Hi All, I apologize in advance for what may be implicated by my question... ;-)
**************** ** What I have ** **************** I have a Compaq Presario 2540 EA with the following lspci output: 00:00.0 Host bridge: ATI Technologies Inc: Unknown device cbb2 (rev 02) 00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M] 00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02) 00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV] 00:08.0 Modem: ALi Corporation Intel 537 [M5457 AC-Link Modem] 00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller 00:0b.0 USB Controller: VIA Technologies, Inc. USB (rev 50) 00:0b.1 USB Controller: VIA Technologies, Inc. USB (rev 50) 00:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) 00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) 00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4) 00:11.0 Bridge: ALi Corporation M7101 PMU 00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 340M Running MDK 9.2 with Kernel 2.4.22-10mdk ****************************** ** What I want to fix / change ** ****************************** I have the following problems: [1] No APM / ACPI Support: When removing the 'apm=off acpi=off' from the 'append' line in /etc/lilo.conf the comp freezes after lilo prompt. [2] No IEEE1394 (FireWire) Support: When trying to load the 'ohci1394 module - comp freezes [3] No AC-Link Modem Support: Can't find the right driver (ALi? Intel?) [4] Unknown Device cbb2 ? (first lino on lspci) [5] No Specific module for Graphics Chip: Runs well with bothe readon driver from XFree86 and ATI bunduled, but no full screen with FBDEV. [6] USB: After mounting and writing to a USB-Storage device (DiskOnKey) comp freezes. [7] IR Port: Could not find the COM Port it uses. No item in BIOS. Seems to be only /dev/ttyS0. Will not react to my Palm Pilot IIIxe InfraRed HotSync. Any one has experience working it? I tried with KPilot 3.1.3-22mdk. Thanks, :====================================================:. Amichai Rotman Short text-only e-mails: [EMAIL PROTECTED] UIN#: 6401746 Registered Linux User#: 201192 ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
