Hi friends,
When I start wvdial I get the following error :
[rajesh@rajesh] ~$ wvdial
--> WvDial: Internet dialer version 1.40
--> Cannot open /dev/ttyS0: Device or resource busy
I ran the command wvdialconf /etc/wvdial.conf and it created /etc/wvdial.conf
with all the necessary entries.
Why wvdial is giving the above error. My Modem is on COM1 ie.: ttyS0 and no
other dialer software such as kppp was running when I started wvdial.
Since I have created a symbolic link to ttyS0 (/etc/modem), which I am using in
KPPP. I changed /dev/ttyS0 to /dev/modem in /etc/wvdial.conf but the same
error.
Contents of my /etc/wvdial.conf are as follows :
-----------------------------------------------------------------------------------------------------------------------------
[Dialer Defaults]
Modem = /dev/modem
Baud = 38400
Init = ATX3Z
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0
Phone = 172222
Username = rfowkar
Password
Init1 = ATZ
[Dialer phone2]
Phone = 172223
[Dialer pulse]
Dial Command = ATDT
-----------------------------------------------------------------------------------------------------------------------------
Can anybody help me on this ?
Thanks in advance.
--
Rajesh(ALIAS Shriram)
----------------------------------------
Kurtarkar Nagari, Bldg-C,
Flat No. T4, Third Floor,
Shantinagar(Santacruz), Ponda-Goa-403401
Ph. : (0832)315932
Email : [EMAIL PROTECTED]
----------------------------------------
--------------------------------------------------------------------
The Linux India Mailing List Archives are now available. Please search
the archive at http://lists.linux-india.org/ before posting your question
to avoid repetition and save bandwidth.
