Hello
I had edited /etc/smb.conf file and restarted smb, my NT
workstaions can'nt see the Linux machine through the network neighbourhood,
while i can pine and telnet, now i don'nt know where I had gone wrong , I am
adding contents of smb.conf files
Thanks in advance
Joseph John
[global]
workgroup = ORB
guest account = guest
keep alive = 30
os level = 2
domain logons = yes
domain master = yes
encrypt passwords = yes
security = user
; printing = bsd
; printcap name = /etc/printcap
; load printers = yes
hosts allow = 192.168.0.
networkstation user login = yes
smb passwd file = /etc/smbpasswd
; Please uncomment the following entry and replace the
; ip number and netmask with the correct numbers for
; your ethernet interface.
; interfaces = 192.168.1.1/255.255.255.0
interfaces = 192.168.0.1/255.255.255.0
; If you want Samba to act as a wins server, please set
; 'wins support = yes'
wins support = no
; If you want Samba to use an existing wins server,
; please uncomment the following line and replace
; the dummy with the wins server's ip number.
; wins server = 192.168.1.1
[homes]
comment = Homes
browseable = yes
read only = no
create mode = 0750
; The following share gives all users access to the Server's CD drive,
; assuming it is mounted under /cd. To enable this share, please remove
; the semicolons before the lines
;
[cdrom]
comment = Linux CD-ROM
path = /cdrom
read only = yes
locking = no
;[printers]
; comment = All Printers
; browseable = no
; printable = yes
; public = no
; read only = yes
; create mode = 0700
; directory = /tmp
[utils]
comment = Utils for Wincvs
path = /local/utils
read only = yes
valid users = user1 user2 user3 user4 user5 user6 user7
[
--------------------------------------------------------------------
The Linux India Mailing List Archives are now available. Please search
the archive at http://lists.linux-india.org/ before posting your question
to avoid repetition and save bandwidth.
