Hi,
On 03/13/2014 03:03 AM, Chanwoo Choi wrote:
> Hi Robert,
>
> On 03/12/2014 10:37 PM, Robert Baldyga wrote:
>> This patch modifies mfd driver to use regmap for handling interrupts.
>> It allows to simplify irq handling process. This modifications needed
>> to make small changes in function drivers, which use interrupts.
>>
>> Signed-off-by: Robert Baldyga <r.bald...@samsung.com>
>> ---
>> drivers/extcon/extcon-max8997.c | 35 ++--
>> drivers/mfd/Kconfig | 2 +-
>> drivers/mfd/Makefile | 2 +-
>> drivers/mfd/max8997-irq.c | 373
>> -----------------------------------
>> drivers/mfd/max8997.c | 113 ++++++++++-
>> drivers/rtc/rtc-max8997.c | 2 +-
>> include/linux/mfd/max8997-private.h | 65 +++++-
>> 7 files changed, 183 insertions(+), 409 deletions(-)
>> delete mode 100644 drivers/mfd/max8997-irq.c
>>
>> diff --git a/drivers/extcon/extcon-max8997.c
>> b/drivers/extcon/extcon-max8997.c
>> index f258c08..15fc5c0 100644
>> --- a/drivers/extcon/extcon-max8997.c
>> +++ b/drivers/extcon/extcon-max8997.c
>> @@ -46,15 +46,15 @@ struct max8997_muic_irq {
>> };
>>
>> static struct max8997_muic_irq muic_irqs[] = {
>> - { MAX8997_MUICIRQ_ADCError, "muic-ADCERROR" },
>> - { MAX8997_MUICIRQ_ADCLow, "muic-ADCLOW" },
>> - { MAX8997_MUICIRQ_ADC, "muic-ADC" },
>> - { MAX8997_MUICIRQ_VBVolt, "muic-VBVOLT" },
>> - { MAX8997_MUICIRQ_DBChg, "muic-DBCHG" },
>> - { MAX8997_MUICIRQ_DCDTmr, "muic-DCDTMR" },
>> - { MAX8997_MUICIRQ_ChgDetRun, "muic-CHGDETRUN" },
>> - { MAX8997_MUICIRQ_ChgTyp, "muic-CHGTYP" },
>> - { MAX8997_MUICIRQ_OVP, "muic-OVP" },
>> + { MAX8997_MUICIRQ_ADCERROR, "MUIC-ADCERROR" },
>> + { MAX8997_MUICIRQ_ADCLOW, "MUIC-ADCLOW" },
>> + { MAX8997_MUICIRQ_ADC, "MUIC-ADC" },
>> + { MAX8997_MUICIRQ_VBVOLT, "MUIC-VBVOLT" },
>> + { MAX8997_MUICIRQ_DBCHG, "MUIC-DBCHG" },
>> + { MAX8997_MUICIRQ_DCDTMR, "MUIC-DCDTMR" },
>> + { MAX8997_MUICIRQ_CHGDETRUN, "MUIC-CHGDETRUN" },
>> + { MAX8997_MUICIRQ_CHGTYP, "MUIC-CHGTYP" },
>> + { MAX8997_MUICIRQ_OVP, "MUIC-OVP" },
>> };
>
>
> Why did you modify interrput name? Did you have some reason?
> I think this modification don't need it.
I did it to have one naming convention in max8997-private.h file. Any
other interrupt names uses upper case, but MUIC iqr's from some reason
uses CamelCase. I think it's much better to have consistent style in
entire file.
>
>>
>> /* Define supported cable type */
>> @@ -553,17 +553,17 @@ static void max8997_muic_irq_work(struct work_struct
>> *work)
>> }
>>
>> switch (irq_type) {
>> - case MAX8997_MUICIRQ_ADCError:
>> - case MAX8997_MUICIRQ_ADCLow:
>> + case MAX8997_MUICIRQ_ADCERROR:
>> + case MAX8997_MUICIRQ_ADCLOW:
>> case MAX8997_MUICIRQ_ADC:
>> /* Handle all of cable except for charger cable */
>> ret = max8997_muic_adc_handler(info);
>> break;
>> - case MAX8997_MUICIRQ_VBVolt:
>> - case MAX8997_MUICIRQ_DBChg:
>> - case MAX8997_MUICIRQ_DCDTmr:
>> - case MAX8997_MUICIRQ_ChgDetRun:
>> - case MAX8997_MUICIRQ_ChgTyp:
>> + case MAX8997_MUICIRQ_VBVOLT:
>> + case MAX8997_MUICIRQ_DBCHG:
>> + case MAX8997_MUICIRQ_DCDTMR:
>> + case MAX8997_MUICIRQ_CHGDETRUN:
>> + case MAX8997_MUICIRQ_CHGTYP:
>
> I don't agree the modification of MUIC itnerrput.
