hi,
i pasted my /etc/modules.conf, and even i tried login scripts specified one of
the user here, and in windows when i check, it shows it as PAP, not chap, this
is what i got in the details down. i m getting the erros messages in linux as
its for another connection. but the error i found in /var/log/messages in both
the isp accounts are same..so is there anything wrong in my os itself ? i m
using rh 7.3, without any upgrade. freshly installed,
Prabhu.
[root@comp1 ppp]# wvdial vasnet
--> WvDial: Internet dialer version 1.41
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0
OK
--> Sending: ATL1
ATL1
OK
--> Modem initialized.
--> Sending: ATDT 451026
--> Waiting for carrier.
ATDT 451026
CONNECT 33600/ARQ/V34/LAPM/V42BIS
--> Carrier detected. Waiting for prompt.
Returning not ok!!
--> Disconnecting at Fri Jan 24 18:26:22 2003
[root@comp1 ppp]#
[root@comp1 ppp]# cat /var/log/messages
Jan 24 18:22:06 comp1 modprobe: modprobe: Can't locate module ppp0
Jan 24 18:22:06 comp1 modprobe: modprobe: Can't locate module ppp0
Jan 24 18:22:06 comp1 kernel: CSLIP: code copyright 1989 Regents of the
University of California
Jan 24 18:22:06 comp1 modprobe: modprobe: Can't locate module ppp0
Jan 24 18:22:06 comp1 kernel: PPP generic driver version 2.4.2
Jan 24 18:22:06 comp1 pppd[2246]: pppd 2.4.1 started by root, uid 0
Jan 24 18:22:06 comp1 modprobe: modprobe: Can't locate module ppp0
Jan 24 18:22:36 comp1 last message repeated 266 times
Jan 24 18:22:36 comp1 pppd[2246]: Terminating on signal 15.
Jan 24 18:22:36 comp1 pppd[2246]: Exit.
Jan 24 18:24:23 comp1 modprobe: modprobe: Can't locate module ppp0
Jan 24 18:24:23 comp1 modprobe: modprobe: Can't locate module ppp0
Jan 24 18:24:23 comp1 pppd[2523]: pppd 2.4.1 started by root, uid 0
Jan 24 18:24:24 comp1 modprobe: modprobe: Can't locate module ppp0
Jan 24 18:24:53 comp1 last message repeated 269 times
Jan 24 18:24:53 comp1 pppd[2523]: Terminating on signal 15.
Jan 24 18:24:53 comp1 pppd[2523]: Exit.
[root@comp1 ppp]#
hi,
Pasting my /etc/modules.conf
cat /etc/modules.conf
alias parport_lowlevel parport_pc
alias eth0 8139too
alias usb-controller usb-uhci
alias sound-slot-0 es1371
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L
>/dev/null
2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S
>/dev/null 2>&1
|| :
[root@comp1 root]#
On Wed, Jan 22, 2003 at 03:14:14PM +0000, Prabhu wrote:
> Jan 22 18:50:18 comp1 modprobe: modprobe: Can't locate module ppp0
See that? Show us your /etc/modules.conf.
Binand
>recently i posted here about Bsnl dailup connection, some one
suggested me to >use the wvdial.
>
wvdial is supposed to be an intelligent dialer. It figures out whether
the ISP is using PAP or CHAP and feed in the values as required. Just
fill up the secrets file with your login parameters and it will do the
rest.
>those Bsnl people they said something is changed on server side but
the dont >know what exactly is it. >in windows the changes made disabled the
login prompt which we get after dialup, that is black windows for entering
login name and password, insted, we have to specify password before dailing it
and then it logs on directly,
---That's CHAP. Your windows dialer does the fill up.
Ami
________________________________________________________________________
Missed your favourite TV serial last night? Try the new, Yahoo! TV.
visit http://in.tv.yahoo.com
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
_______________________________________________
linux-india-help mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/linux-india-help
