Hi

Bartlomiej Zolnierkiewicz schrieb:
As a workaround you can try using IDE subsystem siimage driver and pass
"idex=ata66" option or modify Tejun's patch to also override device side
cable detection by replacing ATA_CBL_PATA80 with ATA_CBL_PATA40_SHORT.
I'll try this.

Could you send the output of 'lspci -vvv -xxx' command?
03:04.0 RAID bus controller: Silicon Image, Inc. PCI0680 Ultra ATA-133 Host Controller (rev 02) Subsystem: Silicon Image, Inc. Winic W-680 (Silicon Image 680 based) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 4 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at df00 [size=8]
        Region 1: I/O ports at de00 [size=4]
        Region 2: I/O ports at dd00 [size=8]
        Region 3: I/O ports at dc00 [size=4]
        Region 4: I/O ports at db00 [size=16]
        Region 5: Memory at fdcff000 (32-bit, non-prefetchable) [size=256]
        [virtual] Expansion ROM at fdb00000 [disabled] [size=512K]
        Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-
        Kernel driver in use: pata_sil680
00: 95 10 80 06 07 00 90 02 02 00 04 01 01 40 00 00
10: 01 df 00 00 01 de 00 00 01 dd 00 00 01 dc 00 00
20: 01 db 00 00 00 f0 cf fd 00 00 00 00 95 10 80 36
30: 00 00 00 00 60 00 00 00 00 00 00 00 0f 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 00 22 06 00 40 00 64 00 00 00 00 00 00 00 00
70: 08 00 00 00 00 60 1f 7c 08 00 00 00 00 30 1f 7c
80: 03 00 00 00 02 00 00 00 00 00 11 00 09 19 22 51
90: 00 fe 00 0d ff ff ff 3b 00 00 00 19 00 00 00 00
a0: 01 62 c1 10 c1 10 8a 32 c1 10 92 43 07 40 09 40
b0: 01 62 c1 10 c1 10 8a 32 c1 10 92 43 00 40 09 40
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Regards
  Tobias

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature

Reply via email to