>
>> /* Handle charger cable */
>> ret = max8997_muic_chg_handler(info);
>> break;
>> @@ -679,7 +679,8 @@ static int max8997_muic_probe(struct platform_device
>> *pdev)
>> struct max8997_muic_irq *muic_irq = &muic_irqs[i];
>> unsigned int virq = 0;
>>
>> - virq = irq_create_mapping(max8997->irq_domain, muic_irq->irq);
>> + virq = regmap_irq_get_virq(max8997->irq_data_muic,
>> + muic_irq->irq);
>> if (!virq) {
>> ret = -EINVAL;
>> goto err_irq;
>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> index 2871a65..2273574 100644
>> --- a/drivers/mfd/Kconfig
>> +++ b/drivers/mfd/Kconfig
>> @@ -388,7 +388,7 @@ config MFD_MAX8997
>> depends on I2C=y
>> select MFD_CORE
>> select REGMAP_I2C
>> - select IRQ_DOMAIN
>> + select REGMAP_IRQ
>> help
>> Say yes here to add support for Maxim Semiconductor MAX8997/8966.
>> This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
>> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
>> index f5a7b2c..4cec8ad 100644
>> --- a/drivers/mfd/Makefile
>> +++ b/drivers/mfd/Makefile
>> @@ -119,7 +119,7 @@ obj-$(CONFIG_MFD_MAX77693) += max77693.o
>> max77693-irq.o
>> obj-$(CONFIG_MFD_MAX8907) += max8907.o
>> max8925-objs := max8925-core.o max8925-i2c.o
>> obj-$(CONFIG_MFD_MAX8925) += max8925.o
>> -obj-$(CONFIG_MFD_MAX8997) += max8997.o max8997-irq.o
>> +obj-$(CONFIG_MFD_MAX8997) += max8997.o
>> obj-$(CONFIG_MFD_MAX8998) += max8998.o max8998-irq.o
>>
>> pcf50633-objs := pcf50633-core.o pcf50633-irq.o
>> diff --git a/drivers/mfd/max8997-irq.c b/drivers/mfd/max8997-irq.c
>> deleted file mode 100644
>> index 0e7ff39..0000000
>> --- a/drivers/mfd/max8997-irq.c
>> +++ /dev/null
>> @@ -1,373 +0,0 @@
>> -/*
>> - * max8997-irq.c - Interrupt controller support for MAX8997
>> - *
>> - * Copyright (C) 2011 Samsung Electronics Co.Ltd
>> - * MyungJoo Ham <myungjoo....@samsung.com>
>> - *
>> - * This program is free software; you can redistribute it and/or modify
>> - * it under the terms of the GNU General Public License as published by
>> - * the Free Software Foundation; either version 2 of the License, or
>> - * (at your option) any later version.
>> - *
>> - * This program is distributed in the hope that it will be useful,
>> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> - * GNU General Public License for more details.
>> - *
>> - * You should have received a copy of the GNU General Public License
>> - * along with this program; if not, write to the Free Software
>> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
>> - *
>> - * This driver is based on max8998-irq.c
>> - */
>> -
>> -#include <linux/err.h>
>> -#include <linux/irq.h>
>> -#include <linux/interrupt.h>
>> -#include <linux/mfd/max8997.h>
>> -#include <linux/mfd/max8997-private.h>
>> -#include <linux/regmap.h>
>> -
>> -static const u8 max8997_mask_reg[] = {
>> - [PMIC_INT1] = MAX8997_REG_INT1MSK,
>> - [PMIC_INT2] = MAX8997_REG_INT2MSK,
>> - [PMIC_INT3] = MAX8997_REG_INT3MSK,
>> - [PMIC_INT4] = MAX8997_REG_INT4MSK,
>> - [FUEL_GAUGE] = MAX8997_REG_INVALID,
>> - [MUIC_INT1] = MAX8997_MUIC_REG_INTMASK1,
>> - [MUIC_INT2] = MAX8997_MUIC_REG_INTMASK2,
>> - [MUIC_INT3] = MAX8997_MUIC_REG_INTMASK3,
>> - [GPIO_LOW] = MAX8997_REG_INVALID,
>> - [GPIO_HI] = MAX8997_REG_INVALID,
>> - [FLASH_STATUS] = MAX8997_REG_INVALID,
>> -};
>> -
>> -struct max8997_irq_data {
>> - int mask;
>> - enum max8997_irq_source group;
>> -};
>> -
>> -#define DECLARE_IRQ(idx, _group, _mask) \
>> - [(idx)] = { .group = (_group), .mask = (_mask) }
>> -static const struct max8997_irq_data max8997_irqs[] = {
