Hi, The current ft5x06 reports to the user-space that its maximum coordinates are, on both X and Y, way higher than what could be actually usable on the screen (in my case, 5759x1151 instead of 480x800).
This causes trouble on some userspace stacks that then try to re-scale these coordinates back to the framebuffer resolution, like QT does. Use the of_touchscreen code to find the real touchscreen limits in the DT case, and report that to the userspace. Thanks, Maxime Changes from v1: - Do not use input_set_abs_params anymore to avoid enabling an axis that was not enabled by the driver itself in of_touchscreen - Emit a warning when an axis is set in the DT but not enabled in the driver - Remove EV_SYN from the edt-ft5x06 driver Maxime Ripard (4): input: touchscreen: of: Use input_set_abs_params input: touchscreen: of: Register multitouch axes input: ft5x06: Allow to set the maximum axes value through the DT input: edt-ft5x06: Remove EV_SYN event report drivers/input/touchscreen/edt-ft5x06.c | 6 ++- drivers/input/touchscreen/of_touchscreen.c | 62 +++++++++++++++++++++++++----- 2 files changed, 57 insertions(+), 11 deletions(-) -- 2.1.1 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html