On Tue, Oct 22, 2013 at 08:08:12AM +0200, Florian Echtler wrote:
> Hello Dmitry,
>
> thanks for your quick feedback, a few questions below:
>
> On 21.10.2013 18:20, Dmitry Torokhov wrote:
> > On Sun, Oct 20, 2013 at 06:49:11PM +0200, Florian Echtler wrote:
> >> +/* read 512 bytes from endpoint 0x86 -> get header + blobs */
> >> +struct sur40_header {
> >> +
> >> + uint16_t type; /* always 0x0001 */
> >> + uint16_t count; /* count of blobs (if 0: continue prev. packet) */
> >> +
> >> + uint32_t packet_id;
> >> +
> >> + uint32_t timestamp; /* milliseconds (inc. by 16 or 17 each frame) */
> >> + uint32_t unknown; /* "epoch?" always 02/03 00 00 00 */
> >
> > Proper internal kernel types are u8, u16, u32. For user-facing APIs
> > __u8, __u16, and __u32 should be used. Also, since this is data coming
> > directly off the wire, you should be using __le16, __le32, etc, and then
> > do __leXX_to_cpu() conversion before using it in calculations.
> OK, I'll switch to u32 throughout (also for the float, I'll explain in a
> commment). However, I haven't found a single other touchscreen driver
> which uses __le32, even though they all probably process raw wire data -
> can you suggest an example?
Not necessarily le32, but:
[dtor@dtor-d630 work]$ grep -ri to_cpu drivers/input/touchscreen/
drivers/input/touchscreen/atmel_mxt_ts.c:
le16_to_cpus(&object->start_address);
drivers/input/touchscreen/atmel_mxt_ts.c: le16_to_cpus(range.x);
drivers/input/touchscreen/atmel_mxt_ts.c: le16_to_cpus(range.y);
drivers/input/touchscreen/cyttsp_core.c: input_report_abs(input,
ABS_MT_POSITION_X, be16_to_cpu(tch->x));
drivers/input/touchscreen/cyttsp_core.c: input_report_abs(input,
ABS_MT_POSITION_Y, be16_to_cpu(tch->y));
drivers/input/touchscreen/ads7846.c: status =
be16_to_cpu(req->sample);
drivers/input/touchscreen/ads7846.c: status = be16_to_cpu(*((u16
*)&req->sample[1]));
drivers/input/touchscreen/ads7846.c: return be16_to_cpup((__be16
*)&(((char*)t->rx_buf)[1])) >> 3;
drivers/input/touchscreen/ads7846.c: return be16_to_cpup((__be16
*)t->rx_buf) >> 3;
drivers/input/touchscreen/usbtouchscreen.c: unsigned int data_len =
be16_to_cpu(packet->data_len);
drivers/input/touchscreen/usbtouchscreen.c: unsigned int x_len =
be16_to_cpu(packet->x_len);
drivers/input/touchscreen/usbtouchscreen.c: unsigned int y_len =
be16_to_cpu(packet->y_len);
drivers/input/touchscreen/usbtouchscreen.c:
le16_to_cpu(udev->descriptor.idVendor),
drivers/input/touchscreen/usbtouchscreen.c:
le16_to_cpu(udev->descriptor.idProduct));
drivers/input/touchscreen/wacom_i2c.c: x = le16_to_cpup((__le16 *)&data[4]);
drivers/input/touchscreen/wacom_i2c.c: y = le16_to_cpup((__le16 *)&data[6]);
drivers/input/touchscreen/wacom_i2c.c: pressure = le16_to_cpup((__le16
*)&data[8]);
>
> >> +/* debug helper macro */
> >> +#define get_dev(x) (&(x->usbdev->dev))
> > Just stick that dev in sur40_state and then use sur40->dev throughout.
> OK.
>
> >> + struct sur40_header *header = &(sur40->bulk_in_buffer->header);
> > No need to have parenthesis around & operator.
> >> + struct sur40_blob *inblob = &(sur40->bulk_in_buffer->blobs[0]);
> > Same here.
> Intention seems clearer to me with parentheses, but if this doesn't
> conform to coding style, I'll fix it.
>
> >> + if (!sur40->bulk_in_buffer) {
> >> + dev_err(&interface->dev, "Unable to allocate input buffer.");
> >> + sur40_delete(sur40);
> > Would prefer standard kernel error unwinding style (gotos to proper
> > unwinding point).
> Something like this example from ucb1400_ts?
>
> error = input_register_device(ucb->ts_idev);
> if (error)
> goto err_free_irq;
>
> return 0;
>
> err_free_irq:
> free_irq(ucb->irq, ucb);
> err_free_devs:
> input_free_device(ucb->ts_idev);
> err:
> return error;
>
Yes, please.
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