>> - DECLARE_IRQ(MAX8997_PMICIRQ_PWRONR, PMIC_INT1, 1 << 0),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_PWRONF, PMIC_INT1, 1 << 1),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_PWRON1SEC, PMIC_INT1, 1 << 3),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_JIGONR, PMIC_INT1, 1 << 4),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_JIGONF, PMIC_INT1, 1 << 5),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_LOWBAT2, PMIC_INT1, 1 << 6),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_LOWBAT1, PMIC_INT1, 1 << 7),
>> -
>> - DECLARE_IRQ(MAX8997_PMICIRQ_JIGR, PMIC_INT2, 1 << 0),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_JIGF, PMIC_INT2, 1 << 1),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_MR, PMIC_INT2, 1 << 2),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_DVS1OK, PMIC_INT2, 1 << 3),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_DVS2OK, PMIC_INT2, 1 << 4),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_DVS3OK, PMIC_INT2, 1 << 5),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_DVS4OK, PMIC_INT2, 1 << 6),
>> -
>> - DECLARE_IRQ(MAX8997_PMICIRQ_CHGINS, PMIC_INT3, 1 << 0),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_CHGRM, PMIC_INT3, 1 << 1),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_DCINOVP, PMIC_INT3, 1 << 2),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_TOPOFFR, PMIC_INT3, 1 << 3),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_CHGRSTF, PMIC_INT3, 1 << 5),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_MBCHGTMEXPD, PMIC_INT3, 1 << 7),
>> -
>> - DECLARE_IRQ(MAX8997_PMICIRQ_RTC60S, PMIC_INT4, 1 << 0),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_RTCA1, PMIC_INT4, 1 << 1),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_RTCA2, PMIC_INT4, 1 << 2),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_SMPL_INT, PMIC_INT4, 1 << 3),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_RTC1S, PMIC_INT4, 1 << 4),
>> - DECLARE_IRQ(MAX8997_PMICIRQ_WTSR, PMIC_INT4, 1 << 5),
>> -
>> - DECLARE_IRQ(MAX8997_MUICIRQ_ADCError, MUIC_INT1, 1 << 2),
>> - DECLARE_IRQ(MAX8997_MUICIRQ_ADCLow, MUIC_INT1, 1 << 1),
>> - DECLARE_IRQ(MAX8997_MUICIRQ_ADC, MUIC_INT1, 1 << 0),
>> -
>> - DECLARE_IRQ(MAX8997_MUICIRQ_VBVolt, MUIC_INT2, 1 << 4),
>> - DECLARE_IRQ(MAX8997_MUICIRQ_DBChg, MUIC_INT2, 1 << 3),
>> - DECLARE_IRQ(MAX8997_MUICIRQ_DCDTmr, MUIC_INT2, 1 << 2),
>> - DECLARE_IRQ(MAX8997_MUICIRQ_ChgDetRun, MUIC_INT2, 1 << 1),
>> - DECLARE_IRQ(MAX8997_MUICIRQ_ChgTyp, MUIC_INT2, 1 << 0),
>> -
>> - DECLARE_IRQ(MAX8997_MUICIRQ_OVP, MUIC_INT3, 1 << 2),
>> -};
>> -
>> -static void max8997_irq_lock(struct irq_data *data)
>> -{
>> - struct max8997_dev *max8997 = irq_get_chip_data(data->irq);
>> -
>> - mutex_lock(&max8997->irqlock);
>> -}
>> -
>> -static void max8997_irq_sync_unlock(struct irq_data *data)
>> -{
>> - struct max8997_dev *max8997 = irq_get_chip_data(data->irq);
>> - int i;
>> -
>> - for (i = 0; i < MAX8997_IRQ_GROUP_NR; i++) {
>> - struct regmap *map;
>> - u8 mask_reg = max8997_mask_reg[i];
>> -
>> - if (i >= MUIC_INT1 && i <= MUIC_INT3)
>> - map = max8997->regmap_muic;
>> - else
>> - map = max8997->regmap;
>> -
>> - if (mask_reg == MAX8997_REG_INVALID ||
>> - IS_ERR_OR_NULL(map))
>> - continue;
>> - max8997->irq_masks_cache[i] = max8997->irq_masks_cur[i];
>> -
>> - regmap_write(map, max8997_mask_reg[i],
>> - max8997->irq_masks_cur[i]);
>> - }
>> -
>> - mutex_unlock(&max8997->irqlock);
>> -}
>> -
