Yes, I could add CONFIG_MOUSE_PS2_SYNAPTICS for the change as we only need it for synaptics touchpad/touchpoint on lenovo's machines.
On Mon, Feb 18, 2013 at 5:26 PM, li guang <lig.f...@cn.fujitsu.com> wrote: > seems a special change for a special device > so, you may need to place this change with > corresponding CONFIG_xxx_xxx. > generally, if command F2 failed, we will assume > there's no ps2 device, it's normal, > or do you have some materials(SPEC) to specify > the change you have made? > > > > 在 2012-10-31三的 18:11 +0800,Chung-yih Wang写道: >> As the synaptics device may not respond to the first command in psmouse_probe >> when a machine is booting up, the patch gives a second probe if the first >> one fails. >> >> Signed-off-by: Chung-yih Wang <cyw...@chromium.org> >> --- >> drivers/input/mouse/psmouse-base.c | 13 +++++++++++-- >> 1 files changed, 11 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/input/mouse/psmouse-base.c >> b/drivers/input/mouse/psmouse-base.c >> index 22fe254..c4fc5ad 100644 >> --- a/drivers/input/mouse/psmouse-base.c >> +++ b/drivers/input/mouse/psmouse-base.c >> @@ -1053,8 +1053,17 @@ static int psmouse_probe(struct psmouse *psmouse) >> */ >> >> param[0] = 0xa5; >> - if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETID)) >> - return -1; >> + if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETID)) { >> + /* >> + * Reprobe the device if it did not respond to the GETID >> + * command. Before retry, additional dummy command is sent >> + * to clear the 'RESEND' response if exists. >> + */ >> + psmouse_warn(psmouse, "GETID probe failed, retrying...\n"); >> + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11); >> + if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETID)) >> + return -1; >> + } >> >> if (param[0] != 0x00 && param[0] != 0x03 && >> param[0] != 0x04 && param[0] != 0xff) > > -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html