Hello Srikanth,
Try editing your /etc/xinetd.d/telnet file
and change the "disable" entry to "no" if it is "yes". Restart xinetd
and try again.
Regards,
G.Sriram.
**************************************************
Hi Listers,
This is the second mail on the above subject.
In my brother's office he has installed PCQLinux in his office.
The system configuration is as follows:
Pentium 600 Celeron processor, 64 MB RAM, 10 GB HDD and D-Link DE-528
Ethernet PC card.
Windows NT server is accessed by 5 clients. In one of the clients having
win95
PCQ LInux is installed(dual boot)
The problem is from win 95 clients nobody is able to access the linux box
through
telnet. From other win 95 clients he is able to ping the linux box with
zero
packet loss.
In PCQ Linux firewall is being enabled by default. In PCQ magazine it is
said
that it can be disabled by the command lokkit. He has used that command and
given no firewall. Firewall is disabling the eth0 by default. So, He has
also removed ipchains in the system.
But still he is not able to use Telnet from other Windows clients to access
this linux box.
There is no entry in /etc/hosts.allow and /etc/hosts.deny.
Please help.
Srikanth
Trivandrum
_______________________________________________
linux-india-help mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/linux-india-help