>> -static const inline struct max8997_irq_data *
>> -irq_to_max8997_irq(struct max8997_dev *max8997, int irq)
>> -{
>> - struct irq_data *data = irq_get_irq_data(irq);
>> - return &max8997_irqs[data->hwirq];
>> -}
>> -
>> -static void max8997_irq_mask(struct irq_data *data)
>> -{
>> - struct max8997_dev *max8997 = irq_get_chip_data(data->irq);
>> - const struct max8997_irq_data *irq_data = irq_to_max8997_irq(max8997,
>> - data->irq);
>> -
>> - max8997->irq_masks_cur[irq_data->group] |= irq_data->mask;
>> -}
>> -
>> -static void max8997_irq_unmask(struct irq_data *data)
>> -{
>> - struct max8997_dev *max8997 = irq_get_chip_data(data->irq);
>> - const struct max8997_irq_data *irq_data = irq_to_max8997_irq(max8997,
>> - data->irq);
>> -
>> - max8997->irq_masks_cur[irq_data->group] &= ~irq_data->mask;
>> -}
>> -
>> -static struct irq_chip max8997_irq_chip = {
>> - .name = "max8997",
>> - .irq_bus_lock = max8997_irq_lock,
>> - .irq_bus_sync_unlock = max8997_irq_sync_unlock,
>> - .irq_mask = max8997_irq_mask,
>> - .irq_unmask = max8997_irq_unmask,
>> -};
>> -
>> -#define MAX8997_IRQSRC_PMIC (1 << 1)
>> -#define MAX8997_IRQSRC_FUELGAUGE (1 << 2)
>> -#define MAX8997_IRQSRC_MUIC (1 << 3)
>> -#define MAX8997_IRQSRC_GPIO (1 << 4)
>> -#define MAX8997_IRQSRC_FLASH (1 << 5)
>> -static irqreturn_t max8997_irq_thread(int irq, void *data)
>> -{
>> - struct max8997_dev *max8997 = data;
>> - u8 irq_reg[MAX8997_IRQ_GROUP_NR] = {};
>> - unsigned int irq_src;
>> - int ret;
>> - int i, cur_irq;
>> -
>> - ret = regmap_read(max8997->regmap, MAX8997_REG_INTSRC, &irq_src);
>> - if (ret < 0) {
>> - dev_err(max8997->dev, "Failed to read interrupt source: %d\n",
>> - ret);
>> - return IRQ_NONE;
>> - }
>> -
>> - if (irq_src & MAX8997_IRQSRC_PMIC) {
>> - /* PMIC INT1 ~ INT4 */
>> - regmap_bulk_read(max8997->regmap, MAX8997_REG_INT1,
>> - &irq_reg[PMIC_INT1], 4);
>> - }
>> - if (irq_src & MAX8997_IRQSRC_FUELGAUGE) {
>> - /*
>> - * TODO: FUEL GAUGE
>> - *
>> - * This is to be supported by Max17042 driver. When
>> - * an interrupt incurs here, it should be relayed to a
>> - * Max17042 device that is connected (probably by
>> - * platform-data). However, we do not have interrupt
>> - * handling in Max17042 driver currently. The Max17042 IRQ
>> - * driver should be ready to be used as a stand-alone device and
>> - * a Max8997-dependent device. Because it is not ready in
>> - * Max17042-side and it is not too critical in operating
>> - * Max8997, we do not implement this in initial releases.
>> - */
>> - irq_reg[FUEL_GAUGE] = 0;
>> - }
>> - if (irq_src & MAX8997_IRQSRC_MUIC) {
>> - /* MUIC INT1 ~ INT3 */
>> - regmap_bulk_read(max8997->regmap_muic, MAX8997_MUIC_REG_INT1,
>> - &irq_reg[MUIC_INT1], 3);
>> - }
>> - if (irq_src & MAX8997_IRQSRC_GPIO) {
>> - /* GPIO Interrupt */
>> - u8 gpio_info[MAX8997_NUM_GPIO];
>> -
>> - irq_reg[GPIO_LOW] = 0;
>> - irq_reg[GPIO_HI] = 0;
>> -
>> - regmap_bulk_read(max8997->regmap, MAX8997_REG_GPIOCNTL1,
>> - gpio_info, MAX8997_NUM_GPIO);
>> - for (i = 0; i < MAX8997_NUM_GPIO; i++) {
>> - bool interrupt = false;
>> -
>> - switch (gpio_info[i] & MAX8997_GPIO_INT_MASK) {
>> - case MAX8997_GPIO_INT_BOTH:
>> - if (max8997->gpio_status[i] != gpio_info[i])
>> - interrupt = true;
>> - break;
>> - case MAX8997_GPIO_INT_RISE:
>> - if ((max8997->gpio_status[i] != gpio_info[i]) &&
>> - (gpio_info[i] & MAX8997_GPIO_DATA_MASK))
>> - interrupt = true;
>> - break;
>> - case MAX8997_GPIO_INT_FALL:
>> - if ((max8997->gpio_status[i] != gpio_info[i]) &&
