On Sun, 13 Jan 2008, Tejun Heo wrote:
Does this change anything? And, yeah, I really wanna see the hdparm
--Istdout too.
I will apply the patch and test it as you have requested.
To be clear, the output of the hpdarm -Istdout /dev/hde command that I reported
a few minutes ago was performed with a vanilla 2.6.23.12 kernel that, as
you pointed out, was utilizing the it821x driver rather than the
pata_it821x driver. That may be obvious to you, but I thought I should
be explicit about it.
Now, with reference to the 2.6.23.12 kernel with the unpatched version
of the libata code, I don't
think I can do much with hdparm since the raid array does not seem to be
recognized as a device. If my understanding is correct based on the
kernel boot messages, it seems to me that pata_it821x is going to treat
the array as a scsi block device, which on my system will configure as
/dev/sdb if the array is recognized.
Marc H. Zuckman
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
