Hi, On our new Red Hat 7.2 server, on console the eepro100 timeout message is coming after say around 5 minutes of booting the machine.
eepro100: wait_for_cmd_done timeout! What does this error indicate ? Once this error comes, no machine can ping to this server. However after restarting the network service pinging works but again after 5-10 minutes above error. Anything wrong in my network settings ? /etc/sysconfig/network contains : NETWORKING=yes HOSTNAME=appserver.dempos.com GATEWAY= /etc/sysconfig/network-scripts/ifcfg-eth0 contains : DEVICE=eth0 BOOTPROTO=static IPADDR=192.168.20.3 NETMASK=255.255.255.0 ONBOOT=yes Thanks in advance. Peace -- Rajesh : ####[ Linux One Stanza Tip (LOST) ]########################### Sub : Contents of bzipped tarball LOST #102 To search the contents of a .tar.bz2 without decompressing try : tar -tjf file.tar.bz2 | grep "something" (OR try bzcat) Note : In some versions of tar '-j' is not recognised. You may have to use -I switch there (viz. 'tar -tIf file.tar.bz2'). ####<[EMAIL PROTECTED]>######################################## : ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 _______________________________________________ linux-india-help mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/linux-india-help
