Hello Linux Gurus, I am trying to install the Linux 7.2 sw on my NEC Versa VXi laptop.
I get the following message when I try to ping (my PC is directly connected to this machine and the physical connectiosn are OK - pinging when in Windows mode from the same PC and same Ethernet card works OK) : ping 172.16.80.43 SIOCDARP(priv): Network is unreachable I have the package kernel-pcmcia-cs-3.1.27-10 installed and my ethernet card is a EC2T Combo PCMCIA EthernetCard. I am getting the following error messages in the /var/log/messages file : cardmgr : config error, file './config.opts' line 8 : no function bindings and modprobe: Can't locate module eth1 I am attaching /var/log/messages , /etc/pcmcia/config.opts, /etc/modules.conf , /etc/sysconfig/network-scripts/ifcfg-eth1, /var/lib/pcmcia/stab files along with this email. Please advise as to what could be going wrong. Any help will be greatly appreciated. Thanks, Puneet ifcfg-eth1 : DEVICE=eth1 IPADDR=172.16.80.43 NETMASK=255.255.240.0 NETWORK=172.16.80.0 BROADCAST=172.16.95.255 ONBOOT=yes BOOTPROTO=none USERCTL=yes config.opts : # # Local PCMCIA Configuration File # #---------------------------------------------------------------------- # System resources available for PCMCIA devices include port 0x100-0x4ff, port 0xc00-0xcff include memory 0xc0000-0xfffff include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff # High port numbers do not always work... # include port 0x1000-0x17ff # Extra port range for IBM Token Ring include port 0xa00-0xaff # Resources we should not use, even if they appear to be available # First built-in serial port exclude irq 4 # Second built-in serial port #exclude irq 3 # First built-in parallel port exclude irq 7 # PS/2 Mouse controller port, comment this out if you don't have a PS/2 # based mouse exclude irq 12 #---------------------------------------------------------------------- # Examples of options for loadable modules # To fix sluggish network with IBM ethernet adapter... #module "pcnet_cs" opts "mem_speed=600" # Options for IBM Token Ring adapters #module "ibmtr_cs" opts "mmiobase=0xd0000 srambase=0xd4000" # Options for Raylink/WebGear driver: uncomment only one line... # Generic ad-hoc network module "ray_cs" opts "essid=ADHOC_ESSID hop_dwell=128 beacon_period=256 translate=1" # Infrastructure network for older cards #module "ray_cs" opts "net_type=1 essid=ESSID1" # Infrastructure network for WebGear #module "ray_cs" opts "net_type=1 essid=ESSID1 translate=1 hop_dwell=128 beacon_period=256" # Options for WaveLAN/IEEE driver (AccessPoint mode)... #module "wvlan_cs" opts "station_name=MY_PC" # Options for WaveLAN/IEEE driver (ad-hoc mode)... #module "wvlan_cs" opts "port_type=3 channel=1 station_name=MY_PC" # Options for Xircom Netwave driver... #module "netwave_cs" opts "domain=0x100 scramble_key=0x0" /etc/modules.conf : alias parport_lowlevel parport_pc alias eth1 eepro100 alias eth0 eepro100 alias sound-slot-0 i810_audio post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || : pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || : alias usb-controller usb-uhci /var/log/messages : Apr 12 12:56:14 craftpc cardmgr[2878]: starting, version is 3.1.22 Apr 12 12:56:14 craftpc cardmgr[2878]: config error, file './config.opts' line 8: no function bindings Apr 12 12:56:14 craftpc cardmgr[2878]: watching 2 sockets Apr 12 12:56:14 craftpc kernel: cs: IO port probe 0x0c00-0x0cff: clean. Apr 12 12:56:14 craftpc kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x400-0x44f 0x4d0-0x4d7 Apr 12 12:56:14 craftpc kernel: cs: IO port probe 0x0a00-0x0aff: clean. Apr 12 12:56:14 craftpc cardmgr[2878]: initializing socket 1 Apr 12 12:56:14 craftpc kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Apr 12 12:56:14 craftpc cardmgr[2878]: socket 1: NE2000 Compatible Ethernet Apr 12 12:56:15 craftpc cardmgr[2878]: product info: "Linksys", "Combo PCMCIA EthernetCard (EC2T)", "2.0" Apr 12 12:56:15 craftpc cardmgr[2878]: manfid: 0x0149, 0xc1ab function: 6 (network) Apr 12 12:56:15 craftpc cardmgr[2878]: executing: 'modprobe 8390' Apr 12 12:56:15 craftpc cardmgr[2878]: executing: 'modprobe pcnet_cs' Apr 12 12:56:15 craftpc cardmgr[2878]: executing: './network start eth1' Apr 12 12:56:15 craftpc kernel: eth1: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:04:5A:98:F9:14 Apr 12 12:56:15 craftpc modprobe: modprobe: Can't locate module eth1^M Apr 12 13:07:17 craftpc cardmgr[2878]: executing: './network check eth1' Apr 12 13:07:17 craftpc cardmgr[2878]: shutting down socket 1 Apr 12 13:07:17 craftpc cardmgr[2878]: executing: './network stop eth1' Apr 12 13:07:17 craftpc cardmgr[2878]: executing: 'modprobe -r pcnet_cs' Apr 12 13:07:17 craftpc cardmgr[2878]: executing: 'modprobe -r 8390' Apr 12 13:07:17 craftpc cardmgr[2878]: exiting Apr 12 13:07:19 craftpc kernel: unloading Kernel Card Services Apr 12 13:07:26 craftpc kernel: Linux Kernel Card Services 3.1.22 Apr 12 13:07:26 craftpc kernel: options: [pci] [cardbus] [pm] Apr 12 13:07:27 craftpc kernel: PCI: Found IRQ 10 for device 00:03.1 Apr 12 13:07:27 craftpc kernel: PCI: Sharing IRQ 10 with 00:00.1 Apr 12 13:07:27 craftpc kernel: PCI: Found IRQ 5 for device 00:03.0 Apr 12 13:07:27 craftpc kernel: PCI: Sharing IRQ 5 with 00:06.0 Apr 12 13:07:27 craftpc kernel: PCI: Sharing IRQ 5 with 00:06.1 Apr 12 13:07:27 craftpc kernel: Yenta IRQ list 0898, PCI irq10 Apr 12 13:07:27 craftpc kernel: Socket status: 30000006 Apr 12 13:07:27 craftpc kernel: Yenta IRQ list 0898, PCI irq5 Apr 12 13:07:27 craftpc kernel: Socket status: 30000010 Apr 12 13:07:27 craftpc cardmgr[3146]: starting, version is 3.1.22 Apr 12 13:07:27 craftpc cardmgr[3146]: config error, file './config.opts' line 8: no function bindings Apr 12 13:07:27 craftpc cardmgr[3146]: watching 2 sockets Apr 12 13:07:27 craftpc kernel: cs: IO port probe 0x0100-0x03ff: excluding 0x378-0x37f Apr 12 13:07:27 craftpc kernel: cs: IO port probe 0x0a00-0x0aff: clean. Apr 12 13:07:27 craftpc cardmgr[3146]: initializing socket 1 Apr 12 13:07:27 craftpc kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Apr 12 13:07:27 craftpc cardmgr[3146]: socket 1: NE2000 Compatible Ethernet Apr 12 13:07:28 craftpc cardmgr[3146]: product info: "Linksys", "Combo PCMCIA EthernetCard (EC2T)", "2.0" Apr 12 13:07:28 craftpc cardmgr[3146]: manfid: 0x0149, 0xc1ab function: 6 (network) Apr 12 13:07:28 craftpc cardmgr[3146]: executing: 'modprobe 8390' Apr 12 13:07:28 craftpc cardmgr[3146]: executing: 'modprobe pcnet_cs' Apr 12 13:07:28 craftpc cardmgr[3146]: executing: './network start eth1' Apr 12 13:07:28 craftpc kernel: eth1: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:04:5A:98:F9:14 Apr 12 13:07:28 craftpc modprobe: modprobe: Can't locate module eth1^M /var/lib/pcmcia/stab : Socket 0: empty Socket 1: NE2000 Compatible Ethernet 1 network pcnet_cs 0 eth1 _______________________________________________ linux-india-help mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/linux-india-help
