descriptor_t);
> - descriptor = (idefloppy_capacity_descriptor_t *) (header + 1);
> + header_len = pc.buffer[3];
> + desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
>
> - for (i = 0; i < descriptors; i++, descriptor++) {
> - blocks = descriptor->blocks = be32_to_cpu(descriptor->blocks);
> - length = descriptor->length = be16_to_cpu(descriptor->length);
> + for (i = 0; i < desc_cnt; i++) {
> + unsigned int desc_start = 4 + i*8;
missing newline
> + blocks = be32_to_cpu(*(u32 *)&pc.buffer[desc_start]);
> + length = be16_to_cpu(*(u16 *)&pc.buffer[desc_start + 6]);
if the last debug_log() call in the loop will be moved here
> - if (!i)
> + if (!i)
> {
the 'if (!i)' can be replaced with:
if (i)
continue;
> - switch (descriptor->dc) {
> + switch (pc.buffer[desc_start + 4] & 0x03) {
> /* Clik! drive returns this instead of CAPACITY_CURRENT */
> case CAPACITY_UNFORMATTED:
> if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags))
> @@ -1272,11 +1247,11 @@ static int idefloppy_get_capacity (ide_drive_t *drive)
> break;
> case CAPACITY_CURRENT:
> /* Normal Zip/LS-120 disks */
> - if (memcmp(descriptor, &floppy->capacity, sizeof
> (idefloppy_capacity_descriptor_t)))
> + if ((1UL << IDEFLOPPY_MEDIA_CHANGED) & floppy->flags)
Same issue as with similar change in patch #6:
[ Please note that idefloppy_get_capacity() is called from idefloppy_setup()
and IDEFLOPPY_MEDIA_CHANGED flag is first set in idefloppy_open(). ]
IMO it is the best to leave floppy->capacity alone for now.
> printk(KERN_INFO "%s: %dkB, %d blocks, %d "
> "sector size\n", drive->name,
> blocks * length / 1024, blocks, length);
> - floppy->capacity = *descriptor;
> +
> if (!length || length % 512) {
> printk(KERN_NOTICE "%s: %d bytes block size "
> "not supported\n", drive->name, length);
> @@ -1303,9 +1278,8 @@ static int idefloppy_get_capacity (ide_drive_t *drive)
> "in drive\n", drive->name);
> break;
> }
> - }
> - if (!i) {
> - debug_log("Descriptor 0 Code: %d\n", descriptor->dc);
> + debug_log("Descriptor 0 Code: %d\n",
> + pc.buffer[desc_start + 4] & 0x03);
minor CodingStyle nitpick:
debug_log("Descriptor 0 Code: %d\n",
pc.buffer[desc_start + 4] & 0x03);
> }
> debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n",
> i, blocks * length / 1024, blocks, length);
> @@ -1321,35 +1295,32 @@ static int idefloppy_get_capacity (ide_drive_t *drive)
> }
>
> /*
> -** Obtain the list of formattable capacities.
> -** Very similar to idefloppy_get_capacity, except that we push the capacity
> -** descriptors to userland, instead of our own structures.
> -**
> -** Userland gives us the following structure:
> -**
> -** struct idefloppy_format_capacities {
> -** int nformats;
> -** struct {
> -** int nblocks;
> -** int blocksize;
> -** } formats[];
> -** } ;
> -**
> -** userland initializes nformats to the number of allocated formats[]
> -** records. On exit we set nformats to the number of records we've
> -** actually initialized.
> -**
> -*/
> + * Obtain the list of formattable capacities.
> + * Very similar to idefloppy_get_capacity, except that we push the capacity
> + * descriptors to userland, instead of our own structures.
> + *
> + * Userland gives us the following structure:
> + *
> + * struct idefloppy_format_capacities {
> + * int nformats;
> + * struct {
> + * int nblocks;
> + * int blocksize;
> + * } formats[];
> + * } ;
nitpicking taken to an extreme:
I would replace spaces with tabs while at it...
> + *
> + * userland initializes nformats to the number of allocated formats[]
> + * records. On exit we set nformats to the number of records we've
> + * actually initialized.
> + *
> + */
>
> static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user
> *arg)
ide_floppy_get_format_capacities() (only one user)? :)
> {
> idefloppy_pc_t pc;
would be nice to fix this whitespace damage while at it
> - idefloppy_capacity_header_t *header;
> - idefloppy_capacity_descriptor_t *descriptor;
> - int i, descriptors, blocks, length;
> - int u_array_size;
> - int u_index;
> + int i, desc_cnt, blocks, length, u_array_size, u_index;
> int __user *argp;
> + u8 header_len;
desc_cnt can be u8
> if (get_user(u_array_size, arg))
> return (-EFAULT);
> @@ -1362,28 +1333,25 @@ static int
> idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
> printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
> return (-EIO);
> }
Care to fix the above whitespace damage while at it?
[...]
Otherwise it looks good. Please recast/resubmit.
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
