Hi Nilesh,
Put the following in /etc/rc.d/rc.local :
insmod specialix
Add the following statements in your /etc/inittab :
W0:23:respawn:/sbin/getty ttyW0 DT9600 vt100
W1:23:respawn:/sbin/getty ttyW1 DT9600 vt100
W2:23:respawn:/sbin/getty ttyW2 DT9600 vt100
W3:23:respawn:/sbin/getty ttyW3 DT9600 vt100
W4:23:respawn:/sbin/getty ttyW4 DT9600 vt100
W5:23:respawn:/sbin/getty ttyW5 DT9600 vt100
W6:23:respawn:/sbin/getty ttyW6 DT9600 vt100
W7:23:respawn:/sbin/getty ttyW7 DT9600 vt100
You can change vt100 to whatever TERM u want.
Check whether u have got the following devices in /dev :
[root@rhlinux /dev]# l ttyW*
crw------- 1 root root 75, 0 May 18 10:24 ttyW0
crw------- 1 root root 75, 1 May 18 10:27 ttyW1
crw--w--w- 1 root root 75, 2 May 18 14:30 ttyW2
crw------- 1 root tty 75, 3 May 18 10:24 ttyW3
crw--w---- 1 ag2 tty 75, 4 May 18 14:23 ttyW4
crw------- 1 root tty 75, 5 May 18 12:56 ttyW5
crw--w---- 1 npp tty 75, 6 May 18 12:18 ttyW6
crw------- 1 root root 75, 7 May 18 10:24 ttyW7
If not create them with the major & minor no.'s given above. Use mknod for
that.
We have got here similar setup under Red Hat 6.2.
That's it
HTH.
Warm Regards
Rajesh
On Thu, May 17, 2001 at 09:21:04PM -0700, nilesh vaghela wrote:
>Thanx let me try it and I let U know tha result
>
>ThanX
>--- "Binand Raj S." <[EMAIL PROTECTED]> wrote:
>> >>>>> "nilesh" == nilesh vaghela
>> <[EMAIL PROTECTED]> writes:
>>
>> nilesh> Would like to configure I/O + serial
>> card with linux 6.0.
>>
--
Rajesh Fowkar
V. S. DEMPO & CO. LTD., PANAJI-GOA
Email ID : [EMAIL PROTECTED], [EMAIL PROTECTED]
Web Site : http://www.dempos.com
_______________________________________________
linux-india-help mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/linux-india-help