>> - !(gpio_info[i] & MAX8997_GPIO_DATA_MASK))
>> - interrupt = true;
>> - break;
>> - default:
>> - break;
>> - }
>> -
>> - if (interrupt) {
>> - if (i < 8)
>> - irq_reg[GPIO_LOW] |= (1 << i);
>> - else
>> - irq_reg[GPIO_HI] |= (1 << (i - 8));
>> - }
>> -
>> - }
>> - }
>> - if (irq_src & MAX8997_IRQSRC_FLASH) {
>> - /* Flash Status Interrupt */
>> - unsigned int data;
>> - ret = regmap_read(max8997->regmap,
>> - MAX8997_REG_FLASHSTATUS, &data);
>> - irq_reg[FLASH_STATUS] = data;
>> - }
>> -
>> - /* Apply masking */
>> - for (i = 0; i < MAX8997_IRQ_GROUP_NR; i++)
>> - irq_reg[i] &= ~max8997->irq_masks_cur[i];
>> -
>> - /* Report */
>> - for (i = 0; i < MAX8997_IRQ_NR; i++) {
>> - if (irq_reg[max8997_irqs[i].group] & max8997_irqs[i].mask) {
>> - cur_irq = irq_find_mapping(max8997->irq_domain, i);
>> - if (cur_irq)
>> - handle_nested_irq(cur_irq);
>> - }
>> - }
>> -
>> - return IRQ_HANDLED;
>> -}
>> -
>> -int max8997_irq_resume(struct max8997_dev *max8997)
>> -{
>> - if (max8997->irq && max8997->irq_domain)
>> - max8997_irq_thread(0, max8997);
>> - return 0;
>> -}
>> -
>> -static int max8997_irq_domain_map(struct irq_domain *d, unsigned int irq,
>> - irq_hw_number_t hw)
>> -{
>> - struct max8997_dev *max8997 = d->host_data;
>> -
>> - irq_set_chip_data(irq, max8997);
>> - irq_set_chip_and_handler(irq, &max8997_irq_chip, handle_edge_irq);
>> - irq_set_nested_thread(irq, 1);
>> -#ifdef CONFIG_ARM
>> - set_irq_flags(irq, IRQF_VALID);
>> -#else
>> - irq_set_noprobe(irq);
>> -#endif
>> - return 0;
>> -}
>> -
>> -static struct irq_domain_ops max8997_irq_domain_ops = {
>> - .map = max8997_irq_domain_map,
>> -};
>> -
>> -int max8997_irq_init(struct max8997_dev *max8997)
>> -{
>> - struct irq_domain *domain;
>> - int i;
>> - int ret;
>> - unsigned int val;
>> -
>> - if (!max8997->irq) {
>> - dev_warn(max8997->dev, "No interrupt specified.\n");
>> - return 0;
>> - }
>> -
>> - mutex_init(&max8997->irqlock);
>> -
>> - /* Mask individual interrupt sources */
>> - for (i = 0; i < MAX8997_IRQ_GROUP_NR; i++) {
>> - max8997->irq_masks_cur[i] = 0xff;
>> - max8997->irq_masks_cache[i] = 0xff;
>> -
>> - if (IS_ERR_OR_NULL(max8997->regmap))
>> - continue;
>> - if (max8997_mask_reg[i] == MAX8997_REG_INVALID)
>> - continue;
>> -
>> - regmap_write(max8997->regmap, max8997_mask_reg[i], 0xff);
>> - }
>> -
>> - for (i = 0; i < MAX8997_NUM_GPIO; i++) {
>> - max8997->gpio_status[i] = (regmap_read(max8997->regmap,
>> - MAX8997_REG_GPIOCNTL1 + i,
>> - &val)
>> - & MAX8997_GPIO_DATA_MASK) ?
>> - true : false;
>> - }
>> -
>> - domain = irq_domain_add_linear(NULL, MAX8997_IRQ_NR,
>> - &max8997_irq_domain_ops, max8997);
>> - if (!domain) {
>> - dev_err(max8997->dev, "could not create irq domain\n");
>> - return -ENODEV;
>> - }
>> - max8997->irq_domain = domain;
>> -
>> - ret = request_threaded_irq(max8997->irq, NULL, max8997_irq_thread,
>> - IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
>> - "max8997-irq", max8997);
>> -
>> - if (ret) {
>> - dev_err(max8997->dev, "Failed to request IRQ %d: %d\n",
>> - max8997->irq, ret);
>> - return ret;
>> - }
>> -
>> - if (!max8997->ono)
>> - return 0;
>> -
>> - ret = request_threaded_irq(max8997->ono, NULL, max8997_irq_thread,
>> - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
>> - IRQF_ONESHOT, "max8997-ono", max8997);
>> -
>> - if (ret)
>> - dev_err(max8997->dev, "Failed to request ono-IRQ %d: %d\n",
>> - max8997->ono, ret);
>> -
>> - return 0;
>> -}
>> -
>> -void max8997_irq_exit(struct max8997_dev *max8997)
>> -{
