On 30 Jan 2002 at 18:16, jagan wrote: > Jan 29 23:23:51 localhost pppd[3313]: pppd 2.4.0 started by root, uid 0 > Jan 29 23:23:51 localhost pppd[3313]: Using interface ppp0 > Jan 29 23:23:51 localhost pppd[3313]: Connect: ppp0 <--> /dev/ttyS0 > Jan 29 23:24:21 localhost pppd[3313]: LCP: timeout sending Config-Requests > Jan 29 23:24:21 localhost pppd[3313]: Connection terminated. > Jan 29 23:24:21 localhost pppd[3313]: Receive serial link is not 8-bit > clean: > Jan 29 23:24:21 localhost pppd[3313]: Problem: all had bit 7 set to 0 > Jan 29 23:24:21 localhost pppd[3313]: Exit.
There is an ATX setting to increase time out. Set it to 250. You can find those codes following kppp help. Don't remember them exactly. I used them when I was using eth. Had to wait long before getting connected. Is your line very noisy BTW? Shridhar _______________________________________________ linux-india-help mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/linux-india-help
