reMark Brown wrote:
> Signed-off-by: Liam Girdwood <[EMAIL PROTECTED]>
> Signed-off-by: Graeme Gregory <[EMAIL PROTECTED]>
> Signed-off-by: Mike Arthur <[EMAIL PROTECTED]>
> Signed-off-by: Mark Brown <[EMAIL PROTECTED]>
> Cc: Stanley Cai <[EMAIL PROTECTED]>
> Cc: Rodolfo Giometti <[EMAIL PROTECTED]>
> Cc: Russell King <[EMAIL PROTECTED]>
> Cc: Marc Kleine-Budde <[EMAIL PROTECTED]>
^^
it's [EMAIL PROTECTED]
> Cc: Ian Molton <[EMAIL PROTECTED]>
> Cc: Vince Sanders <[EMAIL PROTECTED]>
> Cc: Andrew Zabolotny <[EMAIL PROTECTED]>
> ---
> drivers/input/touchscreen/pxa-wm97xx.c | 298
> ++++++++++++++++++++++++++++++++
> 1 files changed, 298 insertions(+), 0 deletions(-)
> create mode 100644 drivers/input/touchscreen/pxa-wm97xx.c
>
> diff --git a/drivers/input/touchscreen/pxa-wm97xx.c
> b/drivers/input/touchscreen/pxa-wm97xx.c
> new file mode 100644
> index 0000000..870508a
> --- /dev/null
> +++ b/drivers/input/touchscreen/pxa-wm97xx.c
> @@ -0,0 +1,298 @@
> +/*
> + * pxa-wm97xx.c -- pxa-wm97xx Continuous Touch screen driver for
> + * Wolfson WM97xx AC97 Codecs.
> + *
> + * Copyright 2004 Wolfson Microelectronics PLC.
> + * Author: Liam Girdwood
> + * [EMAIL PROTECTED] or [EMAIL PROTECTED]
> + * Parts Copyright : Ian Molton <[EMAIL PROTECTED]>
> + * Andrew Zabolotny <[EMAIL PROTECTED]>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + * Notes:
> + * This is a wm97xx extended touch driver to capture touch
> + * data in a continuous manner on the Intel XScale archictecture
> + *
> + * Features:
> + * - codecs supported:- WM9705, WM9712, WM9713
> + * - processors supported:- Intel XScale PXA25x, PXA26x, PXA27x
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/version.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/delay.h>
> +#include <linux/irq.h>
> +#include <linux/interrupt.h>
> +#include <linux/wm97xx.h>
> +#include <linux/io.h>
> +#include <asm/arch/pxa-regs.h>
> +
> +#define VERSION "0.13"
> +
> +struct continuous {
> + u16 id; /* codec id */
> + u8 code; /* continuous code */
> + u8 reads; /* number of coord reads per read cycle */
> + u32 speed; /* number of coords per second */
> +};
> +
> +#define WM_READS(sp) ((sp / HZ) + 1)
> +
> +static const struct continuous cinfo[] = {
> + {WM9705_ID2, 0, WM_READS(94), 94},
> + {WM9705_ID2, 1, WM_READS(188), 188},
> + {WM9705_ID2, 2, WM_READS(375), 375},
> + {WM9705_ID2, 3, WM_READS(750), 750},
> + {WM9712_ID2, 0, WM_READS(94), 94},
> + {WM9712_ID2, 1, WM_READS(188), 188},
> + {WM9712_ID2, 2, WM_READS(375), 375},
> + {WM9712_ID2, 3, WM_READS(750), 750},
> + {WM9713_ID2, 0, WM_READS(94), 94},
> + {WM9713_ID2, 1, WM_READS(120), 120},
> + {WM9713_ID2, 2, WM_READS(154), 154},
> + {WM9713_ID2, 3, WM_READS(188), 188},
> +};
> +
> +/* continuous speed index */
> +static int sp_idx;
> +static u16 last, tries;
> +
> +/*
> + * Pen sampling frequency (Hz) in continuous mode.
