Hi Carlo, On Fri, Apr 11, 2014 at 11:38:11AM +0200, Carlo Caione wrote: > Signed-off-by: Hans de Goede <[email protected]> > Signed-off-by: Carlo Caione <[email protected]> > --- > > In all the DTs the min and max microvolt allowed for each regulator are > actually > the min and max voltage possible for the regulator itself. This is not safe > but > we do not have the ranges allowed for each board and the original Allwinner > driver does exactly this way. > > AXP20x has the so called Power Path Management (IPS) that can select the > proper > power supply according to the status of the external power and the Li-battery > status. The output of the IPS block is usually a 5V fixed voltage used as > input supply for all the other regulators. This fixed voltage is represented > in the DT as a fixed voltage regulator in the "regulator" subnode. > > arch/arm/boot/dts/sun4i-a10-a1000.dts | 69 +++++++++++++++++++++++ > arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 69 +++++++++++++++++++++++ > arch/arm/boot/dts/sun4i-a10-hackberry.dts | 75 > +++++++++++++++++++++++++ > arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 69 +++++++++++++++++++++++ > arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 75 > +++++++++++++++++++++++++ > arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 75 > +++++++++++++++++++++++++ > arch/arm/boot/dts/sun4i-a10-pcduino.dts | 69 +++++++++++++++++++++++ > arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 70 +++++++++++++++++++++++ > arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 70 +++++++++++++++++++++++ > arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 70 +++++++++++++++++++++++
That looks like a lot of them. Did you test all of them?
Are all those regulators you define used on all these boards?
> 10 files changed, 711 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts
> b/arch/arm/boot/dts/sun4i-a10-a1000.dts
> index fa746aea..029a880 100644
> --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
> @@ -88,6 +88,75 @@
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pins_a>;
> status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
That should be in the DTSI.
> + axp209: pmic@34 {
> + compatible = "x-powers,axp209";
> + reg = <0x34>;
> + interrupts = <0>;
> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + acin-supply = <&axp_ipsout_reg>;
> + vin2-supply = <&axp_ipsout_reg>;
> + vin3-supply = <&axp_ipsout_reg>;
> + ldo24in-supply = <&axp_ipsout_reg>;
> + ldo3in-supply = <&axp_ipsout_reg>;
> + ldo5in-supply = <&axp_ipsout_reg>;
> +
> + regulators {
> + compatible = "x-powers,axp20x-reg";
I told you a few times already, but don't introduce pattern-matching
compatibles.
> +
> + x-powers,dcdc-freq = <1500>;
> +
> + axp_ipsout_reg: axp_ipsout {
> + compatible = "regulator-fixed";
> + regulator-name = "axp-ipsout";
> + regulator-min-microvolt =
> <5000000>;
> + regulator-max-microvolt =
> <5000000>;
> + regulator-always-on;
> + };
> +
> + axp_vcore_reg: dcdc2 {
> + regulator-min-microvolt =
> <700000>;
> + regulator-max-microvolt =
> <2275000>;
> + regulator-always-on;
> + };
> +
> + axp_ddr_reg: dcdc3 {
> + regulator-min-microvolt =
> <700000>;
> + regulator-max-microvolt =
> <3500000>;
> + regulator-always-on;
> + };
> +
> + axp_rtc_reg: ldo1 {
> + regulator-always-on;
> + };
> +
> + axp_analog_reg: ldo2 {
> + regulator-min-microvolt =
> <1800000>;
> + regulator-max-microvolt =
> <3300000>;
> + regulator-always-on;
> + };
> +
> + axp_pll_reg: ldo3 {
> + regulator-min-microvolt =
> <700000>;
> + regulator-max-microvolt =
> <3500000>;
> + };
> +
> + axp_hdmi_reg: ldo4 {
> + regulator-min-microvolt =
> <1250000>;
> + regulator-max-microvolt =
> <3300000>;
> + };
> +
> + axp_mic_reg: ldo5 {
> + regulator-min-microvolt =
> <1800000>;
> + regulator-max-microvolt =
> <3300000>;
> + };
> + };
> + };
> };
> };
>
> diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> index 4684cbe..635fd4b 100644
> --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> @@ -80,6 +80,75 @@
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pins_a>;
> status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + axp209: pmic@34 {
> + compatible = "x-powers,axp209";
> + reg = <0x34>;
> + interrupts = <0>;
> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + acin-supply = <&axp_ipsout_reg>;
> + vin2-supply = <&axp_ipsout_reg>;
> + vin3-supply = <&axp_ipsout_reg>;
> + ldo24in-supply = <&axp_ipsout_reg>;
> + ldo3in-supply = <&axp_ipsout_reg>;
> + ldo5in-supply = <&axp_ipsout_reg>;
> +
> + regulators {
> + compatible = "x-powers,axp20x-reg";
> +
> + x-powers,dcdc-freq = <1500>;
> +
> + axp_ipsout_reg: axp_ipsout {
> + compatible = "regulator-fixed";
> + regulator-name = "axp-ipsout";
> + regulator-min-microvolt =
> <5000000>;
> + regulator-max-microvolt =
> <5000000>;
> + regulator-always-on;
> + };
> +
> + axp_vcore_reg: dcdc2 {
> + regulator-min-microvolt =
> <700000>;
> + regulator-max-microvolt =
> <2275000>;
> + regulator-always-on;
> + };
> +
> + axp_ddr_reg: dcdc3 {
> + regulator-min-microvolt =
> <700000>;
> + regulator-max-microvolt =
> <3500000>;
> + regulator-always-on;
> + };
> +
> + axp_rtc_reg: ldo1 {
> + regulator-always-on;
> + };
> +
> + axp_analog_reg: ldo2 {
> + regulator-min-microvolt =
> <1800000>;
> + regulator-max-microvolt =
> <3300000>;
> + regulator-always-on;
> + };
> +
> + axp_pll_reg: ldo3 {
> + regulator-min-microvolt =
> <700000>;
> + regulator-max-microvolt =
> <3500000>;
> + };
> +
> + axp_hdmi_reg: ldo4 {
> + regulator-min-microvolt =
> <1250000>;
> + regulator-max-microvolt =
> <3300000>;
> + };
> +
> + axp_mic_reg: ldo5 {
> + regulator-min-microvolt =
> <1800000>;
> + regulator-max-microvolt =
> <3300000>;
> + };
> + };
> + };
> };
>
> i2c1: i2c@01c2b000 {
> diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
> b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
> index d7c17e4..8f2db9c 100644
> --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
> @@ -82,6 +82,81 @@
> pinctrl-0 = <&uart0_pins_a>;
> status = "okay";
> };
> +
> + i2c0: i2c@01c2ac00 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pins_a>;
> + status = "okay";
That should be in a separate patch.
These comments apply to most of the changes here. Make sure you edit
all of them.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
signature.asc
Description: Digital signature