>> - if (max8997->ono)
>> - free_irq(max8997->ono, max8997);
>> -
>> - if (max8997->irq)
>> - free_irq(max8997->irq, max8997);
>> -}
>> diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
>> index 782d7c9..26a360d 100644
>> --- a/drivers/mfd/max8997.c
>> +++ b/drivers/mfd/max8997.c
>> @@ -64,6 +64,49 @@ static const struct regmap_config max8997_regmap_config =
>> {
>> .max_register = MAX8997_REG_PMIC_END,
>> };
>>
>> +static const struct regmap_irq max8997_irqs[] = {
>> + /* PMIC_INT1 interrupts */
>> + { .reg_offset = 0, .mask = PMIC_INT1_PWRONR_MASK, },
>> + { .reg_offset = 0, .mask = PMIC_INT1_PWRONF_MASK, },
>> + { .reg_offset = 0, .mask = PMIC_INT1_PWRON1SEC_MASK, },
>> + { .reg_offset = 0, .mask = PMIC_INT1_JIGONR_MASK, },
>> + { .reg_offset = 0, .mask = PMIC_INT1_JIGONF_MASK, },
>> + { .reg_offset = 0, .mask = PMIC_INT1_LOWBAT2_MASK, },
>> + { .reg_offset = 0, .mask = PMIC_INT1_LOWBAT1_MASK, },
>> + /* PMIC_INT2 interrupts */
>> + { .reg_offset = 1, .mask = PMIC_INT2_JIGR_MASK, },
>> + { .reg_offset = 1, .mask = PMIC_INT2_JIGF_MASK, },
>> + { .reg_offset = 1, .mask = PMIC_INT2_MR_MASK, },
>> + { .reg_offset = 1, .mask = PMIC_INT2_DVS1OK_MASK, },
>> + { .reg_offset = 1, .mask = PMIC_INT2_DVS2OK_MASK, },
>> + { .reg_offset = 1, .mask = PMIC_INT2_DVS3OK_MASK, },
>> + { .reg_offset = 1, .mask = PMIC_INT2_DVS4OK_MASK, },
>> + /* PMIC_INT3 interrupts */
>> + { .reg_offset = 2, .mask = PMIC_INT3_CHGINS_MASK, },
>> + { .reg_offset = 2, .mask = PMIC_INT3_CHGRM_MASK, },
>> + { .reg_offset = 2, .mask = PMIC_INT3_DCINOVP_MASK, },
>> + { .reg_offset = 2, .mask = PMIC_INT3_TOPOFFR_MASK, },
>> + { .reg_offset = 2, .mask = PMIC_INT3_CHGRSTF_MASK, },
>> + { .reg_offset = 2, .mask = PMIC_INT3_MBCHGTMEXPD_MASK, },
>> + /* PMIC_INT4 interrupts */
>> + { .reg_offset = 3, .mask = PMIC_INT4_RTC60S_MASK, },
>> + { .reg_offset = 3, .mask = PMIC_INT4_RTCA1_MASK, },
>> + { .reg_offset = 3, .mask = PMIC_INT4_RTCA2_MASK, },
>> + { .reg_offset = 3, .mask = PMIC_INT4_SMPL_INT_MASK, },
>> + { .reg_offset = 3, .mask = PMIC_INT4_RTC1S_MASK, },
>> + { .reg_offset = 3, .mask = PMIC_INT4_WTSR_MASK, },
>> +};
>> +
>> +static const struct regmap_irq_chip max8997_irq_chip = {
>> + .name = "max8997",
>> + .status_base = MAX8997_REG_INT1,
>> + .mask_base = MAX8997_REG_INT1MSK,
>> + .mask_invert = false,
>> + .num_regs = 4,
>> + .irqs = max8997_irqs,
>> + .num_irqs = ARRAY_SIZE(max8997_irqs),
>> +};
>> +
>> static const struct regmap_config max8997_regmap_rtc_config = {
>> .reg_bits = 8,
>> .val_bits = 8,
>> @@ -82,6 +125,31 @@ static const struct regmap_config
>> max8997_regmap_muic_config = {
>> .max_register = MAX8997_MUIC_REG_END,
>> };
>>
>> +static const struct regmap_irq max8997_irqs_muic[] = {
>> + /* MUIC_INT1 interrupts */
>> + { .reg_offset = 0, .mask = MUIC_INT1_ADC_MASK, },
>> + { .reg_offset = 0, .mask = MUIC_INT1_ADCLOW_MASK, },
>> + { .reg_offset = 0, .mask = MUIC_INT1_ADCERROR_MASK, },
>> + /* MUIC_INT2 interrupts */
>> + { .reg_offset = 1, .mask = MUIC_INT2_CHGTYP_MASK, },
>> + { .reg_offset = 1, .mask = MUIC_INT2_CHGDETRUN_MASK, },
>> + { .reg_offset = 1, .mask = MUIC_INT2_DCDTMR_MASK, },
>> + { .reg_offset = 1, .mask = MUIC_INT2_DBCHG_MASK, },
>> + { .reg_offset = 1, .mask = MUIC_INT2_VBVOLT_MASK, },
>> + /* MUIC_INT3 interrupts */
>> + { .reg_offset = 2, .mask = MUIC_INT3_OVP_MASK, },
>> +};
>> +
>> +static const struct regmap_irq_chip max8997_irq_chip_muic = {
>> + .name = "max8997-muic",
>> + .status_base = MAX8997_MUIC_REG_INT1,
