On Mon, 15 Dec 2003, Jonathan Ben Avraham wrote:
> Hi,
> The YES remote control is apparently an OEM Pace RC 10. That solved
> the problem, as the Pace RC 10 unit is documented.
> Thanks,
There must be different YES remote controls then. My RC is similar to
pace RC-10 (same data parameters and same pre-data), but the button
values are different. The buttons on pace RC-10 (at least as they appear
in the lirc remotes package) are also labeled different.
Attached is the lircd.conf for yes, as I captured.
--
Matan Ziv-Av. [EMAIL PROTECTED]
-- Attached file included as plaintext by Listar --
-- File: lircd.conf
# Please make this file available to others
# by sending it to <[EMAIL PROTECTED]>
#
# this config file was automatically generated
# using lirc-0.6.6(serial) on Tue Nov 25 12:19:39 2003
#
# contributed by
#
# brand: xxx.conf
# model no. of remote control:
# devices being controlled by this remote:
#
begin remote
name YES
bits 16
flags SPACE_ENC|CONST_LENGTH
eps 30
aeps 100
header 9042 4558
one 555 1682
zero 555 570
ptrail 544
repeat 9041 2296
pre_data_bits 16
pre_data 0x213C
gap 108556
min_repeat 1
toggle_bit 0
begin codes
power 0x000000000000847B
1 0x0000000000000CF3
2 0x000000000000946B
3 0x0000000000009C63
4 0x00000000000014EB
5 0x00000000000004FB
6 0x0000000000001CE3
7 0x0000000000004CB3
8 0x00000000000054AB
9 0x00000000000044BB
exit 0x0000000000008C73
0 0x000000000000CC33
10 0x000000000000F40B
mute 0x000000000000A45B
return 0x0000000000005CA3
vol+ 0x000000000000649B
vol- 0x000000000000E41B
channel+ 0x000000000000AC53
channel- 0x000000000000EC13
guide 0x000000000000748B
mosaic 0x0000000000006C93
yes 0x000000000000C43B
up 0x000000000000D42B
down 0x00000000000024DB
left 0x0000000000002CD3
right 0x000000000000DC23
? 0x00000000000034CB
+ 0x0000000000003CC3
orange 0x0000000000007C83
green 0x000000000000B44B
yellow 0x000000000000BC43
blue 0x000000000000FC03
envelope 0x000000000000C23D
B 0x00000000000042BD
A 0x000000000000827D
i 0x00000000000002FD
end codes
end remote
=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
