Try cat /proc/interrupts.
CIGAN.
On Sun, 16 May 1999, Alex Dubrovsky wrote:
|Hi all.
|i'm trying to use the above card , and here is what i get:[root@server
|/root]# modprobe hisax type=12 protocol=2 irq=11 io=0x0100
|ISDN subsystem Rev: 1.55/1.47/1.55/1.33/1.10/1.2 loaded
|ISDNLink: IRQ(11) getting no interrupts during init 1
|ISDNLink: IRQ(11) getting no interrupts during init 2
|ISDNLink: IRQ(11) getting no interrupts during init 3
|HiSax: Card ISDNLink not installed !
|/lib/modules/2.2.7/misc/hisax.o: init_module: Device or resource busy
|ISDN-subsystem unloaded
|[root@server /root]#
|
|======
|The io and the irq are taken from the isapnp.conf which is used to
|initialize the card.
|Anyone got any ideas?
|
|P.S. I'm running kernel 2.2.7 on RH5.2 and asus p2b motherboard
|
|
|______________________________________________________
|Get Your Private, Free Email at http://www.hotmail.com
|
|
