On 11/18/2010 11:35 AM, David Ronkin wrote:
Boris hi,
Can you provide decent place for downloading & installing of rt2800usb
I have compile errors while "make" of one 1 found?
I Had the same problems, till I've downloaded and installed the kernel
and linux-firmware-nonfree packages from Natty's repository:
http://packages.ubuntu.com/natty/kernel/
Cheers
--
Meir Kriheli
2010/11/18 Boris shtrasman <borissh1...@gmail.com
<mailto:borissh1...@gmail.com>>
When dealing with newer then 2860 cards afaik there is no stable
mainline kernel support (I hope it is the correct term)
2010/11/17 David Ronkin <dron...@gmail.com <mailto:dron...@gmail.com>>
Hi
I bought Edimax EW-7711USN usb adapter (with linux support
written on the box).
Looks like the driver is found by my ubuntu 10.10 Maverick (on
titan laptop) but still i cannot go to web (i have open wireless
nw around) - getting the error below.
try to :
1) blacklist the rta2870sta and use rt2800usb or rt2x00
2) switch to compat-wireless (it solved my problems).
I googled for some time but gave up meanwhile,
Please kindly help!
Could you also replay with :
if you have wpa2 enc ap try to kill network manager (if it is on)
and start the plain old wpa_supplicant with debug values when
connecting and provide us the logs.
wlist wlan1 scan
tail /var/log/syslog after you connected the card to the system and
did and iwconfig.
Here some logs:
# lshw | grep wire
*-firewire
product: Firewire (IEEE 1394)
configuration: driver=firewire_ohci latency=32
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=rt73usb
driverversion=2.6.35-22-generic firmware=N/A link=no
multicast=yes wireless=IEEE 802.11bg
capabilities: ethernet physical wireless
configuration: broadcast=yes multicast=yes
wireless=Ralink STA
#iwconfig wlan1 essid Homek
#iwconfig
wlan1 Ralink STA ESSID:"" Nickname:"RT2870STA"
Mode:Auto Frequency=2.412 GHz Access Point:
Not-Associated
Bit Rate:1 Mb/s
RTS thr:off Fragment thr:off
Encryption key:off
Link Quality=10/100 Signal level:0 dBm Noise
level:-115 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
# dhclient wlan1
Internet Systems Consortium DHCP Client V3.1.3
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Listening on LPF/wlan1/00:1f:1f:c7:16:53
Sending on LPF/wlan1/00:1f:1f:c7:16:53
Sending on Socket/fallback
[snip]
You should be sure that you wore able to auth againgst the ap prior
to calling dhcpclient
DHCPDISCOVER on wlan1 to 255.255.255.255 port 67 interval 7
I talked about a card with the same chip on AP10 with some people
and all had the same results it basically overheats , crashes get
stuck and don't work.
_______________________________________________
Linux-il mailing list
Linux-il@cs.huji.ac.il <mailto:Linux-il@cs.huji.ac.il>
http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il
--
בברכה,
דוד רונקין
_______________________________________________
Linux-il mailing list
Linux-il@cs.huji.ac.il
http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il
_______________________________________________
Linux-il mailing list
Linux-il@cs.huji.ac.il
http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il