Hi Benjamin, thanks for looking into the issue.
Am Dienstag, 20. November 2012, 13:47:23 schrieben Sie: > Hi Jan-Matthias, > > On Mon, Nov 19, 2012 at 12:58 PM, Jan-Matthias Braun <[email protected]> > wrote: > > Dear List, > > > > using the current (Linux v2.6.7) hid-multitouch driver I have the problem, > > that the touchscreen works fine after a fresh boot, but after a suspend the > > touchscreen does not come back to live and I am asking for assistance to > > get this working. As I can reproduce this problem on a standard tty device > > without X (see below) I am suspecting a driver problem, but I might as well > > be wrong. > > I assume you are talking about v3.6.7... You are right, of course. Sorry for the distraction. > > The device in question is the Touchscreen of a Dell Inspron Duo > > convertable, a USB device with id 0eef:725e (D-WAV Scientific Co., Ltd), > > found and registered as an input device by the kernel as > > [ 6.931638] usb 4-1: Manufacturer: eGalax Inc. > > [ 16.186272] input: eGalax Inc. USB TouchController as > > /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input10 > > [ 16.187162] hid-multitouch 0003:0EEF:725E.0001: input,hiddev0,hidraw0: > > USB HID v2.10 Pointer > > [eGalax Inc. USB TouchController] on > > usb-0000:00:1d.2-1/input0 > > > > I have tested the behaviour with and without X11. Without X11 I was using a > > standard tty and using cat on the input device. > > After boot the input device gives lot of output while touching the screen, > > after resume the device stays silent. > > strange. I have tested the procedure with the eGalax 0x72FA I got, and > I'm not seeing this problem on a 3.6 kernel. > > Is the config symbol CONFIG_PM set to "y" in your .config file? Yes. > Also, can you try to rmmod / modprobe hid-multitouch when the device > is not responding and see if this solves things. This is not working for me. On modprobe the Kernel log says [12537.335946] input: eGalax Inc. USB TouchController as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input /input13 [12537.336875] hid-multitouch 0003:0EEF:725E.0001: input,hiddev0,hidraw0: USB HID v2.10 Pointer [eGalax Inc. USB TouchController] on usb-0000:00:1d.2-1/input0 but /dev/input/event13 is not created. To be honest, I don't even know, if it should be created. What happens is, that /dev/input/event10 vanishes on removal of the hid-multitouch module and then reappears after modprobe. But a cat on it wont show a reaction while touching the screen's surface. > > I have this problem since moving to hid-multitouch for handling this device. > > What kind of driver did you use before? I think, there was a separate usb touchscreen driver for egalax devices before something like kernel version 3.2. This one I used. Long story short: I have never used the vendor supplied drivers, but those coming with the kernel. Cheers, Jan > > I will be happy to test and supply more information. Thanks a lot for > > looking into this, > > > > Jan-Matthias Braun > > > > PS: As I am not subscribed to the mailing list, please CC me. -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
