Hi,
The modem might not recognize the dial-tone of your exchange.
try atx1 to disable dial-tone detection.
Regards,
Soj.
kapil sharma wrote:
>
> Hi Everybody There ,
>
> Actually I'm trying to Configure 128 Kbps Zyxel Omni Modem on Redhat 6.2
> but unable to connect with it .Hereby I am outlining the steps I have
> performed .
>
> 1. To Enable the Modem for 128 Kbps connectivity I launched Minicom &
> performed following steps .
>
> 2. Typed AT Respnse OK
>
> 3 . Typed ATI Response 1281
>
> 4 . Typed ATI1 Response ZYXEL OMNI
>
> 5. Now for enabling MULTILINK PPP I Typed 'AT&J3'
>
> 6 . For Saving the above done Configuration I Type ' AT&W0'.
>
> 7. Now I Save the Settings & Reset the Modem & Dial the VSNL Numbers
> Once at a time as well as Two Nos. at timt ' ATDI phone1+phone2' ( The
> Only Two Phone Numbers provided by VSNL are 3340410 , 6295844 --- Any
> Help In This matter !!!!!!!!! )
>
> 8 .But It does not Connect with the VSNL,( the ISP ) , It always says
> 'NO CARRIER ' or ' NO DIALTONE'
>
> 9. I'm Unable to decipher the exact cause of problem . The VSNL says
> their Phone Lines are up & running .
>
> 10 Kindly advise me in this matter what to do ?
>
> kapil sharma
>
> ----------------------------------------------
> Find out more about this and other Linux India
> mailing lists at http://lists.linux-india.org/
--
Sojan James
Consultant, National Semi. India Designs Ltd.
7/6 Brunton Road, Bangalore 560025. India.
Ph: 5587918/919/920 ext. 308
----------------------------------------------
Find out more about this and other Linux India
mailing lists at http://lists.linux-india.org/