On Sat, Feb 16, 2008 at 06:48:24PM +0100, Bartlomiej Zolnierkiewicz wrote:
> On Saturday 16 February 2008, Borislav Petkov wrote:
> > On Sat, Feb 16, 2008 at 04:24:01PM +0100, Bartlomiej Zolnierkiewicz wrote:
> > >
> > > Hi,
> > >
> > > On Saturday 16 February 2008, Borislav Petkov wrote:
> > > > On Fri, Feb 15, 2008 at 02:53:27PM -0500, Stefan Bader wrote:
> > > > > Hello Borislav,
> > > > >
> > > > > I worked on a problem with an DVD driver (model=Optiarc DVD RW
> > > > > AD-5200A)
> > > > > which obviously has the same problem as some Matshita drives. The
> > > > > following patch was reported to enabled audio playing on this drive.
> > > > > Would this approach be suitable for upstream or are there other
> > > > > solutions to this problem?
> > > > >
> > > > > Regards,
> > > > > Stefan
> > > > >
> > > > > --- a/drivers/ide/ide-cd.c
> > > > > +++ b/drivers/ide/ide-cd.c
> > > > > @@ -2988,7 +2988,8 @@ int ide_cdrom_probe_capabilities (ide_drive_t
> > > > > *drive)
> > > > > if (strcmp(drive->id->model, "MATSHITADVD-ROM SR-8187") == 0 ||
> > > > > strcmp(drive->id->model, "MATSHITADVD-ROM SR-8186") == 0 ||
> > > > > strcmp(drive->id->model, "MATSHITADVD-ROM SR-8176") == 0 ||
> > > > > - strcmp(drive->id->model, "MATSHITADVD-ROM SR-8174") == 0)
> > > > > + strcmp(drive->id->model, "MATSHITADVD-ROM SR-8174") == 0 ||
> > > > > + strcmp(drive->id->model, "Optiarc DVD RW AD-5200A") == 0)
> > > > > CDROM_CONFIG_FLAGS(drive)->audio_play = 1;
> > > > >
> > > > > #if ! STANDARD_ATAPI
> > > >
> > > > Hi Stefan,
> > > >
> > > > just to make sure that the audioplay bit is not set in the capabilities
> > > > page,
> > > > can you please try the following patch applied against 2.6.25-rc2 and
> > > > send me
> > > > the output. Thanks!
> > > >
> > > > @Bart: by the way, this cdi->mask thingy is kinda unintuitive doing
> > > > double
> > > > negation to check whether a feature is supported or not. Yeah, this
> > > > comes from
> > > > "above," i.e. uniform cdrom layer. But still, shouldn't we use a
> > > > cdi->caps_flags
> > > > or something similar instead, which mirrors the caps page bits setting?
> > >
> > > It seems so (at least having negative flags is very unintuitive) but they
> > > might be some reason for this ugliness, Jens?
> > >
> > > [ Please also remember that since cdrom layer is _uniform_ it may be not
> > > possible and/or desirable to have 1-1 mapping between caps page bits
> > > and the future cdi->caps_flags. ]
> > >
> > > > commit 435f0f4496a1b32af2d542f43b2370a890fe2f83
> > > > Author: Borislav Petkov <[EMAIL PROTECTED]>
> > > > Date: Sat Feb 16 09:56:36 2008 +0100
> > > >
> > > > ide-cd: Enable audio play quirk for Optiarc DVD RW AD-5200A drive
> > > >
> > > > Reported-by: Stefan Bader <[EMAIL PROTECTED]>
> > > > Signed-off-by: Borislav Petkov <[EMAIL PROTECTED]>
> > > >
> > > > diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
> > > > index f77db6b..2c9d06e 100644
> > > > --- a/drivers/ide/ide-cd.c
> > > > +++ b/drivers/ide/ide-cd.c
> > > > @@ -1750,6 +1750,10 @@ int ide_cdrom_probe_capabilities (ide_drive_t
> > > > *drive)
> > > > cdi->mask &= ~(CDC_DVD_RAM | CDC_RAM);
> > > > if (buf[8 + 3] & 0x10)
> > > > cdi->mask &= ~CDC_DVD_R;
> > > > + if (!(buf[8 + 4] & 0x01)) {
> > >
> > > Hmm, shouldn't there be '&& (cd->cd_flags & IDE_CD_FLAG_PLAY_AUDIO_OK)'
> > > to prevent false positives?
