> >Hi, > >I am running Yamha OPL3-SAx iSA sound card in Redhat Linux for two years. > >If u need the configuration i can send it to u. > > Sorry i was away sodelayin reply. The redhat 6.0 and 6.1 and 5.2 automaticaly recognise these cards but if not try this. I tried to set the Yamha OPL3SAx in Redhat 5.0 manualy Folowing are the steps 1. run pnpdump >> abc as a root user it will dump all information regarding pnp cards you have in your BOX. then copy the the relvant contents to /etc/isapnp.conf in my case this file is <snip> # (DEBUG) (READPORT 0x0203) (ISOLATE PRESERVE) (IDENTIFY *) # ANSI string -->OPL3-SA3 Sound Board<-- (CONFIGURE YMH0020/-1 (LD 0 (IO 0 (BASE 0x0220)) (IO 1 (BASE 0x0530)) (IO 2 (BASE 0x0388)) (IO 3 (BASE 0x0330)) (IO 4 (BASE 0x0370)) (INT 0 (IRQ 7 (MODE +E))) (DMA 0 (CHANNEL 0)) (DMA 1 (CHANNEL 1)) (ACT Y) )) <snip> Then the contents of my /etc/conf.modules file # Sound alias sound opl3sa2 alias midi opl3 options opl3 io=0x388 options opl3sa2 io=0x370 mss_io=0x530 irq=7 dma=0 dma2=1 mpu_io=0x330 alias ppp-compress-21 bsd_comp alias ppp-compress-24 ppp_deflate alias ppp-compress-26 ppp_deflate I think u will be able to run Yamha card. *~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~* Dr. S. K. Singh, Agril. Res. Services. Scientist (AG&B) and I/C ARIS Cell, CIRG, Makhdoom, Farah, Mathura 281122, India. Ph. 91-565-7-63334(R) 63246 (Fax), 63325 (O) *_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_* -------------------------------------------------------------------- The Linux India Mailing List Archives are now available. Please search the archive at http://lists.linux-india.org/ before posting your question to avoid repetition and save bandwidth.