Try an EtherExpress (intel card). it is worth the price difference and
works like a charm under Linux.
Dani
On Tue, 15 Aug 2000, Noam Ben Haim wrote:
> I just succeeded in installing when choosing DHCP. alas we don't have DHCP
> server, so I need to configure it myself. what's more, I get the following
> warnings in boot time:
>
> WARNING: the PCI BIOS assigned this PCI NE2k card to IRQ 0, which is
> unlikely to work!
> You should use the PCI BIOS setup to assign a valid IRQ line.
> ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0xe000, IRQ 0
> eth0: RealTek RTL-8029 found at I/O 0xe000 IRQ 0
>
> what should I do next?
> plz help
>
> N
> -----Original Message-----
> From: Isaac Aaron [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, 15 August, 2000 9:05 AM
> To: Noam Ben Haim
> Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Subject: Re: installation problems RH6.2
>
>
>
> How about removing the NIC, reinstalling and placing it back again?
>
> Isaac Aaron
>
>
>
>
> "Noam Ben
> Haim" <noambh To: <[EMAIL PROTECTED]>
> @ cc:
> onsetinc.com> Subject: installation problems
> RH6.2
> Sent by:
> linux-il-boun
> ce@
> cs.huji.ac.il
>
>
> 15/08/00
> 10:16
>
>
>
>
>
> HI all
>
> I added a PCI Network card, and since then I can't reinstall RH6.2. the
> installation process is stuck at the point of doing the post installation
> configuration. and I have to reboot the computer, ruining the
> installation...
> plz help
> N
>
> Noam Ben Haim
> [EMAIL PROTECTED]
> Tel: +972-9-9561615 ext 122
> Fax: +972-9-9561610
>
>
>
>
> =================================================================
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]
>
>
>
>
>
> =================================================================
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]
>
>
=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]