> >
> > I wanted to see whether the caps page reports the audioplay bit off...
>
> we still need IDE_CD_FLAG_PLAY_AUDIO_OK flag to be _set_ to enable the quirk
>
> > >
> > > > + printk(KERN_INFO "ide-cd: audio play not advertised in
> > > > caps page,"
> > >
> > > Would be nice to also printk() the device name.
> >
> > ... but printing the device model is actually a good idea and this will
> > rule out
> > false positives, so Stefan, please drop the previous patch and test the
> > updated
> > one below. Thanks.
> >
> >
> > commit 6cc44b0ce5c9270b15d456eb9ffa91b855e4e0d0
> > Author: Borislav Petkov <[EMAIL PROTECTED]>
> > Date: Sat Feb 16 09:56:36 2008 +0100
> >
> > ide-cd: Enable audio play quirk for Optiarc DVD RW AD-5200A drive
> >
> > Reported-by: Stefan Bader <[EMAIL PROTECTED]>
> > Signed-off-by: Borislav Petkov <[EMAIL PROTECTED]>
> >
> > diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
> > index f77db6b..4c9984f 100644
> > --- a/drivers/ide/ide-cd.c
> > +++ b/drivers/ide/ide-cd.c
> > @@ -1750,6 +1750,11 @@ int ide_cdrom_probe_capabilities (ide_drive_t *drive)
> > cdi->mask &= ~(CDC_DVD_RAM | CDC_RAM);
> > if (buf[8 + 3] & 0x10)
> > cdi->mask &= ~CDC_DVD_R;
> > + if (!(buf[8 + 4] & 0x01)) {
> > + printk(KERN_INFO "ide-cd: audio play not advertised in caps "
> > + "page for drive model [%s], enabling quirk.\n",
> > + drive->id->model);
>
> if IDE_CD_FLAG_PLAY_AUDIO_OK flag is not set the above message is _bogus_
> (because the quirk won't be enabled)
>
> [ how's about just deleting the whole printk() to preserve simplicity? ]
>
> > + }
> > if ((buf[8 + 4] & 0x01) || (cd->cd_flags & IDE_CD_FLAG_PLAY_AUDIO_OK))
> > cdi->mask &= ~CDC_PLAY_AUDIO;
> >
> > @@ -1929,6 +1934,7 @@ static const struct cd_list_entry
> > ide_cd_quirks_list[] = {
> > { "MATSHITADVD-ROM SR-8186", NULL, IDE_CD_FLAG_PLAY_AUDIO_OK },
> > { "MATSHITADVD-ROM SR-8176", NULL, IDE_CD_FLAG_PLAY_AUDIO_OK },
> > { "MATSHITADVD-ROM SR-8174", NULL, IDE_CD_FLAG_PLAY_AUDIO_OK },
> > + { "Optiarc DVD RW AD-5200A", NULL, IDE_CD_FLAG_PLAY_AUDIO_OK },
But the flag _is_ set because the drive is added to the quirk list (line above
^) and
ide_cdrom_setup() calls ide_cd_flags() to set the proper flags for cd->cd_flags
and later on
ide_cdrom_probe_capabilities() works on the same cd->cd_flags for testing
IDE_CD_FLAG_PLAY_AUDIO_OK, or have i gone blind completely...?
> > { NULL, NULL, 0 }
> > };
--
Regards/Gruß,
Boris.
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