>> + .mask_base = MAX8997_MUIC_REG_INTMASK1,
>> + .mask_invert = true,
>> + .num_regs = 3,
>> + .irqs = max8997_irqs_muic,
>> + .num_irqs = ARRAY_SIZE(max8997_irqs_muic),
>> +};
>> +
>> /*
>> * Only the common platform data elements for max8997 are parsed here from
>> the
>> * device tree. Other sub-modules of max8997 such as pmic, rtc and others
>> have
>> @@ -214,9 +282,26 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
>> goto err_regmap;
>> }
>>
>> - pm_runtime_set_active(max8997->dev);
>> + ret = regmap_add_irq_chip(max8997->regmap, max8997->irq,
>> + IRQF_ONESHOT | IRQF_SHARED |
>> + IRQF_TRIGGER_FALLING, 0,
>> + &max8997_irq_chip, &max8997->irq_data);
>> + if (ret) {
>> + dev_err(max8997->dev, "failed to add irq chip: %d\n", ret);
>> + goto err_irq;
>> + }
>>
>> - max8997_irq_init(max8997);
>> + ret = regmap_add_irq_chip(max8997->regmap_muic, max8997->irq,
>> + IRQF_ONESHOT | IRQF_SHARED |
>> + IRQF_TRIGGER_FALLING, 0,
>> + &max8997_irq_chip_muic,
>> + &max8997->irq_data_muic);
>> + if (ret) {
>> + dev_err(max8997->dev, "failed to add irq chip: %d\n", ret);
>> + goto err_irq_muic;
>> + }
>> +
>> + pm_runtime_set_active(max8997->dev);
>>
>> ret = mfd_add_devices(max8997->dev, -1, max8997_devs,
>> ARRAY_SIZE(max8997_devs),
>> @@ -238,6 +323,10 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
>>
>> err_mfd:
>> mfd_remove_devices(max8997->dev);
>> +err_irq_muic:
>> + regmap_del_irq_chip(max8997->irq, max8997->irq_data_muic);
>> +err_irq:
>> + regmap_del_irq_chip(max8997->irq, max8997->irq_data);
>> err_regmap:
>> i2c_unregister_device(max8997->muic);
>> err_i2c_muic:
>> @@ -252,6 +341,10 @@ static int max8997_i2c_remove(struct i2c_client *i2c)
>> struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
>>
>> mfd_remove_devices(max8997->dev);
>> +
>> + regmap_del_irq_chip(max8997->irq, max8997->irq_data_muic);
>> + regmap_del_irq_chip(max8997->irq, max8997->irq_data);
>> +
>> i2c_unregister_device(max8997->muic);
>> i2c_unregister_device(max8997->haptic);
>> i2c_unregister_device(max8997->rtc);
>> @@ -468,8 +561,11 @@ static int max8997_suspend(struct device *dev)
>> struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
>> struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
>>
>> - if (device_may_wakeup(dev))
>> - irq_set_irq_wake(max8997->irq, 1);
>> + if (device_may_wakeup(dev)) {
>> + enable_irq_wake(max8997->irq);
>> + disable_irq(max8997->irq);
>> + }
>> +
>> return 0;
>> }
>>
>> @@ -478,9 +574,12 @@ static int max8997_resume(struct device *dev)
>> struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
>> struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
>>
>> - if (device_may_wakeup(dev))
>> - irq_set_irq_wake(max8997->irq, 0);
>> - return max8997_irq_resume(max8997);
>> + if (device_may_wakeup(dev)) {
>> + disable_irq_wake(max8997->irq);
>> + enable_irq(max8997->irq);
>> + }
>> +
>> + return 0;
>> }
>>
>> static const struct dev_pm_ops max8997_pm = {
>> diff --git a/drivers/rtc/rtc-max8997.c b/drivers/rtc/rtc-max8997.c
>> index b866f7d5..22769ea 100644
>> --- a/drivers/rtc/rtc-max8997.c
>> +++ b/drivers/rtc/rtc-max8997.c
>> @@ -494,7 +494,7 @@ static int max8997_rtc_probe(struct platform_device
>> *pdev)
>> return ret;
>> }
>>
>> - virq = irq_create_mapping(max8997->irq_domain, MAX8997_PMICIRQ_RTCA1);
>> + virq = regmap_irq_get_virq(max8997->irq_data, MAX8997_PMICIRQ_RTCA1);
>> if (!virq) {
>> dev_err(&pdev->dev, "Failed to create mapping alarm IRQ\n");
>> ret = -ENXIO;
>> diff --git a/include/linux/mfd/max8997-private.h
