Hi,

Here's the dump:
/sbin/lspci -n

00:00.0 0600: 8086:1a30 (rev 11)
00:01.0 0604: 8086:1a31 (rev 11)
00:1d.0 0c03: 8086:24c2 (rev 01)
00:1d.1 0c03: 8086:24c4 (rev 01)
00:1d.2 0c03: 8086:24c7 (rev 01)
00:1d.7 0c03: 8086:24cd (rev 01)
00:1e.0 0604: 8086:244e (rev 81)
00:1f.0 0601: 8086:24c0 (rev 01)
00:1f.1 0101: 8086:24cb (rev 01)
00:1f.3 0c05: 8086:24c3 (rev 01)
01:00.0 0300: 1002:5964 (rev 01)
02:03.0 0401: 13f6:0111 (rev 10)
02:0a.0 0280: 1814:0302
02:0c.0 0401: 1102:0002 (rev 0a)
02:0c.1 0980: 1102:7002 (rev 0a)

/sbin/lspci -v
02:0a.0 Network controller: RaLink Unknown device 0302
Subsystem: D-Link System Inc Unknown device 3c11
Flags: bus master, slow devsel, latency 32, IRQ 255
Memory at de000000 (32-bit, non-prefetchable)
disabled] [size=32K]
Capabilities: [40] Power Management version 2

Thanks

Erez

--- Matan Ziv-Av <[EMAIL PROTECTED]> wrote:

> On Sat, 22 Jul 2006, Erez Boym wrote:
> 
> > Hi,
> >
> > Anyone have experience and can guide me to drivers
> for
> > my D-Link DWL G520+A PCI WiFi NIC ?
> 
> The name is not always useful, especially for D-Link
> cards, since that 
> company has a habit of changing chipsets while
> keeping the name on the 
> box.
> 
> If you have the card in a computer, please report
> the output from
> 
> lspci -n
> 
> As a general rule - this also applies to any
> question of this kind. For 
> USB devices the output of lsusb is needed and for
> PCCards, lspci -n and 
> cardctl info (or maybe pccardctl info).
> 
> You can also search for yourself. lspci will give
> you the chipset 
> manufacturer, searchiing in google for this name and
> linux, usually 
> gives you the answer immediately.
> 
> 
> 
> -- 
> Matan Ziv-Av.                        
> [EMAIL PROTECTED]
> 
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Reply via email to