V4: add of_match_table in the driver, and change egalax_ts gpio irq type value from 2 to 8 (falling edge to low level) in the dts.
V3: Although have got Ack-by from driver author in the V2, i have to send V3 since the driver is changed due to the change of a property name in the dts. As Shawn.guo suggested, i renamed property "irq-gpio" to "wakeup-gpios". The reason is that, firstly the idiom of gpio naming in DT is *-gpios, even though most of time, it could be just one gpio, secondly as the pin is accessed as a gpio only in egalax_wake_up_device for waking up the device. This time i send the patches both to linux-input and linux-arm, 0001 and 0002 belongs to linux-input, while the 0003 belongs to linux-arm. V2: Add return value checking for waking up the controller in the probe function. V1: eeti touch screen controller is an external chip for most platforms, it connect to CPU via i2c bus, and it has a irq request pin need to be connected to a gpio of the CPU, this irq request pin also act as a wake up signal for touch screen controller, we need to get this gpio number and operate it to wake up the controller, the old way to get gpio is irq_to_gpio(), this API is dying and most platforms don't support it, we change it to a more generic way to use devcietree. Hui Wang (3): Input: egalax_ts: get gpio from devicetree node Input: add devicetree binding note for egalax_ts ARM: dts: imx6q-sabrelite: add eeti egalax touchscreen .../bindings/input/touchscreen/egalax-ts.txt | 19 +++++++++++++++ arch/arm/boot/dts/imx6q-sabrelite.dts | 16 ++++++++++++ arch/arm/boot/dts/imx6q.dtsi | 7 +++++ drivers/input/touchscreen/egalax_ts.c | 25 +++++++++++++++++-- 4 files changed, 64 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt -- 1.7.6 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html