>> b/include/linux/mfd/max8997-private.h
>> index ea80ef8..2817fa6 100644
>> --- a/include/linux/mfd/max8997-private.h
>> +++ b/include/linux/mfd/max8997-private.h
>> @@ -333,6 +333,48 @@ enum max8997_irq_source {
>> MAX8997_IRQ_GROUP_NR,
>> };
>>
>> +#define PMIC_INT1_PWRONR_MASK (0x1 << 0)
>> +#define PMIC_INT1_PWRONF_MASK (0x1 << 1)
>> +#define PMIC_INT1_PWRON1SEC_MASK (0x1 << 3)
>> +#define PMIC_INT1_JIGONR_MASK (0x1 << 4)
>> +#define PMIC_INT1_JIGONF_MASK (0x1 << 5)
>> +#define PMIC_INT1_LOWBAT2_MASK (0x1 << 6)
>> +#define PMIC_INT1_LOWBAT1_MASK (0x1 << 7)
>> +
>> +#define PMIC_INT2_JIGR_MASK (0x1 << 0)
>> +#define PMIC_INT2_JIGF_MASK (0x1 << 1)
>> +#define PMIC_INT2_MR_MASK (0x1 << 2)
>> +#define PMIC_INT2_DVS1OK_MASK (0x1 << 3)
>> +#define PMIC_INT2_DVS2OK_MASK (0x1 << 4)
>> +#define PMIC_INT2_DVS3OK_MASK (0x1 << 5)
>> +#define PMIC_INT2_DVS4OK_MASK (0x1 << 6)
>> +
>> +#define PMIC_INT3_CHGINS_MASK (0x1 << 0)
>> +#define PMIC_INT3_CHGRM_MASK (0x1 << 1)
>> +#define PMIC_INT3_DCINOVP_MASK (0x1 << 2)
>> +#define PMIC_INT3_TOPOFFR_MASK (0x1 << 3)
>> +#define PMIC_INT3_CHGRSTF_MASK (0x1 << 5)
>> +#define PMIC_INT3_MBCHGTMEXPD_MASK (0x1 << 7)
>> +
>> +#define PMIC_INT4_RTC60S_MASK (0x1 << 0)
>> +#define PMIC_INT4_RTCA1_MASK (0x1 << 1)
>> +#define PMIC_INT4_RTCA2_MASK (0x1 << 2)
>> +#define PMIC_INT4_SMPL_INT_MASK (0x1 << 3)
>> +#define PMIC_INT4_RTC1S_MASK (0x1 << 4)
>> +#define PMIC_INT4_WTSR_MASK (0x1 << 5)
>> +
>> +#define MUIC_INT1_ADC_MASK (0x1 << 0)
>> +#define MUIC_INT1_ADCLOW_MASK (0x1 << 1)
>> +#define MUIC_INT1_ADCERROR_MASK (0x1 << 2)
>> +
>> +#define MUIC_INT2_CHGTYP_MASK (0x1 << 0)
>> +#define MUIC_INT2_CHGDETRUN_MASK (0x1 << 1)
>> +#define MUIC_INT2_DCDTMR_MASK (0x1 << 2)
>> +#define MUIC_INT2_DBCHG_MASK (0x1 << 3)
>> +#define MUIC_INT2_VBVOLT_MASK (0x1 << 4)
>> +
>> +#define MUIC_INT3_OVP_MASK (0x1 << 2)
>> +
>> enum max8997_irq {
>> MAX8997_PMICIRQ_PWRONR,
>> MAX8997_PMICIRQ_PWRONF,
>> @@ -364,19 +406,23 @@ enum max8997_irq {
>> MAX8997_PMICIRQ_RTC1S,
>> MAX8997_PMICIRQ_WTSR,
>>
>> - MAX8997_MUICIRQ_ADCError,
>> - MAX8997_MUICIRQ_ADCLow,
>> + MAX8997_PMICIRQ_NR,
>> +};
>> +
>> +enum max8997_irq_muic {
>> MAX8997_MUICIRQ_ADC,
>> + MAX8997_MUICIRQ_ADCLOW,
>> + MAX8997_MUICIRQ_ADCERROR,
>>
>> - MAX8997_MUICIRQ_VBVolt,
>> - MAX8997_MUICIRQ_DBChg,
>> - MAX8997_MUICIRQ_DCDTmr,
>> - MAX8997_MUICIRQ_ChgDetRun,
>> - MAX8997_MUICIRQ_ChgTyp,
>> + MAX8997_MUICIRQ_CHGTYP,
>> + MAX8997_MUICIRQ_CHGDETRUN,
>> + MAX8997_MUICIRQ_DCDTMR,
>> + MAX8997_MUICIRQ_DBCHG,
>> + MAX8997_MUICIRQ_VBVOLT,
>
> ditto.
> I don't understand why do you modify interrnut name/macro.
>
>>
>> MAX8997_MUICIRQ_OVP,
>>
>> - MAX8997_IRQ_NR,
>> + MAX8997_MUCIRQ_NR,
>
> ditto.
>
Here I have splitted enum into few enums, each for single interrupt
source, to make it easier to use with regmap irq handling. So I changed
MAX8997_IRQ_NR name to MAX8997_MUCIRQ_NR because now it's not number of
all interrupts but number of interrupts coming form MUIC.
>> };
>>
>> #define MAX8997_NUM_GPIO 12
>> @@ -397,9 +443,10 @@ struct max8997_dev {
>> struct regmap *regmap_haptic;
>> struct regmap *regmap_muic;
>>
>> + struct regmap_irq_chip_data *irq_data;
>> + struct regmap_irq_chip_data *irq_data_muic;
>> int irq;
>> int ono;
>> - struct irq_domain *irq_domain;
>> struct mutex irqlock;
>> int irq_masks_cur[MAX8997_IRQ_GROUP_NR];
>> int irq_masks_cache[MAX8997_IRQ_GROUP_NR];
>>
>
Thanks,
Robert Baldyga
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