> + */
> +static int cont_rate = 200;
> +module_param(cont_rate, int, 0);
> +MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)");
> +
> +/*
> + * Pen down detection.
> + *
> + * This driver can either poll or use an interrupt to indicate a pen down
> + * event. If the irq request fails then it will fall back to polling mode.
> + */
> +static int pen_int;
> +module_param(pen_int, int, 0);
> +MODULE_PARM_DESC(pen_int, "Pen down detection (1 = interrupt, 0 = polling)");
> +
> +/*
> + * Pressure readback.
> + *
> + * Set to 1 to read back pen down pressure
> + */
> +static int pressure;
> +module_param(pressure, int, 0);
> +MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no
> pressure)");
> +
> +/*
> + * AC97 touch data slot.
> + *
> + * Touch screen readback data ac97 slot
> + */
> +static int ac97_touch_slot = 5;
> +module_param(ac97_touch_slot, int, 0);
> +MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number");
> +
> +
> +/* flush AC97 slot 5 FIFO on pxa machines */
> +#ifdef CONFIG_PXA27x
> +static void wm97xx_acc_pen_up(struct wm97xx *wm)
> +{
> + set_current_state(TASK_INTERRUPTIBLE);
> + schedule_timeout(1);
> +
> + while (MISR & (1 << 2))
> + MODR;
> +}
> +#else
> +static void wm97xx_acc_pen_up(struct wm97xx *wm)
> +{
> + int count = 16;
> + set_current_state(TASK_INTERRUPTIBLE);
> + schedule_timeout(1);
> +
> + while (count < 16) {
> + MODR;
> + count--;
> + }
> +}
> +#endif
> +
> +static int wm97xx_acc_pen_down(struct wm97xx *wm)
> +{
> + u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES;
> + int reads = 0;
> +
> + /* data is never immediately available after pen down irq */
> + set_current_state(TASK_INTERRUPTIBLE);
> + schedule_timeout(1);
> +
> + if (tries > 5) {
> + tries = 0;
> + return RC_PENUP;
> + }
> +
> + x = MODR;
> + if (x == last) {
> + tries++;
> + return RC_AGAIN;
> + }
> + last = x;
> + do {
> + if (reads)
> + x = MODR;
> + y = MODR;
> + if (pressure)
> + p = MODR;
> +
> + /* are samples valid */
> + if ((x & 0x7000) != WM97XX_ADCSEL_X ||
> + (y & 0x7000) != WM97XX_ADCSEL_Y ||
> + (p & 0x7000) != WM97XX_ADCSEL_PRES)
> + goto up;
> +
> + /* coordinate is good */
> + tries = 0;
> + input_report_abs(wm->input_dev, ABS_X, x & 0xfff);
> + input_report_abs(wm->input_dev, ABS_Y, y & 0xfff);
> + input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff);
> + input_sync(wm->input_dev);
> + reads++;
> + } while (reads < cinfo[sp_idx].reads);
> +up:
> + return RC_PENDOWN | RC_AGAIN;
> +}
> +
> +static int wm97xx_acc_startup(struct wm97xx *wm)
> +{
> + int idx = 0;
> +
> + /* check we have a codec */
> + if (wm->ac97 == NULL)
> + return -ENODEV;
> +
> + /* Go you big red fire engine */
> + for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) {
> + if (wm->id != cinfo[idx].id)
> + continue;
> + sp_idx = idx;
> + if (cont_rate <= cinfo[idx].speed)
> + break;
> + }
> + wm->acc_rate = cinfo[sp_idx].code;
> + wm->acc_slot = ac97_touch_slot;
> + dev_info(wm->dev,
> + "pxa2xx accelerated touchscreen driver, %d samples/sec\n",
> + cinfo[sp_idx].speed);
> +
> + /* codec specific irq config */
> + if (pen_int) {
> + switch (wm->id) {
> + case WM9705_ID2:
> + wm->pen_irq = IRQ_GPIO(4);
> + set_irq_type(IRQ_GPIO(4), IRQT_BOTHEDGE);
> + break;
> + case WM9712_ID2:
> + case WM9713_ID2:
> + /* enable pen down interrupt */
> + /* use PEN_DOWN GPIO 13 to assert IRQ on GPIO line 2 */
> + wm->pen_irq = MAINSTONE_AC97_IRQ;
I'm missing some kind of abstraction here, what about non mainstone
boards with the pen irq wired to some other gpio?
> + wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
> + WM97XX_GPIO_POL_HIGH,
> + WM97XX_GPIO_STICKY,
> + WM97XX_GPIO_WAKE);
> + wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT,
> + WM97XX_GPIO_POL_HIGH,
> + WM97XX_GPIO_NOTSTICKY,
> + WM97XX_GPIO_NOWAKE);
> + break;
> + default:
> + dev_err(wm->dev,
> + "pen down irq not supported on this device\n");
> + pen_int = 0;
> + break;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static void wm97xx_acc_shutdown(struct wm97xx *wm)
> +{
> + /* codec specific deconfig */
> + if (pen_int) {
> + switch (wm->id & 0xffff) {
> + case WM9705_ID2:
> + wm->pen_irq = 0;
> + break;
> + case WM9712_ID2:
> + case WM9713_ID2:
> + /* disable interrupt */
> + wm->pen_irq = 0;
> + break;
> + }
> + }
> +}
> +
> +static void wm97xx_irq_enable(struct wm97xx *wm, int enable)
> +{
> + if (enable)
> + enable_irq(wm->pen_irq);
> + else
> + disable_irq(wm->pen_irq);
> +}
> +
> +static struct wm97xx_mach_ops pxa_mach_ops = {
> + .acc_enabled = 1,
> + .acc_pen_up = wm97xx_acc_pen_up,
> + .acc_pen_down = wm97xx_acc_pen_down,
> + .acc_startup = wm97xx_acc_startup,
> + .acc_shutdown = wm97xx_acc_shutdown,
> + .irq_enable = wm97xx_irq_enable,
> +};
> +
> +static int pxa_wm97xx_probe(struct device *dev)
> +{
> + struct wm97xx *wm = dev->driver_data;
> + return wm97xx_register_mach_ops(wm, &pxa_mach_ops);
> +}
> +
> +static int pxa_wm97xx_remove(struct device *dev)
> +{
> + struct wm97xx *wm = dev->driver_data;
> + wm97xx_unregister_mach_ops(wm);
> + return 0;
> +}
> +
> +static struct device_driver pxa_wm97xx_driver = {
> + .name = "wm97xx-touchscreen",
> + .bus = &wm97xx_bus_type,
> + .owner = THIS_MODULE,
> + .probe = pxa_wm97xx_probe,
> + .remove = pxa_wm97xx_remove
> +};
> +
> +static int __init pxa_wm97xx_init(void)
> +{
> + return driver_register(&pxa_wm97xx_driver);
> +}
> +
> +static void __exit pxa_wm97xx_exit(void)
> +{
> + driver_unregister(&pxa_wm97xx_driver);
> +}
> +
> +module_init(pxa_wm97xx_init);
> +module_exit(pxa_wm97xx_exit);
> +
> +/* Module information */
> +MODULE_AUTHOR("Liam Girdwood <[EMAIL PROTECTED]>");
> +MODULE_DESCRIPTION("wm97xx continuous touch driver for pxa2xx");
> +MODULE_LICENSE("GPL");
regards - Marc
--
Marc Kleine-Budde Phone: +49-231-2826-924
Pengutronix - Linux Solutions for Science and Industry
Vertretung West/Dortmund http://www.pengutronix.de
signature.asc
Description: OpenPGP digital signature
