My clockchip is 86c365 which works fine. Maybe u could try tinkering with
the modelines a bit. It should work on a 68 too. try the foll modelines. It
may crash the system but then again it may work. Anyway XF86 docs say Trio3D
is 362.
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777
806 -hsync -vsync
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
Modeline "640x480" 45.80 640 672 768 864 480 488 494 530 -hsync -vsync
Modeline "800x600" 36 800 824 896 1024 600 601 603 625
Soumyajit Deb
IIIT Hyderabad
-----Original Message-----
From: Rohit <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Tuesday, February 29, 2000 12:30 PM
Subject: Re: [LI] Fw: Xwindows problem SiS 6326
>Soumyajit Deb wrote:
>> S3Trio3D supports 24 bpp 1024x768/1280x1024 using the XFree86 3.3.5
>> SVGA server. Thats what I use
>
>Right Soumya, the problem is that my card is 2x with 86c268 chipset.
>Closest we come to in the XFree86 database, till 3.3.5 is 265 chipset
>and it is recommended that one uses VGA16 server with that, at their
>site.
>
>And that is pathetic!
>
>By the way, to all, due to some hard coded limitation in S3 cards, you
>can
>nto achieve 32 bpp on them. 24 is the highest you get.
>
>Rohit
>
>--------------------------------------------------------------------------
>LI is all for free speech, but this list was created for a purpose --
>to help popularise Linux in India. If your messages are counterproductive
>to that purpose, your privileges to submit messages can and will be
revoked.
--------------------------------------------------------------------------
LI is all for free speech, but this list was created for a purpose --
to help popularise Linux in India. If your messages are counterproductive
to that purpose, your privileges to submit messages can and will be revoked.
